Jan 26, 2020   10:22 p.m. Tamara
Academic information system

Persons at STU


This page displays all publicly accessible information about the desired person. Some information about the person's occupation and offices may be hidden.

doc. Ing. Štefan Václav, PhD.
Identification number: 2778
University e-mail: stefan.vaclav [at] stuba.sk
 
Docent CSc.,PhD. - Department of Production Devices and Systems (UVTE MTF)

Contacts     Graduate     Lesson     Final thesis     
Projects     Publications     Bodies     Supervised theses     

The following list contains supervised theses at STU.

Use the following filter to restrict the displayed records.

Year of submission:
Type of thesis:

Ord.StateTypeFinal thesisUntilDetails
1.Final thesis is incompleteBTWritten by (author): Matej Bagin
Návrh montáže čerpadla na vodu
May 2017Displaying the final thesis
2.Final thesis was successfully defended.DTWritten by (author): Ing. Daniel Bališ
Návrh montáže záhradného kultivátora
May 2013Displaying the final thesis
3.Final thesis was successfully defended.DTWritten by (author): Ing. Matúš Beňo, PhD.
Návrh zefektívnenia montáže reťazového systému
May 2009Displaying the final thesis
4.Final thesis was successfully defended.BTWritten by (author): Ing. Martin Benovič, PhD.
Návrh montáže strojárskeho výrobku
June 2007Displaying the final thesis
5.Final thesis was successfully defended.DTWritten by (author): Ing. Martin Benovič, PhD.
Návrh výroby a montáže zdvíhacieho zariadenia
May 2009Displaying the final thesis
6.Final thesis was successfully defended.BTWritten by (author): Ing. Miroslav Bezecný
Návrh výroby krytky vo firme RAJEC INDUSTRY spol. s.r.o.
May 2014Displaying the final thesis
7.Final thesis was successfully defended.DTWritten by (author): Ing. Peter Bilovský
Návrh usporiadania montážnych pracovísk a ich automatizácia
December 2008Displaying the final thesis
8.Final thesis was successfully defended.DTWritten by (author): Ing. Branislav Blažej
Montáž vybraného vzduchotechnického zariadenia
December 2008Displaying the final thesis
9.Final thesis was successfully defended.BTWritten by (author): Ing. Dušan Boroš
Návrh fixačného prípravku na testovanie panoramatickej strechy automobilu, SK system, s.r.o.
May 2014Displaying the final thesis
10.Final thesis was successfully defended.DTWritten by (author): Ing. Dušan Boroš
Návrh konštrukcie a montáže pneumatického zariadenia na zváranie plastov ultrazvukom
May 2016Displaying the final thesis
11.Final thesis was successfully defended.DTWritten by (author): Ing. Tomáš Brezovský
Racionalizácia montážneho pracoviska vo firme HB Steel, s.r.o.
May 2017Displaying the final thesis
12.Final thesis was successfully defended.BTWritten by (author): Ing. Tomáš Brezovský
Rozmerové reťazce v montáži
May 2015Displaying the final thesis
13.Final thesis is incompleteDTWritten by (author): Ing. Vladimír Budzel
Návrh montáže protipožiarnych zariadení vo firme Technicom, s.r.o. Komárno
May 2011Displaying the final thesis
14.Final thesis was successfully defended.DTWritten by (author): Ing. Vladimír Budzel
Návrh montáže protipožiarnych zariadení vo firme Technicom, s.r.o. Komárno
May 2011Displaying the final thesis
15.Final thesis is incompleteBTWritten by (author): Bc. Boris Bugár
Návrh montáže francisovej turbíny
June 2012Displaying the final thesis
16.Final thesis was successfully defended.BTWritten by (author): Ing. Matúš Buchan
Návrh montáže asynchrónneho motora
May 2014Displaying the final thesis
17.Final thesis was successfully defended.DTWritten by (author): Ing. Matúš Buchan
Návrh výroby a montáže parného prehrievača
May 2016Displaying the final thesis
18.Final thesis was successfully defended.DTWritten by (author): Ing. Roland Burkuš
Optimalizácia výrobnej fázy pri stavbe lodí
May 2008Displaying the final thesis
19.Final thesis was successfully defended.BTWritten by (author): Ing. Ľubomír Calpaš
Návrh montáže prevodovej skrine
June 2011Displaying the final thesis
20.Final thesis was successfully defended.BTWritten by (author): Bc. Daniel Cíbik
Návrh montáže modelárskeho železničného vozňa
June 2010Displaying the final thesis
21.Final thesis was successfully defended.DTWritten by (author): Ing. Jozef Čelko
Design of a clamping fixture for welding a part of a packaging machine
April 2019Displaying the final thesis
22.Final thesis was successfully defended.BTWritten by (author): Ing. Viktor Čepko
Návrh montáže nábojovej prevodovky
May 2015Displaying the final thesis
23.Final thesis was successfully defended.BTWritten by (author): Ing. Maroš Černý
Návrh montáže turbodúchadla
June 2010Displaying the final thesis
24.Final thesis was successfully defended.DTWritten by (author): Ing. Rastislav Čižmárik
Návrh montáže lisovacieho kontajnera vo firme UT Umwelt und Transporttechnik s.r.o.
May 2010Displaying the final thesis
25.Final thesis was successfully defended.BTWritten by (author): Ing. Jaroslav Daniš
Návrh automatizácie montáže EKOLIFE hydrodynamického meniča v podniku ZF Sachs
May 2014Displaying the final thesis
26.Final thesis was successfully defended.DTWritten by (author): Ing. Jaroslav Daniš
Racionalizácia montážneho pracoviska vo firme ZF Slovakia, a.s., Trnava
May 2017Displaying the final thesis
27.Final thesis was successfully defended.BTWritten by (author): Ing. Daniel Doboš
Návrh montáže garážového systému
June 2010Displaying the final thesis
28.Final thesis was successfully defended.DTWritten by (author): Ing. Daniel Doboš
Racionalizácia výroby a montáže garážového systému
May 2012Displaying the final thesis
29.Final thesis was successfully defended.DTWritten by (author): Ing. Vladimír Dvořák
Vplyv totálne produktívnej údržby na výkonnosť montážnej linky v podmienkach PSA Peugeot Citröen Trnava
December 2008Displaying the final thesis
30.Final thesis was successfully defended.DTWritten by (author): Ing. Róbert Farkas
Návrh výroby a montáže kontajnera vo firme SK – Cont, s.r.o. Komárno
May 2011Displaying the final thesis
31.Final thesis was successfully defended.DTWritten by (author): Ing. Gabriel Fedor
Návrh montážnej linky v podmienkach Samsung Electronics Slovakia, s.r.o.
May 2008Displaying the final thesis
32.Final thesis was successfully defended.DTWritten by (author): Ing. Gabriel Fedor
Počítačová podpora návrhu montážnej linky
May 2008Displaying the final thesis
33.Final thesis was successfully defended.BTWritten by (author): Ing. Zdenko Gergel
Progresívne metódy spájania súčiastok v montáži pomocou skrutkových spojov
May 2015Displaying the final thesis
34.Final thesis was successfully defended.BTWritten by (author): Bc. Andrej Gondár
Návrh montáže crossového bicykla
May 2016Displaying the final thesis
35.Final thesis was successfully defended.DTWritten by (author): Ing. Milan Gubien
Racionalizácia montáže rozvádzača vo firme SLK Elektro, s.r.o. Komárno
May 2011Displaying the final thesis
36.Final thesis is incompleteBTWritten by (author): Viktória Hajtman
Návrh montáže lamelovej časti spojky motocykla
May 2017Displaying the final thesis
37.Final thesis was successfully defended.DTWritten by (author): Ing. Tomáš Hengerics
Návrh a montáž zdvíhacieho zariadenia
May 2008Displaying the final thesis
38.Final thesis was successfully defended.DTWritten by (author): Ing. Ján Hevier
Návrh pásového dopravníka vo firme Manz AG
May 2012Displaying the final thesis
39.Final thesis was successfully defended.BTWritten by (author): Ing. Patrik Homola
Návrh montáže odporového žíhacieho zariadenia
May 2014Displaying the final thesis
40.Final thesis was successfully defended.BTWritten by (author): Ing. Martin Hôrka
Návrh a konštrukcia hydraulického zariadenia na uťahovanie matíc stanoveným momentom
May 2013Displaying the final thesis
41.Final thesis was successfully defended.DTWritten by (author): Ing. Filip Horváth
Development of single-purpose pneumatic chrome strip pressing device
April 2018Displaying the final thesis
42.Final thesis was successfully defended.DTWritten by (author): Ing. Filip Horváth
Návrh prípravku pre montáž úpiniek
May 2017Displaying the final thesis
43.Final thesis was successfully defended.BTWritten by (author): Ing. Filip Horváth
Normovanie montážnych operácií
May 2015Displaying the final thesis
44.Final thesis was successfully defended.BTWritten by (author): Bc. Tomáš Hruška
Návrh montáže generátora vodíkového plynu
May 2015Displaying the final thesis
45.Final thesis was successfully defended.BTWritten by (author): Bc. Adam Husár
Návrh montáže ručnej hustilky
June 2010Displaying the final thesis
46.Final thesis was successfully defended.BTWritten by (author): Ing. Peter Chmelina
Návrh konštrukcie vŕtacieho prípravku
June 2007Displaying the final thesis
47.Final thesis was successfully defended.BTWritten by (author): Ing. Jakub Jardek
Návrh a konštrukcia klopného rámu pre stroj na gravitačné liatie
May 2014Displaying the final thesis
48.Final thesis was successfully defended.DTWritten by (author): Ing. Jakub Jardek
Návrh konštrukcie a montáže uzatváracieho systému pre zlievarenskú pec
May 2016Displaying the final thesis
49.Final thesis was successfully defended.BTWritten by (author): Bc. Zuzana Jošticová
Tvorivé metódy využiteľné v montáži
June 2008Displaying the final thesis
50.Final thesis was successfully defended.BTWritten by (author): Ing. Marián Jurča
Návrh montáže závesného kotla vo firme Protherm, s.r.o.
May 2015Displaying the final thesis
51.Final thesis is incompleteDTWritten by (author): Bc. Ivan Kalnássy
Design and simulation of the robotic workplace
April 2018Displaying the final thesis
52.Final thesis is incompleteDTWritten by (author): Bc. Ivan Kalnássy
Návrh a simulácia robotického pracoviska
May 2017Displaying the final thesis
53.Final thesis was successfully defended.BTWritten by (author): Ing. Tomáš Katrič
Ideový návrh dopravníka určeného na meranie excentricity hriadeľov
May 2013Displaying the final thesis
54.Final thesis was successfully defended.DTWritten by (author): Ing. Tomáš Katrič
Návrh konštrukcie a montáže jednoúčelového stroja v automobilovom priemysle
May 2015Displaying the final thesis
55.Final thesis was successfully defended.DTWritten by (author): Ing. Martin Keresteš
Racionalizácia montážneho pracoviska
May 2010Displaying the final thesis
56.Final thesis was successfully defended.BTWritten by (author): Ing. Michal Klenko
Návrh a montáž akumulátorovej vŕtačky
June 2010Displaying the final thesis
57.Final thesis was successfully defended.DTWritten by (author): Ing. Michal Kollár
Návrh optimalizácie montáže hydraulickej násypky vo firme HF NaJUS, a.s.
May 2015Displaying the final thesis
58.Final thesis was successfully defended.DTWritten by (author): Ing. Lucia Kosnáčová
Návrh montáže stropného chladenia vo firme Thermotech, s.r.o.
May 2010Displaying the final thesis
59.Final thesis was successfully defended.DTWritten by (author): Ing. Jaroslav Kováč
Optimalizácia výroby a montáže skúšobných modulov káblových zväzkov
December 2008Displaying the final thesis
60.Final thesis was successfully defended.BTWritten by (author): Bc. Tomáš Krafčík
Softvéry pre tvorbu dispozičných riešení pre montáž
May 2014Displaying the final thesis
61.Final thesis was successfully defended.BTWritten by (author): Ing. Ján Kresťanko
Montáž zdvíhacieho zariadenia
June 2009Displaying the final thesis
62.Final thesis was successfully defended.BTWritten by (author): Ing. Boris Križan
Návrh montáže diferenciálu
June 2011Displaying the final thesis
63.Final thesis was successfully defended.DTWritten by (author): Ing. Jozef Kršteník
Návrh kontrolného pracoviska pre výrobu podvozkov automobilov
May 2012Displaying the final thesis
64.Final thesis was successfully defended.BTWritten by (author): Ing. Michal Kubala
Návrh montáže kalového čerpadla
May 2015Displaying the final thesis
65.Final thesis was successfully defended.BTWritten by (author): Bc. Michal Kucko
Návrh montáže hydrodynamického meniča vo firme Sachs, s.r.o.
June 2011Displaying the final thesis
66.Final thesis was successfully defended.DTWritten by (author): Ing. Tomáš Kučera
Racionalizácia výrobného procesu
May 2010Displaying the final thesis
67.Final thesis is incompleteDisTWritten by (author): Ing. Šimon Lecký
Návrh metodiky projektovania montážnych pracovísk a systémov
May 2020Displaying the final thesis
68.Final thesis is incompleteDTWritten by (author): Bc. Erik Macek
Návrh racionalizácie montáže palivového systému v podniku Martinrea Slovakia, s.r.o.
May 2014Displaying the final thesis
69.Final thesis was successfully defended.DTWritten by (author): Ing. Marek Macko
Design of an assembly line for the production of a rear car light
April 2019Displaying the final thesis
70.Final thesis was successfully defended.BTWritten by (author): Ing. Marek Macko
Návrh montáže automatickej zbrane
May 2017Displaying the final thesis
71.Final thesis was successfully defended.DTWritten by (author): Ing. Vladimír Macháček
Riešenie vybraných problémov údržby v energetike
December 2008Displaying the final thesis
72.Final thesis was successfully defended.BTWritten by (author): Ing. Jozef Maňko
Montáž a návrh bezpečnostného ventilu
June 2009Displaying the final thesis
73.Final thesis was successfully defended.DTWritten by (author): Ing. Marek Marenčík
Návrh montážneho prípravku na poloautomatickej linke KOMAX vo firme Semikron, s.r.o.
May 2017Displaying the final thesis
74.Final thesis was successfully defended.DTWritten by (author): Ing. Erik Martinka
Návrh modelu vzduchovej zbrane
May 2013Displaying the final thesis
75.Final thesis was successfully defended.BTWritten by (author): Ing. Erik Martinka
Návrh montáže dlhej vzduchovej zbrane
June 2011Displaying the final thesis
76.Final thesis was successfully defended.DTWritten by (author): Ing. Ján Marušinec
Design of assembly of an automated station arm for setting and clamping of a welded part of a car body
April 2018Displaying the final thesis
77.Final thesis was successfully defended.BTWritten by (author): Ing. Ján Marušinec
Návrh montáže zdvíhacieho zariadenia na manipuláciu s motormi
May 2016Displaying the final thesis
78.Final thesis was successfully defended.DTWritten by (author): Ing. Mgr. Zuzana Miklošovičová
Návrh automatického segmentovania spojkových lamiel s kompozitným trecím obložením
May 2015Displaying the final thesis
79.Final thesis was successfully defended.BTWritten by (author): Ing. Mgr. Zuzana Miklošovičová
Návrh usporiadania montážnych pracovísk pre výrobu kompozitných lamiel
May 2013Displaying the final thesis
80.Final thesis was successfully defended.DTWritten by (author): Ing. Víťazoslav Miklovič
Návrh racionalizácie vybraného montážneho pracoviska
May 2012Displaying the final thesis
81.Final thesis is incompleteBTWritten by (author): Bc. Marek Môcik
Hromadné mikrorezanie
June 2012Displaying the final thesis
82.Final thesis was successfully defended.DTWritten by (author): Ing. Vladimír Mosnár
Návrh technologického prípravku na presné vŕtanie
May 2013Displaying the final thesis
83.Final thesis was successfully defended.BTWritten by (author): Ing. Tomáš Muráň
Návrh montáže pneumatického valca
June 2008Displaying the final thesis
84.Final thesis was successfully defended.DTWritten by (author): Ing. Tomáš Muráň
Návrh montážnych pracovísk pre montáž pneumatického valca
May 2012Displaying the final thesis
85.Final thesis was successfully defended.BTWritten by (author): Ing. Daniel Nádaský
Porovnanie montážnych systémov vo firme Magna, s.r.o.
June 2012Displaying the final thesis
86.Final thesis was successfully defended.BTWritten by (author): Ing. Marcel Novák
Návrh montáže lamelovej spojky
June 2009Displaying the final thesis
87.Final thesis was successfully defended.DTWritten by (author): Ing. Viktor Opatík
Design for assembly of a plastic recycling plant
April 2018Displaying the final thesis
88.Final thesis was successfully defended.DTWritten by (author): Ing. Erik Oravec
Modifikácia a montáž spalinovodu reverznej práčky spalín
December 2008Displaying the final thesis
89.Final thesis was successfully defended.DTWritten by (author): Ing. Peter Osuský
Design of automation of the noise measurement of bearings using a robotic arm
April 2018Displaying the final thesis
90.Final thesis was successfully defended.DTWritten by (author): Ing. Peter Pajtina
Návrh demontážneho zariadenia pre údržbu lietadiel
May 2011Displaying the final thesis
91.Final thesis was successfully defended.DTWritten by (author): Ing. Pavel Palček
Návrh a analýza modulárneho uchopovacieho systému v automobilovom priemysle
May 2015Displaying the final thesis
92.Final thesis was successfully defended.DTWritten by (author): Ing. Alexandra Pallósová
Návrh montáže a demontáže čerpadla v spoločnosti Slovnaft, a.s.
May 2011Displaying the final thesis
93.Final thesis was successfully defended.DTWritten by (author): Ing. Róbert Pätoprstý
Návrh montáže bezpečnostných zariadení
May 2010Displaying the final thesis
94.Final thesis was successfully defended.BTWritten by (author): Ing. Róbert Pätoprstý
Návrh montáže svietidla
June 2008Displaying the final thesis
95.Final thesis was successfully defended.BTWritten by (author): Bc. Martin Petráš
Optimization assembly on pre-frames machinery Netstal
May 2018Displaying the final thesis
96.Final thesis was successfully defended.DTWritten by (author): Ing. Peter Pikna
Návrh konštrukcie a montážneho postupu lamelového dopravníka
May 2016Displaying the final thesis
97.Final thesis was successfully defended.BTWritten by (author): Bc. Jozef Porubčan
Návrh výroby konzoly vo firme Strojspol s.r.o.
May 2013Displaying the final thesis
98.Final thesis was successfully defended.BTWritten by (author): Ing. Radoslav Porubský
Počítačová podpora návrhu nádrže
June 2007Displaying the final thesis
99.Final thesis was successfully defended.DTWritten by (author): Ing. Šimon Puvák
Návrh konštrukcie prípravku vo firme Semikron, s.r.o.
May 2015Displaying the final thesis
100.Final thesis was successfully defended.DTWritten by (author): Ing. Andrej Radošovský
Design for the implementation and optimization of the assembly line at COAVIS Slovakia, s.r.o. Hlohovec
April 2018Displaying the final thesis
101.Final thesis was successfully defended.DTWritten by (author): Ing. Peter Rakús
Návrh montáže zapaľovača
May 2007Displaying the final thesis
102.Final thesis is incompleteBTWritten by (author): Jozef Semelý
Návrh montáže trecej lamelovej spojky
June 2011Displaying the final thesis
103.Final thesis was successfully defended.BTWritten by (author): Bc. Dávid Skladaný
Design of hoisting mechanism for passenger cars
May 2018Displaying the final thesis
104.Final thesis is incompleteBTWritten by (author): Bc. Dávid Skladaný
Návrh montáže zdvíhacieho mechanizmu pre osobné automobily
May 2017Displaying the final thesis
105.Final thesis was successfully defended.BTWritten by (author): Ing. Vladimír Soviš
Elektronické stabilizačné systémy automobilu a ich montáž
June 2008Displaying the final thesis
106.Final thesis was successfully defended.DTWritten by (author): Ing. Petronela Spustová
Racionalizácia montážnych pracovísk
May 2011Displaying the final thesis
107.Final thesis was successfully defended.DTWritten by (author): Ing. Bohumil Struška
Automatizácia balenia výrobkov v spoločnosti Würth International Trading, s.r.o.
May 2012Displaying the final thesis
108.Final thesis was successfully defended.BTWritten by (author): Ing. Bohumil Struška
Návrh kontroly spojovacieho materiálu vo firme WURTH International trading s.r.o.
June 2010Displaying the final thesis
109.Final thesis was successfully defended.BTWritten by (author): Bc. Martin Ševcech
Montáž strojárskeho výrobku
June 2008Displaying the final thesis
110.Final thesis was successfully defended.DTWritten by (author): Ing. Rastislav Ševčík
Návrh výroby a montáže bezpečnostných dverí
May 2008Displaying the final thesis
111.Final thesis was successfully defended.BTWritten by (author): Bc. Jozef Šintal
Návrh montáže pre výrobu LCD televízora
June 2009Displaying the final thesis
112.Final thesis was successfully defended.DTWritten by (author): Ing. Ladislav Takács
Racionalizácia montážneho pracoviska vo firme Technogym E.E. s.r.o.
May 2009Displaying the final thesis
113.Final thesis was successfully defended.BTWritten by (author): Ing. Martin Talába
Návrh montáže vzduchotechnickej jednotky vo firme Bat-Klima, s.r.o.
May 2016Displaying the final thesis
114.Final thesis was successfully defended.BTWritten by (author): Bc. Miroslav Tóth
Racionalizácia montážneho pracoviska v spoločnosti Mühlbauer AG.
June 2012Displaying the final thesis
115.Final thesis is incompleteDTWritten by (author): Bc. Marek Uličný
Návrh montáže výparníkového zväzku
May 2010Displaying the final thesis
116.Final thesis is submittedDTWritten by (author): Bc. Marek Vajla
Utilisation of CA technologies and design of assembly of selected engineering product in PROTHERM PRODUCTION, s.r.o.
April 2019Displaying the final thesis
117.Final thesis was successfully defended.BTWritten by (author): Ing. Marek Vaľo
Návrh montáže multifunkčnej zostavy Hi-pot
June 2012Displaying the final thesis
118.Final thesis was successfully defended.DTWritten by (author): Ing. Marek Vaľo
Návrh prototypu dopravného zariadenia
May 2014Displaying the final thesis
119.Final thesis was successfully defended.BTWritten by (author): Ing. Martin Vnučko
Číslicové riadenie výrobných strojov
June 2007Displaying the final thesis
120.Final thesis was successfully defended.DTWritten by (author): Ing. Peter Vook
Animácia a simulácia v montáži
December 2007Displaying the final thesis
121.Final thesis is incompleteBTWritten by (author): Jakub Vozárik
Návrh 3D modelu a montáž viac dielneho aludisku
May 2014Displaying the final thesis
122.Final thesis is incompleteDTWritten by (author): Bc. Michal Vydrnák
Design of the assembly procedure of the scissor line
April 2019Displaying the final thesis
123.Final thesis was successfully defended.BTWritten by (author): Ing. Marek Zemko
Návrh montáže audio zosilňovača
June 2011Displaying the final thesis
124.Final thesis is incompleteBTWritten by (author): Ing. Jakub Žitniak
Návrh montážneho prípravku vo firme W. Lubas Special Plastik
May 2014Displaying the final thesis
125.Final thesis was successfully defended.BTWritten by (author): Ing. Jakub Žitniak
Návrh montážneho prípravku vo firme W. Lubas Special Plastik
May 2015Displaying the final thesis
126.Final thesis was successfully defended.DTWritten by (author): Ing. Marek Žovinec
Návrh racionalizácie vybraného montážneho pracoviska v podniku RF, s. r. o. Malacky
May 2013Displaying the final thesis

Key (click to show/hide)
BTBachelor thesis
DTDiploma thesis
DisTDissertation thesis
DisThPrDissertation thesis propositions
FtMBAFinal MBA thesis
Final thesisFinal thesis
FT(ILL)Final thesis - foreign students
FT(FS)Final thesis - Institute for Lifelong Learning
HabTHabilitation thesis
RigTRigorous thesis
Final thesis is incompleteFinal thesis is incomplete
Final thesis was unsuccessfully defended.Final thesis was unsuccessfully defended.
Final thesis was successfully defended.Final thesis was successfully defended.
Final thesis is submittedFinal thesis is submitted
Final thesis is in progressFinal thesis is in progress