Feb 17, 2020   1:49 p.m. Miloslava
Academic information system

Persons at STU


This page displays all publicly accessible information about the desired person. Some information about the person's occupation and offices may be hidden.

prof. Ing. Peter Grgač, CSc.
Identification number: 4174
University e-mail: peter.grgac [at] stuba.sk
 
Profesor CSc.,PhD. - Institute of Materials (MTF)

Contacts     Lesson     Projects     Publications     Bodies     Supervised theses     

The following list contains supervised theses at STU.

Use the following filter to restrict the displayed records.

Year of submission:
Type of thesis:

Ord.StateTypeFinal thesisUntilDetails
1.Final thesis was successfully defended.BTWritten by (author): Ing. Peter Czibor
Analýza trecích segmentov kotúčových bŕzd osobných automobilov
June 2008Displaying the final thesis
2.Final thesis was successfully defended.BTWritten by (author): Bc. Barbora Ďorďová
Moderné viacfázové ocele so zvýšenou pevnosťou
June 2006Displaying the final thesis
3.Final thesis was successfully defended.BTWritten by (author): Ing. András Gábor
Analýza brzdového kotúča z osobného automobilu Škoda Felícia
June 2009Displaying the final thesis
4.Final thesis is incompleteBTWritten by (author): Ing. András Gábor
Analýza telesa brzdového kotúča predného kolesa vozidla Škoda Felícia
June 2008Displaying the final thesis
5.Final thesis was successfully defended.BTWritten by (author): Ing. Ján Holič
Analýza rezných klinov doštičiek zo spekaných karbidov po obrábaní ložiskovej ocele
June 2008Displaying the final thesis
6.Final thesis was successfully defended.BTWritten by (author): Bc. Martin Hollý
Influence of the austenitization parameters on the microstructure and hardness of the 100Cr6 steel
May 2019Displaying the final thesis
7.Final thesis was successfully defended.BTWritten by (author): Ing. Jakub Joščák
Analýza použitého brzdového kotúča z osobného automobilu typu BMW
May 2017Displaying the final thesis
8.Final thesis was successfully defended.BTWritten by (author): Ing. Juraj Mikoláš, PhD.
Porovnanie mikroštruktúr valcovej frézy a pílového listu rámovej píly vyrobených z nástrojovej ocele
June 2007Displaying the final thesis
9.Final thesis was successfully defended.BTWritten by (author): Bc. Peter Nagy
Analýza použitých pilníkov na kovy
June 2009Displaying the final thesis
10.Final thesis was successfully defended.BTWritten by (author): Bc. Martin Néma
Analysis of damaged circular saw blade
May 2018Displaying the final thesis
11.Final thesis was successfully defended.BTWritten by (author): Bc. Peter Orihel
Microscopic analysis of damaged tube from steam boiler
May 2019Displaying the final thesis
12.Final thesis was successfully defended.BTWritten by (author): Ing. Filip Paulovič
Analýza mikroštruktúry ocelí po plastickej deformácii za studena
May 2017Displaying the final thesis
13.Final thesis was successfully defended.BTWritten by (author): Ing. Imrich Pavúček
Analýza lisovaných ložiskových klietok vyrobených z oceľových rúrok
May 2017Displaying the final thesis
14.Final thesis was successfully defended.BTWritten by (author): Bc. Tomáš Petrek
Analysis of worn inserts made of sintered carbides
May 2018Displaying the final thesis
15.Final thesis was successfully defended.BTWritten by (author): Ing. Adam Raksányi
Metalografická analýza vrtáka z rýchloreznej ocele
June 2007Displaying the final thesis
16.Final thesis was successfully defended.BTWritten by (author): Ing. Denis Seres
Analýza poškodených žiaroviek s volfrámovým vláknom
May 2017Displaying the final thesis
17.Final thesis was successfully defended.BTWritten by (author): Ing. Radovan Sloboda
Makroskopická a mikroskopická analýza kontaktov elektrických ističov
June 2007Displaying the final thesis
18.Final thesis was successfully defended.BTWritten by (author): Ing. Zuzana Slobodová
Analýza telesa brzdového valca zo zadného kolesa vozidla Škoda Felícia
June 2008Displaying the final thesis
19.Final thesis was successfully defended.BTWritten by (author): Ing. Branislav Uhrinec
Analýza opotrebovaných nožov používaných v drevárskom priemysle
June 2008Displaying the final thesis
20.Final thesis was successfully defended.DisTWritten by (author): Ing. Miroslav Béger, PhD.
Príprava, štúdium vybraných vlastností a charakterizácia povlakov nitridov chrómu na nástrojovej oceli
May 2012Displaying the final thesis
21.Final thesis was successfully defended.DisTWritten by (author): Ing. Peter Marek, PhD.
Vplyv plastickej deformácie na koróznu odolnosť austenitických nehrdzavejúcich ocelí
August 2010Displaying the final thesis
22.Final thesis was successfully defended.DisTWritten by (author): Ing. Viktória Sedlická, PhD.
Vývoj štruktúry a fázového zloženia pri difúznom boridovaní nástrojových ocelí ledeburitického typu
February 2010Displaying the final thesis
23.Final thesis was successfully defended.DTWritten by (author): Ing. Ladislav Calpaš
Laserové značenie povrchov ocele a titánovej zliatiny
May 2007Displaying the final thesis
24.Final thesis was successfully defended.DTWritten by (author): Ing. Peter Czibor
Metalografická a fraktografická analýza povlakovaných rezných nástrojov
May 2010Displaying the final thesis
25.Final thesis was successfully defended.DTWritten by (author): Ing. Ján Holič
Mikroskopická analýza opotrebenia vymeniteľných doštičiek zo spekaných karbidov po sústružení ocele 100Cr6
May 2012Displaying the final thesis
26.Final thesis is incompleteDTWritten by (author): Ing. Ján Holič
Mikroskopická analýza opotrebenia vymeniteľných doštičiek zo spekaných karbidov v procese sústruženia ocele 100Cr6
May 2010Displaying the final thesis
27.Final thesis was successfully defended.DTWritten by (author): Ing. Michal Kapusňák, PhD.
Influence of cobalt on internal porosity and microstructure of rapidly solidified particles and compacts of high speed steels S590 and S790 Microclean
May 2008Displaying the final thesis
28.Final thesis is in progressDTWritten by (author): Bc. Martin Néma
Experimental determination of the crystallization nuclei number in rapidly solidified powder particles
April 2020Displaying the final thesis
29.Final thesis is in progressDTWritten by (author): Bc. Tomáš Petrek
Characterization of powders and sintered steel samples
April 2020Displaying the final thesis
30.Final thesis was successfully defended.DTWritten by (author): Ing. Radovan Sloboda
Analýza poškodenia povrchov elektrických kontaktov
May 2009Displaying the final thesis
31.Final thesis was successfully defended.DTWritten by (author): Ing. Branislav Uhrinec
Analýza opotrebených roztrieskovacích nožov
May 2010Displaying the final thesis
32.Final thesis was successfully defended.DTWritten by (author): Ing. Ľubomír Vlk
Metalografická a fraktografická analýza zlomenej torznej pružiny
May 2017Displaying the final thesis
33.Final thesis was successfully defended.DTWritten by (author): Ing. Zdenka Vrábová
Analýza mikroštruktúry hutníckych polotovarov z rýchloreznej ocele
May 2009Displaying the final thesis

Key (click to show/hide)
BTBachelor thesis
DTDiploma thesis
DisTDissertation thesis
DisThPrDissertation thesis propositions
FtMBAFinal MBA thesis
Final thesisFinal thesis
FT(ILL)Final thesis - foreign students
FT(FS)Final thesis - Institute for Lifelong Learning
HabTHabilitation thesis
RigTRigorous thesis
Final thesis is incompleteFinal thesis is incomplete
Final thesis was unsuccessfully defended.Final thesis was unsuccessfully defended.
Final thesis was successfully defended.Final thesis was successfully defended.
Final thesis is submittedFinal thesis is submitted
Final thesis is in progressFinal thesis is in progress