Oct 30, 2020   6:16 p.m. Simona, pamätný deň - Výročie Deklarácie slovenského národa
Academic information system

Summary of topics offered - Faculty of Materials Science and Technology in Trnava


Application shows list of current and approved topics offered under the selected department or under all its subordinate departments. You can limit the list of topics by the following criteria:

Use the following filter to restrict the displayed records.

Type of thesis:
Programme:
Topic supervisor:
Supervising department:

* | A | B | C | D | E | F | G | H | Ch | I | K | L | M | N | O | P | R | S | T | U | V | W | 3

Ord.
Type
Topic
Thesis supervisor
Supervising department
Programme
Intended for
Details
Occupied/Max.Project participants
1.
BT
Wire assisted additive manufacturing of light weight alloys
Institute of Production Technologies (MTF)
B-VTEMTF
Details of topic
1 / 1
Kamhal, J.
2.
BT
Additive technologies used for biomedical parts productionŠugár, P.
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
2 / --
Šedivá, D.
Letkovič, J.
3.DTAnalysis and evaluation of images obtained using thermocameraZahradníková, B.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / 2
--
4.
DT
Risk analysis of additive manufacturingBuranská, E.Department of Safety Engineering (UIBE MTF)I-IBE
MTF
Details of topic1 / 1 Kijovská, M.
5.
DTAnalysis of deformations caused by heat treatment in the production of shaped parts
Institute of Production Technologies (MTF)
I-PPNMTF
Details of topic
1 / -- Vlk, E.
6.
BT
Analysis of electroerosive machining in the conditions of the company ZF Slovakia a.s.
Görög, A.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1 Jobek, P.
7.
BT
Analysis of the implementation of hybrid processes for joining steel cold-formed carbody parts
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
8.
BT
Analysis of the possibilities of the production innovation of reductions for the TFSI engine ignition coil wiring harness with the use of additive manufacturingInstitute of Production Technologies (MTF)
B-VTVM
MTFDetails of topic
1 / 1
Bartal, R.
9.
DTAnalysis of the failure of the production of glass plates in the company Osram, a.s.Matúšová, M.Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic
1 / 1
Čulík, M.
10.
BTAnalysis of the causes of a specific problem with the possibility of simple tools and methods of quality managementMĺkva, M.
Institute of Industrial Engineering and Management (MTF)
B-KPR
MTF
Details of topic
0 / 2
--
11.
DT
Analysis of processes and productivity increasing of part assembly by MTM methodologyHrušková, E.Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic0 / ----
12.
DT
Risk analysis by the handling of toxic substances in a chemical laboratory
Department of Safety Engineering (UIBE MTF)I-IBEMTFDetails of topic
1 / 1
Jadrná, M.
13.
BT
Analysis of the current state in the field of applications and software for welding and joining materials
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / ----
14.
BT
Analysis of the current state of welding jigs for robotized workplaces
Kostolný, I.Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic1 / 1
15.
DTAnalysis of the trimetals Cu-Al -AlMg fabricated by explosion welding
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
0 / 1
--
16.
DT
Analysis of the trimetals Cu-Al -AlMg fabricated by explosion welding
Marônek, M.
Institute of Production Technologies (MTF)
I-VTVMMTF
Details of topic
0 / 1--
17.DT
Analysis of bottlenecks in the chosen line
Važan, P.Institute of Industrial Engineering and Management (MTF)
I-PMA
MTF
Details of topic
1 / 1
18.DTAnalysis of TOO size and structure changes for large bevel angles of carbon steel produced by thermal cuttingInstitute of Production Technologies (MTF)
I-ZASM
MTFDetails of topic
0 / --
--
19.
BT
Data analysis of coronavirus SARS-CoV-2 pandemic.
Budjač, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic0 / 1
--
20.
DT
Risk analysis of selected machinery according to STN EN ISO 12 100
Buranská, E.Department of Safety Engineering (UIBE MTF)I-IBE
MTF
Details of topic
1 / 1
21.BT
Program to solve a system of linear equations in C
Vrábeľ, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
3 / 3
22.
BT
Application for simulation of dynamic changes of material structures; origami/kirigami principle; MuPAD (MATLAB)
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
0 / --
--
23.
BTApplication for simulation of dynamic changes of material structures; rosette-like formations; MuPAD (MATLAB)Markechová, I.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
24.
DT
Application for early warning of line stoppage or endangerment of end customers through the information system
Važan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
0 / 1--
25.BTSoftware for analysis of amplitude variability in time seriesDobrotka, A.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
Latkóczy, I.
26.
BT
Application for editing input APDL files of the ANSYS programme
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
0 / ----
27.
BT
Application for editing input APDL files for the ANSYS programme
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic0 / ----
28.BTAutomatická navíjačka indukčných cievokNemlaha, E.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic
0 / --
--
29.
DTAutomatizácia testovacích činností vybraného modulu finančnej inštitúcieTanuška, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / -- Vačko, M.
30.DTData acquisition automation and crystallization process control
Institute of Materials (MTF)
I-AIPPMTFDetails of topic
0 / 1
--
31.BT
Safety of additive manufacturing in relation fine particles
Buranská, E.Department of Safety Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / 1
--
32.
BT
Safety aspects of industrially synthesized nanoparticles
Kucmanová, A.Department of Safety Engineering (UIBE MTF)
B-IBE
MTFDetails of topic
0 / --
--
33.
DT
Risks of chosen machines
Martinka, J.
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1
Lorinc, D.
34.BT
CMS systém pre UIAM
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic
0 / --
--
35.
DT
Diagnostics an advanced maintenance tool
Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic1 / 1 Krajčovič, E.
36.BT
Remote-controlled model of the two-wheeled Segway vehicle
Ďuriš, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / -- Martinka, I.
37.
DT
Digital twins of production line
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Pulišová, S.
38.
DT
Embedded applications with RTOS support onSTM32, EPS8266, ESP32 MCU
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / 1
39.
DT
Environmental suitable tratment of coffee wasteÚstav integrovanej bezpečnosti (MTF)I-IBE
MTF
Details of topic
1 / 1
40.
BT
Ergonomics difficulty in assembly line
Hrušková, E.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / ----
41.
DT
Erodological survey of the Bubeník (Trstená)
Sirotiak, M.
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1
42.
DT
Evaluacia autenticity spravodajskych clankov na baze machine learningu
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1 Šrámek, M.
43.
BT
Generative design of engineering components
Institute of Production Technologies (MTF)
B-PPTMTF
Details of topic
1 / 1
Hrbáček, L.
44.
DT
Harmonic analysis of the roundness profile
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1 Schuster, M.
45.DTHarmonic analysis of the surface roughness profileGörög, A.Institute of Production Technologies (MTF)I-PPNMTFDetails of topic0 / 1
--
46.
DTVoice commands for devices control implemented in a microcontroller.Schreiber, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / 1
47.
BT
Evaluation of mineral and table waters
Michalíková, A.Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic1 / 1 Podešva, R.
48.
DT
Evaluation of the use of personal protective equipment (PPE) in a laboratory
Department of Safety Engineering (UIBE MTF)
I-IBE
MTF
Details of topic
0 / ----
49.
BT
Life cycle evaluation of electrodes for resistance butt welding
Bárta, J.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic1 / --
50.
DT
HW modeule for mechanical vibration analysis
Ďuďák, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
51.DT
HW module for noise vibration
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Ravas, M.
52.
BT
Hybrid Manufacturing Systems
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
53.
BT
Hydrometallurgical extraction of silver from used x-raysWachter, I.
Department of Environmental Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / --
--
54.
DTIdentification of hazards related to rail defects on ŽSR train tracks.
Department of Safety Engineering (UIBE MTF)
I-IBE
MTF
Details of topic
1 / 1
Botka, M.
55.DT
Identification of objects with variable period in astronomical observations using neural networks
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
56.
DTConceptual design of laser device innovation for the production of metal parts by the method of additive productionRužarovský, R.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTFDetails of topic1 / 1 Richnák, M.
57.
BT
Implementation of a CNC grooving head on multiple spindle lathes
Institute of Production Technologies (MTF)
B-VZS
MTFDetails of topic1 / 1
58.BT
Implementation of e-learning into classical teaching for the subject Production Technology
Institute of Production Technologies (MTF)
B-VZSMTFDetails of topic0 / 3
--
59.
DT
Implementation of object camera recognition capabilities into a trainning robotic station using an IRB 120 robot
Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic0 / 1
--
60.BTImplementation of measuring system for 3 axis CNC milling machine controlled by arduino module
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic1 / 1 Gazdík, M.
61.
DT
aaaInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / -- Karelová, N.
62.DTImplementácia strojového videnia v riadení robotizovaného pracoviskaInstitute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / --
63.
BT
Information system for fitness center
Střelec, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / 1 Pašková, V.
64.
BT
Information system for hair salon
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic
1 / 1
65.
DT
Information system for moving company
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / 1 Krajčovič, L.
66.
DT
Initiation parameters of spruce wood
Ústav integrovanej bezpečnosti (MTF)
I-IBEMTF
Details of topic
1 / --
67.BTIncremental processes in metal formingInstitute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
1 / 1
Novajovský, J.
68.
BT
Information system for shop with moddeling accessories
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic1 / 1
69.
BTInormation system for public screening of moviesInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic
1 / 1
Madarász, T.
70.BTInnovative methods and practices electro-pneumatic controlMatúšová, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
71.BT
Creation of e-study materials
Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic1 / 1 Straka, P.
72.
BT
Inovative methods and processes of pneumatics controllingHrušková, E.Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
0 / --
--
73.DTIntegrating data sources for the purpose ofInstitute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic1 / 1
74.
DT
Calibration of tactile sensors with a view to increasing the life of the sensorInstitute of Production Technologies (MTF)I-VZSMTF
Details of topic
1 / 1 Fuksa, J.
75.DTSorting TrolleyMorovič, L.Institute of Production Technologies (MTF)I-PPNMTF
Details of topic
1 / --
76.
DT
Complex measurement of selected components using an optical 3D scannerInstitute of Production Technologies (MTF)
I-VTVM
MTFDetails of topic0 / 1--
77.DT
Communication security of industrial networks and IoT devices.
Halenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / 1
--
78.
BT
Design and creation of 3D models tool for profile bending
Bílik, J.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic
1 / 1
79.BTForming tool design on bendingBílik, J.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
80.
DT
Proposal of design and production process operations for plastic cover of CMR-IBílik, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
81.
DT
Design and development of diagnostic equipment jigs for automated calibration controlled by a computerBožek, P.
Institute of Production Technologies (MTF)
I-VZSMTF
Details of topic
1 / 2
82.
BT
Design of a tool for the operation of assembling a plastic ring in a clutch bearingKusá, M.Institute of Production Technologies (MTF)
B-VZS
MTFDetails of topic
1 / 1
Kuba, M.
83.BT
Design of sheet metal forming tool
Institute of Production Technologies (MTF)B-VTEMTF
Details of topic
0 / 1--
84.BT
Engineering design of the fixture for specific system
Kusá, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 2--
85.
BT
Design of the jig expanding the possibilities of the machine in the production of threadsKusá, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1
Kadák, M.
86.
BT
Design of the shaft bearing in the lid of the containerKusá, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / --
87.DTGeometry inspection of cutting tools by optical 3D scanner
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic
2 / 1
88.
DT
Webový informačný systém technického zameraniaInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / -- Lančarič, M.
89.DTLaser modified surfaces of dental implants
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / -- Antala, R.
90.
DT
Laser engraving and cutting machineŠugár, P.
Institute of Production Technologies (MTF)
I-VTVMMTF
Details of topic
1 / --
91.
BT
Laser polishing
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / --
--
92.DTLaser polishing of biocompatible material surfacesŠugár, P.Institute of Production Technologies (MTF)I-OAT
MTF
Details of topic
1 / --
93.DTLaser micromachining of Ti-C composite material
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / --
94.
DT
Laser modified surfaces of forming toolsŠugárová, J.
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / 1
95.
BT
Macros in Powermill softwareInstitute of Production Technologies (MTF)B-PPTMTFDetails of topic
0 / 1
--
96.
BT
Manual for working with the collaborative robot DOBOT Magician
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
97.
DT
Mechanical properties of "transparent wood"Department of Environmental Engineering (UIBE MTF)
I-IBE
MTFDetails of topic
0 / --
--
98.
BT
Meranie kvality vody v záhradnom jazierku
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / --
99.
BTMeasurement of effective surface of monolithic millVozár, M.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
0 / 1
--
100.
BT
Methods of measurement of microgeometry of machining toolsVozár, M.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
0 / 1
--
101.
BT
A component sorting workplace model based on the Arduino programmable module
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / --
102.BTA component sorting workplace model based on the Arduino programmable moduleĎuriš, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 1
--
103.
BT
The model of self-stabilizing platformInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZMTFDetails of topic1 / -- Peško, F.
104.
DT
Modeling and simulation of machined surface roughness
Peterka, J.Institute of Production Technologies (MTF)I-PPNMTF
Details of topic
1 / 2
Veselý, M.
105.
DisT
Modeling and simulation of selected processes and characteristics of the cutting processPeterka, J.Department of Machining and Computer-aided Technologies (UVTE MTF)D-STAMMTFDetails of topic
0 / --
--
106.
DisT
Modeling and simulation of selected characteristics of the cutting process
Institute of Production Technologies (MTF)
D-STAM
MTFDetails of topic
0 / 5
--
107.
BT
Modeling of roughness profile of turned surface
Görög, A.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / 1
--
108.
BT
Modeling of sheet components in software Fusion 360 & Inventor
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Babuliak, A.
109.
DT
Modeling tool life in cutting process
Necpal, M.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic0 / ----
110.
BT
The modelling of forming technological process - cutting
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
111.
BT
The modelling of forming technological process - open die forging
Sobota, R.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / --
--
112.
BT
The modernization of forging line with forging press LZK 4000 in conditions of HKS Forge, s.r.o.
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic1 / 1
113.
BT
Modernization of the network infrastructure of a medium-sized enterpriseInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / 1
114.DT
Monitoring the parameters of industrial equipment using OPC-UA
Halenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic0 / 1
--
115.
BT
Possibilities of joining copper to steel
Kovačócy, P.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / -- Rences, A.
116.BT
Possibilities of modification active parts of metal forming tools
Šugárová, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic0 / 1
--
117.
BTPossibilities of using the Siemens NX Mechatronics Concept Designer for the design of automated manufacturing deviceRužarovský, R.
Department of Production Devices and Systems (UVTE MTF)
B-VZSMTFDetails of topic1 / 1
118.DT
Possibilitie of blockchain technology
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1 Kotasz, Á.
119.
DTMožnosti využitia virtuálnej reality pre podporu výučby v oblasti automatizácie.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 2
--
120.
BT
Ways of securing communication networks
Halenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1 Znamenák, J.
121.BT
Design and implementation API for sensoric system
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
1 / 1 Pačes, V.
122.
BT
Design and implementation IoT module
Ďuďák, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
1 / 1
123.BT
Design and implementation IP/serial converter
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
124.BT
Návrh a implementácia systému údržby pre firmu VUNAR Product a.s.
Tanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic1 / -- Szabó, Ľ.
125.
BTDesign and preparation of production models for precision casting
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
126.
BTDesign and implementation of an electronic tool for calculating the parameters of cutting layers for the selected machining technology.Moravčíková, J.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
Veverka, J.
127.BT
IS
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / -- Krištek, A.
128.DTNávrh a realizácia portálu pre podporu výučby predmetu Programovateľné logické automatyNémeth, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic
1 / 1
129.DTNávrh a realizácia riadiaceho programu a vizualizácie pre dopravníkový pásInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1
130.
BT
Design and realization of control program and visualization for choosen part of line MPS500 with data collection
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
Horváth, A.
131.
BTNavrh a realizácia riadiaceho systému pre otočné montážne lôžkoNemlaha, E.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTFDetails of topic1 / --
132.BT
Design and implementation of control circuits for stepper / DC motors for the Linux CNC platform
Horváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
133.
DT
Návrh a realizácia SCADA systému pre vybraný procesNémeth, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
134.
DT
Design and implementation of a system for collecting, processing and visualizing the results of automated software tests
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
135.
BTDesign and implementation of a system for a company providing cleaning servicesIringová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic1 / --
136.
BTDesign and implementation of a system for renting tools and equipment
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
1 / --
137.
DT
Návrh a realizácia virtuálneho modelu vybraného pracoviska výrobnej linky MPS500
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
4 / 5
138.BT
Design and simulation of a robotic workplace using by ABB RobotStudio
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ
MTF
Details of topic
1 / 1
139.
BT
Design and simulation of component production in the Catia programPokorný, P.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / -- Dubnička, M.
140.
BT
Design and creation of the case studies in the augmented reality environment with a focus on the engineering industry
Holubek, R.Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic0 / --
--
141.BTDesign and manufacture of special 3D printer
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1 Holický, M.
142.DT
Design and manufacture of positioning fixature of optical imaging device
Institute of Production Technologies (MTF)
I-PPNMTF
Details of topic
1 / 1
143.
DT
Design and manufacturing of cutting tool for finishing operation
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
Miček, J.
144.
DT
Design and production of a component in the conditions of EKOM spol. Ltd.
Pokorný, P.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / -- Boor, M.
145.
BT
Design and manufacturing of chess pieces using additive technology
Hrbál, J.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1 Nečas, D.
146.
BT
Design and production of a selected part using CAD software and Rapid Prototyping technologyMilde, J.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic0 / 1--
147.BTDesign and production of an educational model of the mechanism for the subject fixtures
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 2
--
148.
BT
Design and manufacturing of samples for precision castingBuranský, I.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
149.
DT
Design and development of universal gripper for handling plastic productsKusá, M.Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic0 / 1--
150.
DT
Návrh a implementácia detekcie pravdivosti informácii z textu
Špendla, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic0 / 1
--
151.
DT
IS
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic
1 / --
152.
DTDesign and implementation of a software sensor for ion-beam optics control of the 500 kV ion implanter at MTF STU
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
153.
DT
Design and comparison of measurement methods of selected component parameters
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic0 / ----
154.
BT
Actuator design based on SMART materialsRolník, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTFDetails of topic
1 / 1
Pukanec, M.
155.
DT
Design of algorithms and neural networks for predictive control of nonlinear mechatronic systems
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
0 / ----
156.BT
Design of the automatic parking algorithm based on the Arduin system
Rolník, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ
MTF
Details of topic1 / 1
157.
BT
Design and implementation of an electronic tool for calculating the parameters of cutting layers for the selected machining technology.
Moravčíková, J.Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
0 / 1
--
158.
BT
ISJuhásová, B.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 2
--
159.BTNávrh a realizácia informačného systému pre evidovanie COVID19 testovŠpendla, L.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic
1 / 1
160.
DT
Design and implementation of information system for the department of traumatology of Trnava hospital
Križanová, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1 Krasňan, P.
161.
DT
Design and implementation of an integrated information system for the company TUMA INVESTIringová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
162.
BTNávrh a realizácia IS pre autobazárNemlaha, E.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic1 / -- Dendiš, P.
163.
BT
Návrh a realizácia programu na riadenie a vizualizáciu vetrania garáže
Špendla, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic1 / 1
164.
DTDesign and implementation of a system for a company providing reconstruction workIringová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic0 / --
--
165.
DT
Proposal and implementation of a system for robotic testing of web applications.
Halenár, I.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Kubiš, M.
166.
DT
Návrh a realizácia zariadenia na meranie elektrických parametrov výkonových modulov
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
167.
DT
Design and simulation of a robotic workplace in Tecnomatix Process Simulate
Ružarovský, R.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
Details of topic
2 / 2
Šumichrast, D.
Prosňanský, M.
168.DTDesign of parts automatic loading into workplace of Bimeric machine in Schaeffler ltd.Hrušková, E.
Institute of Production Technologies (MTF)
I-VZS
MTFDetails of topic
0 / --
--
169.DT
Design of assembly workplace automation in the Schaeffler Skalica company
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
170.DT
Design of an automated robotic workstation as part of a comprehensive line for a plastic injection press in the company Revol TT Consulting s.r.o. Trnava
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic1 / -- Károlyiová, R.
171.
BT
Design of automated manufacturing device in the Siemens NX
Department of Production Devices and Systems (UVTE MTF)
B-VZSMTF
Details of topic
1 / 1
172.
DTDesign and manufacture of laser equipment usable in smartphone repairsMorovič, L.
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic1 / -- Kadlec, J.
173.DTDesign and development of the application for control and diagnostics of mechatronic systemsBožek, P.Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 2
--
174.
DT
Proposal of Business Intelligence reports for Dell's Customer care department
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1
175.BT
Design of a cleaning device for a robotic workplace
Václav, Š.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1 Černák, M.
176.BT
Design of tool holder for a drag finishing machine prototype
Pätoprstý, B.
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
0 / 1
--
177.BT
Návrh edukačnej pomôcky vo virtuálnej realite pre podporu výučby v oblasti automatizácie.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
178.
BT
Proposal for the implementation of Industry 4.0 elements in the dual education system in the company
Homokyová, M.Institute of Industrial Engineering and Management (MTF)
B-PPP
MTFDetails of topic0 / 1
--
179.
DT
Proposal of information system for employees position tracking
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / --
Uhlík, M.
180.
DT
Proposal of information system for administrative activitiesInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
181.
DT
Proposal of information system for logistics and warehousing
Kebísek, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / --
182.
DT
Design of an information system for monitoring tasks and projects in the company
Važan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Jirkovský, M.
183.
DT
IS
Juhásová, B.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / -- Jánošík, M.
184.
BT
Proposal of information system for a company in agricultural production areaInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / 1
185.
DT
Innovation of dirop forging production using simulation programInstitute of Production Technologies (MTF)I-VTVM
MTF
Details of topic
1 / 1
186.
BT
Design of coreboxes for sand mould for cast ship engine block production
Šuba, R.
Institute of Production Technologies (MTF)
B-PPTMTF
Details of topic
1 / --
187.DTDesign of a one-purpose pneumatic balancer manipulator in the company Revol TT Consulting s.r.o. TrnavaHolubek, R.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / -- Belák, A.
188.
DT
Design of a single-purpose machine with a control station
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / 1
189.DTDesign of a camera system for 100 % inspection of selected parameters of ADM/IDM/Division
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / -- Pňaček, D.
190.
BT
Design of camera control during the installation of headlightsVáclav, Š.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
Nedelka, E.
191.
DT
Design of the concept orientation of the parts in the automatic pressing module in the company Schaeffler s.r.o.Holubek, R.Institute of Production Technologies (MTF)
I-VTVM
MTFDetails of topic1 / -- Dubecký, J.
192.
DT
Design of an end effector of an industrial robot
Institute of Production Technologies (MTF)
I-VZSMTF
Details of topic
1 / --
Michalec, R.
193.DTDesign of a crane construction for a production hallKusá, M.
Faculty of Materials Science and Technology in Trnava
I-VZSMTFDetails of topic
1 / --
194.
DTThe structural design and manufacturing preparation of fixature device of test samples
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / -- Horváth, P.
195.
DT
Bending tool computer aided designInstitute of Production Technologies (MTF)I-PPN
MTF
Details of topic1 / 1
196.
DT
Proposal of a marketing strategy of a selected industrial enterprise based on the systemic implications of the USZP concept (academic year 2020/2021)
Sakál, P.Institute of Industrial Engineering and Management (MTF)
I-PMA
MTF
Details of topic
1 / 1
197.BTDesign of a mechatronic device controlled by a PLC
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / 1 Lagin, O.
198.
DT
Design of a measurement plan for measuring a particular component on a coordinate measuring machine
Görög, A.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / 2--
199.
BT
Proposal of methodology for the preparation of a digital model for the process of virtual commissioning using method the software in the loop method
Institute of Production Technologies (MTF)
B-VZS
MTFDetails of topic
0 / 1
--
200.
BT
Design of a module for testing connectors in company coditions Leoni Slovakia Ltd.
Department of Machining and Computer-aided Technologies (UVTE MTF)B-PPTMTF
Details of topic
1 / 1
Bežák, M.
201.
BT
Design of assembly of CNC milling machine
Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
202.BT
Design of electronic cigarette assembly
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Pastor, L.
203.
DT
Escalator installation designVáclav, Š.
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic1 / 1 Krnáč, T.
204.
BT
Design of car engine assemblyVáclav, Š.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic1 / 1
205.
BT
Design of assembly of a wood splitting machineVáclav, Š.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1
206.
BT
Design of an assembly workplace for the assembly of mountain bikes
Institute of Production Technologies (MTF)
B-VZS
MTFDetails of topic1 / 1 Siklenka, M.
207.
BTDesign of an assembly workplace for the assembly of shock absorbers in a motorcycleVáclav, Š.Institute of Production Technologies (MTF)B-VZSMTF
Details of topic
1 / 1
Vrábel, M.
208.
BT
Design assembly jig for the tool holder HSK E50
Jurina, F.Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
1 / 1
209.
DT
Design of an assembly robotic workstation using power supply by photovoltaic technology with an output into the 500 kWpHolubek, R.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic1 / 1
210.DT
Design of tool for sheet metal forming processes
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
0 / 1
--
211.
BT
Design of sand mould for cast pin connector
Šuba, R.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
0 / ----
212.
DT
Design of a new solder alloy for joining power semiconductorsKoleňák, R.
Institute of Production Technologies (MTF)
I-ZASMMTF
Details of topic
1 / --
213.
BT
Proposal for the improvement of the knowledge management system in the conditions of industrial enterprises
Husovič, R.Institute of Industrial Engineering and Management (MTF)B-PMA
MTF
Details of topic
2 / 2
Čulík, M.
Špánik, M. L.
214.
DT
Návrh operátorského panelu pre robotické zváracie pracovisko.Némethová, A.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
215.
BT
Proposal for optimization of the process of renovation of drawing dies by machining in ŽP a.s.Morovič, L.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
Budinský, J.
216.
BT
Design of a palletizing robotized workplace in program Process Simulate
Institute of Production Technologies (MTF)
B-VZSMTFDetails of topic1 / 1
217.
DT
Design of soldering parameters by electron beam of stainless steel and Cu plate
Department of Welding and Materials Joining (UVTE MTF)
I-VTVM
MTF
Details of topic
1 / 1
218.
DT
Design of welding parameters for stainless steel and copper butt weld by laser beamHodúlová, E.
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / --
219.DT
Proposal of personnel strategy of a selected industrial enterprise based on systemic implications of the SCSR concept (academic year 2020/2021)
Sakál, P.Institute of Industrial Engineering and Management (MTF)
I-PMA
MTFDetails of topic
0 / 1
--
220.BTProposal of production process for copy of tank cast hullŠuba, R.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / --
221.
BT
Design of a workplace for arc technologies of welding and joining materials
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / --
Šatura, R.
222.BTDesign of welding jigInstitute of Production Technologies (MTF)B-VTE
MTF
Details of topic
0 / ----
223.BT
Design of fixture for rotating dynamometer
Pätoprstý, B.Department of Machining and Computer-aided Technologies (UVTE MTF)B-PPT
MTF
Details of topic
0 / 1
--
224.
DT
Receivables management proposal in a selected industrial enterprise
Institute of Industrial Engineering and Management (MTF)
I-PMAMTF
Details of topic
1 / 1
225.
DT
Proposal for rationalization of the assembly line
Václav, Š.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1 Ďuračka, D.
226.BT
Design of a reduction cone for machine center spindle
Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
Trenčík, P.
227.
DT
Proposal of the heating control process in a residential building including visualization.Halenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / 1
Barnin, J.
228.
BT
Design of a control system for setting the torque value of a car wheel bolt tightener
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / --
Miškuf, M.
229.
BT
Design of a plastic welding machine with PLCGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
Gábor, F.
230.
DT
Design of a robotic station for assembly operation in Faurecia Automotive Slovakia s.r.o.Ružarovský, R.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
Details of topic
1 / 1 Ištvanec, Š.
231.
DTNávrh SCADA systémmu pre vybranú firmuNémethová, A.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
232.
DT
Design of a sensory solution based on a microcontroller using MicroPythonInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic0 / 1--
233.DT
Design of a screwing station for the assembly a tensioner
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1
234.
DT
Design of sensing operational data and physical quantities
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
0 / 1
--
235.
BT
Proposing method for soldering materials in the production of high-performance semiconductor components
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / --
Mojžiš, M.
236.BTProposing method for soldering materials in the production of high-performance semiconductor componentsKoleňák, R.
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / ----
237.
BT
Proposing method for soldering ceramic materials
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / --
Blaško, J.
238.
BTProposing method for soldering ceramic materials
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / ----
239.
BT
Proposing method for soldering composite materials
Koleňák, R.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / -- Neuman, L.
240.BTProposing method for soldering composite materialsKoleňák, R.Institute of Production Technologies (MTF)B-VTEMTFDetails of topic0 / --
--
241.BT
Design of a synchronous car wheel bolt tightener
Naď, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZMTFDetails of topic0 / --
--
242.BT
Design of a systematic solution of a two-piece recess grinding on hole grinders
Görög, A.Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1 Mihočko, M.
243.BTProposing method of welding technology and parameters for the repairing of damaged bronze castingsKostolný, I.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / 1
--
244.BTProposing method of welding technology and parameters for the repairing of damaged brass castingsKostolný, I.Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic1 / 1
245.
DT
Design of a test model of a dynamic control system for the development of machine learning algorithms
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic0 / 1
--
246.
BT
Design of a universal jig for manual drilling of holes in selected components
Václav, Š.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
247.
DT
Design of a universal clamping device
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1
248.
BT
Clamping design for machine vice
Šimna, V.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1
249.
DT
Design of virtual plants controlled by PLC with software Factory I/O
Flochová, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic2 / 2 Botka, L.
Rehák, T.
250.DT
Proposal of the production strategy of a selected industrial enterprise based on the systemic implications of the SCSR concept (academic year 2020/2021)
Institute of Industrial Engineering and Management (MTF)I-PMA
MTF
Details of topic
0 / 1--
251.
BT
Proposal of mould design for motorboat ship screw
Šuba, R.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / --
--
252.
DT
Design of a device for investigating the influence of the volume filling structure of 3D printed parts
Institute of Production Technologies (MTF)
I-VZSMTFDetails of topic0 / --
--
253.
DT
Design of a device for granulate dosing
Institute of Production Technologies (MTF)
I-VZSMTFDetails of topic
0 / 1
--
254.BTProposal of a device for determining the tool assembly approximate lenghtŠimna, V.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
255.
DTProposal of streamlining the reverse logistics in context of sustainable developmentFidlerová, H.Institute of Industrial Engineering and Management (MTF)
I-PMA
MTF
Details of topic1 / --
256.
BT
Proposal for improving the time of the production process of plastic injection
Bílik, J.Institute of Production Technologies (MTF)
B-VTVM
MTFDetails of topic1 / 1
257.
BT
Design of a welding positioner using computer aid
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / --
258.
BT
Design of a welding jig using computer aidUrminský, J.Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / --
259.BTDesign for additive manufacturingBuranský, I.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
260.DT
NN for identification of unattended baggage
Schreiber, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
261.
BTStandardization of assembly operationsVáclav, Š.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1 Kopinec, P.
262.
BT
New 3D simulation posibilities for production and logistic processes in TecnoMatix Plant Simulation
Institute of Production Technologies (MTF)
B-VZSMTF
Details of topic
0 / --
--
263.
BT
New trends and innovations in the production of ring-shaped forgings
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
1 / 1
Kubík, T. V.
264.
DT
Numerical simulation and analysis of the influence of the pressing force on the mechanical properties of iron-based powder compacts
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
265.BT
Machining on CNC machines
Pokorný, P.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
3 / 1
266.
BT
Machinability of materials during laser micromachining
Institute of Production Technologies (MTF)B-VTEMTF
Details of topic
1 / -- Vlček, T.
267.
BT
Optical 3D scanning and part measurement in GOM Inspect software
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic
1 / 1
268.
DT
Optimization of logistics in the automotive industryVažan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / 1
269.
DT
Optimization for the assembly of railway bearingsRužarovský, R.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
Benedikovič, R.
270.DTOptimization of the CNC conventional metal spinning processInstitute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / 1
271.DTOptimisation of microstructure and properties of high-speed steel using laser beam surface treatmentČaus, A.Institute of Production Technologies (MTF)I-VTVM
MTF
Details of topic
1 / 1
272.DT
Optimalization of production process for rolled locks for radial needle rings
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / 1
273.
BT
Optimization of production processes using Plant Simulation software in Schaeffler
Matúšová, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
274.
DTOrbital welding of austenitic stainless steelInstitute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / --
275.BT
PHP Rest ful API for IOT data
Střelec, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic1 / 1 Škoda, J.
276.
BT
Neural network base PID controller for PLC S7-1200
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
1 / --
277.
BTComputer aided design of technological processesInstitute of Production Technologies (MTF)B-PPT
MTF
Details of topic
0 / --
--
278.
BT
Computer aided design and manufacturing of a complex componentPeterka, J.Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
4 / --
Ikrényi, F.
Valachovič, T.
Málik, J.
Tariška, E.
279.
DT
Computer simulation of cutting tool wearInstitute of Production Technologies (MTF)
I-PPN
MTF
Details of topic0 / ----
280.
DT
The movement of the robot along the guide line formed by the conductor with electric current
Horváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / --
Schneider, J.
281.
DT
Marking and engraving of materials using fiber laser system
Institute of Production Technologies (MTF)
I-VTVMMTF
Details of topic
1 / 1 Turis, O.
282.
DT
Porosity measurement by CT device in the 3D printed parts.
Kritikos, M.Institute of Production Technologies (MTF)I-PPNMTFDetails of topic
1 / 1
283.
DTComparision of soldering and brazing copper pipes pipelinesInstitute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / --
Ďurmek, A.
284.
DT
Comparison of aditive manufacturing module in software Fusion 360 & PowerMill
Kuruc, M.Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / 1
285.
BT
Comparison of reverse enginering in software Fusion 360 & PowerShape
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1
286.
DT
Comparison of different cutting method of construction steels in DDO s.r.o. company
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / 1--
287.
BT
Comparison of properties of test specimens made of ABS by two technologies
Bílik, J.Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
Kunkelová, G.
288.
BT
Portal for online teaching of Programmable logic controllers
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic
1 / --
Kostolanský, M.
289.
BTRisk assessment at selected workplaceSzabová, Z.Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
3 / 2
290.BT
Assessment of the model situation of the process of joining structural components from a technological and economic point of view
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
291.
BT
Assessment of the possibilities of reducing the porosity of compacts from powder mixtures using numerical simulationInstitute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / --
--
292.
BT
Assessment of risks of chosen technical devicesÚstav integrovanej bezpečnosti (MTF)B-IBE
MTF
Details of topic
1 / 1
293.
DT
Assessment of sorption materials effectiveness for the removal of petroleum substances from water
Sirotiak, M.
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1
294.BTFood waste - analysis of consumer behavior and possibilities of its preventionŠefčovičová, K.Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTFDetails of topic0 / 1--
295.
DT
Use of branched control circuitsFlochová, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
296.
BT
Fire safety of additive manufacturing materials
Buranská, E.
Department of Safety Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / 1
--
297.BTPrediction of the influence of the pressing force on the mechanical properties of iron-based powder compactsBehúlová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZMTFDetails of topic
0 / --
--
298.
DT
Direct soldering of SiC ceramic with active solder type Sn-Ag-Sb-Ti
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / -- Šimek, P.
299.
DT
Proces tvorby akceptačných testov pre vybraný produktTanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
300.
BT
Advanced manufacturing processes for surface modification of biomedical parts
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / ----
301.
DT
Project design of a workplace for the production of concrete fences in the conditions of the company J&M Slovak s.r.o
Institute of Production Technologies (MTF)
I-VZSMTF
Details of topic
1 / 1 Novosedlík, J.
302.
DT
Rationalization of component cleaning in the conditions of Schaeffler Skalica
Pokorný, P.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
303.
DT
Rationalization of specific component productionInstitute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 2 Masár, V.
304.
DT
Cutting edge preparation of the CBN cutting inserts
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic1 / 1 Benian, M.
305.
BT
Search in the field of computer algorithms and their adaptation to processes in production facilitiesInstitute of Production Technologies (MTF)
B-VZS
MTFDetails of topic0 / 1--
306.
DTRetrofit of line for the plastic bags production
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic1 / 1
307.
BTReverse engineering of automotive partMilde, J.Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / 1
308.
BT
Reverse engineering of a rotary part
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
309.DT
Reverse engineering of selected components
Milde, J.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / 1
Bugyi, J.
310.
DT
Riadenia robotického vysávača pomocou laserového scaneraNemlaha, E.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / -- Pukalovič, M.
311.
BT
Electro-pneumatic control circuit of the deviceMudriková, A.Institute of Production Technologies (MTF)B-VZSMTF
Details of topic
1 / --
312.
BT
Solution of algebraic equations up to the 4th degree, application in C # or JavaLiška, V.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
0 / 1
--
313.BTSolution of a definite integral by numerical methods, application in C # or JavaLiška, V.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 2
--
314.
DT
Rotary ultrasonic machining with high depth of cut
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
315.
DT
Analysis of the most common causes of work accidentsÚstav integrovanej bezpečnosti (MTF)
I-IBE
MTFDetails of topic1 / 1
316.
DT
Traffic signs recognition by neural networks
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / --
317.
DTVoice commands recognition for home devices controlSchreiber, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
318.BTSensory equipment of selected devicesMudriková, A.Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
1 / --
319.
DT
Sensory system based on ESP32
Gašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
0 / 3
--
320.
BT
Experimental investigation of cast aluminium alloy by destructive and non - destructive mothodsInstitute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
321.DT
Investigation the influence of parameters for pulsed and ultrasonic welding of plastics on the welded joints quality
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
Details of topic
1 / 1 Dedík, M.
322.BTTesting of mechanical properties of lap joints
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic1 / -- Baránek, D.
323.DT
Strengthening of surface layer of the components fabricated by additive technology using laser beam surface treatment
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1
324.
DT
Data processing in the SCADA system using the OEE indicator
Ďuriš, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
325.
BT
Care of cutting fluids used in the machining process
Jurina, F.
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
1 / 1
Farský, M.
326.
BT
Current treds in utilisation of wire assisted additive manufacturing
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / 1
--
327.BT
Light Pollution in Trnava
Department of Fire Protection Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
1 / 1
328.
DT
Chemical registration system for small and medium-sized enterprises
Pastierová, A.Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
0 / ----
329.
DT
Chemical substance registration system for laboratory
Ústav integrovanej bezpečnosti (MTF)I-IBE
MTF
Details of topic
1 / -- Francúz, S.
330.DTSystém na evidovanie bugov v procese testovania softvéruInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / --
331.
BT
Study of factors influencing the spectral shift of selected water contaminants
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
1 / --
332.
DTStudy of optical and mechanical stability of transparent woodDepartment of Environmental Engineering (UIBE MTF)
I-IBE
MTFDetails of topic
0 / --
--
333.
BT
The study of stainless steel to copper solderability
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / ----
334.
BT
Study of explosion parameters of dispersed dust
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic1 / 1
335.DT
Study of explosion parameters of dispersed dust
Ústav integrovanej bezpečnosti (MTF)I-IBE
MTF
Details of topic1 / 1
336.DTStudy of explosion parameters of dispersed dust depending on the igniter
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1 Bajan, J.
337.
DT
Technological solution of bimetallic structural nodes of parts of boilers for waste incineration
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic1 / 1
338.
DT
Temperature logger utilizing ESP32
Gašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 2
339.
DTThermoregulatory envelope for insulin pumpAbas, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / 1
--
340.
BT
Cration of cutter location data in Autodesk Fusion 360 software
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
341.
BTCreating e-learning support in designing cable harnessesInstitute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1 Šterdas, J.
342.
BTCreation of e-learning materials for the subject Cutting toolsInstitute of Production Technologies (MTF)B-VZSMTFDetails of topic3 / 2 Matej, L.
Lukáč, P.
Planeta, L.
343.
BT
Creating of e-study materials for subject Construction supported by PC (2D objects)Hrušková, E.Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
1 / --
344.
BT
Creation of e-study materials
Matúšová, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
345.
DT
Kinematics creation and simulation of 3D models in the program TecnoMatix Plant Simulation
Institute of Production Technologies (MTF)
I-VZSMTFDetails of topic1 / --
346.
BT
Guide creating for working position "planning production" in Schaeffler ltd.
Institute of Production Technologies (MTF)B-VTVMMTFDetails of topic
1 / --
347.
BT
Creation of a virtual model for educational purposes in the field of automation.Borkin, D. V.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 1--
348.
BTCreation of drawings in Autodesk Fusion 360 softwareInstitute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
349.
BT
Cration of the assemble in Autodesk Fusion 360 software
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1
350.
BT
A full factor experiment for two factorsInstitute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
351.
BT
Treatment and improvement of water quality in domestic conditions
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic1 / -- Scherer, A.
352.
BT
Modification of CAM program for NC code
Faculty of Materials Science and Technology in TrnavaB-PPT
MTF
Details of topic
1 / 1
Hipp, J.
353.
BT
Beehive weight cell with monitoring system
Střelec, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1 Bánó, J.
354.
BTVirtual catapultKotianová, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
0 / --
--
355.
BT
Virtual control object for Siemens PLC for online teaching
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / --
Bilčík, M.
356.
DTProperties of metal parts produced by 3D printingPokorný, P.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1 Jurkovič, J.
357.DTProperties of copper - steel lap joints welded by electron beam
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / -- Žáčik, O.
358.DTProperties of components extruded from composite materials
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / -- Ižvolt, T.
359.
BT
Hydrogen technologies from the safety and environmental point of view
Soldán, M.
Department of Environmental Engineering (UIBE MTF)
B-IBEMTFDetails of topic1 / 1 Jemalová, D.
360.
BTImpact of external heat flux on weight loss during wood burning
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic0 / --
--
361.
BT
Filtration effect on the geometrical form tolerances evaluation on CMM.
Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
362.
DTInfluence of focal position on the properties of electron beam welded copper - steel jointsInstitute of Production Technologies (MTF)I-VTVMMTFDetails of topic
1 / --
363.
DT
The influence of strengthening curves generation at numerical simulation of seamless tubes drawing
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic
0 / --
--
364.BTInfluence of cutting depth on roundness and roughness of turned surfaceGörög, A.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
365.
DT
Influence of orientation and spacing on fire risk of electric cablesMartinka, J.Ústav integrovanej bezpečnosti (MTF)I-IBEMTF
Details of topic
1 / 1 Kostický, Š.
366.
DT
The Effect of welding parameters by mobile laser equipment on selected properties of tool steelsKovaříková, I.Department of Welding and Materials Joining (UVTE MTF)I-ZASMMTFDetails of topic1 / 1 Koník, M.
367.
DT
Effect of Wire and Arc Additive Manufacturing parameters on the microstructure and mechanical properties of AW5087 aluminium alloy components
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / 1
Bakovka, J.
368.
DT
Influence of electron beam welding parameters on the properties of copper - stainless steel overlapped weld joints
Sahul, M.Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic1 / 1
369.
BT
Influence of feed on roundness and roughness of turned surface
Institute of Production Technologies (MTF)B-PPTMTFDetails of topic1 / 1 Raček, M.
370.
DT
Impact of wood surface treatment on critical heat flux
Ústav integrovanej bezpečnosti (MTF)I-IBE
MTF
Details of topic1 / -- Rakús, B.
371.
DT
Effect of mixing on the properties of laser welded copper - steel jointsInstitute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / --
372.
BT
Stylus ball diameter effect on the position tolerances evaluation measured on CMM.
Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
0 / 1--
373.
DisTThe influence of edge preparation on the tool life during the turning of difficult-to-cut materialsPeterka, J.
Institute of Production Technologies (MTF)
D-STAM
MTF
Details of topic
0 / --
--
374.
DT
Influence of reverse geometric modeling on geometric parameters of 3D CAD modeInstitute of Production Technologies (MTF)I-PPNMTF
Details of topic
1 / 1
375.
DT
Influence of plasma cutting on the cut material properties
Urminský, J.Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
0 / --
--
376.
BT
Influence of different cutting methods on dimension tolerances of complex shape partMarônek, M.Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic
1 / 1 Štetina, S.
377.
DT
Influence of grinding feed rate on the quality of the cutting tool flutes
Buranský, I.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
378.
BT
Scanning speed effect on the position tolerances evaluation measured on CMM.Kritikos, M.Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1
379.
BTInfluence of technological parameters on forming parts propertiesBílik, J.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic1 / 1
380.
BT
Impact of temperature on chosen woods colour change
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
1 / 1
381.
DT
Effect of surface treatment of Al-Li alloy on the porosity of laser beam welded jointsMarônek, M.
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / 1
Kukan, P.
382.
DT
Influence of welded surfaces treatment by plasma cutting on weldability of carbon steels
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
0 / --
--
383.
DTCutting edge radius influence in machining processŠimna, V.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / 1
--
384.
DTThe influence of cutting edge radius sizes on the surface roughtness of machined surfaceJurina, F.
Department of Machining and Computer-aided Technologies (UVTE MTF)
I-PPN
MTFDetails of topic1 / 1
385.DTThe influence of cutting edge radius sizes on tool wear of milling cuttersInstitute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / 1 Pecko, T.
386.DT
Influence of selected photopolymers on dimensional accuracy of components in the process of DLP technology
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1 Pitek, P.
387.DT
The effect of the voxel size on the aluminium parts defects evaluation by CT device.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
Detko, P.
388.DTThe effect of the voxel size on the defects evaluation by CT device.Kritikos, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic0 / 1
--
389.
DT
Evaluation of the accuracy of selected dimensions of seamless steel tubes using 3D digitization
Morovič, L.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / --
390.
BT
Calculation of critical heat flux for initiation of burning
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
0 / --
--
391.BT
Seamless tubes manufacturing
Bílik, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
392.
BT
Production of components for LCD housing
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTFDetails of topic1 / 1 Balážik, A.
393.
BT
Production of injection molding plastic partsMartinkovič, M.Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
394.
DTProduction of stabilizing wings for additional fuel tank from aircraft with the assitence of reverse engineeringMilde, J.Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic
1 / 1
395.
BTProduction of shaped plastic partInstitute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
396.
DT
Production of dies on a CNC lathe using CAM software Edgecam
Institute of Production Technologies (MTF)I-PPNMTF
Details of topic
2 / --
Habšuda, K.
Bodnár, R.
397.BT
The creation of the threats
Kuruc, M.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic1 / 1
398.
DTResearch of cold die drawing of tubes process using FEM simulationKapustová, M.
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic
1 / --
Katona, G.
399.
DT
Research of cold die drawing of tubes process using computer simulation
Institute of Production Technologies (MTF)
I-OATMTF
Details of topic
0 / 1--
400.
DTThe research of Inconel alloy welding by laser beamHodúlová, E.Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / --
401.
DT
Research of weldability of stainless steel with copper by laser beam in pulse mode
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
0 / --
--
402.
DTResearch of weldability of stainless steel with copper by laser beam in pulse modeHodúlová, E.
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / -- Fojtík, Š.
403.
BTHigh-precision methods of machining X-ray crystal optics surfaces
Institute of Production Technologies (MTF)
B-VTVMMTF
Details of topic
1 / 1 Ferkodič, Š.
404.DTaaa
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / --
Mĺkvy, D.
405.
DT
aaa
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / -- Hornáček, D.
406.
DT
Dataset for neural network for human layng behaviour identificationSchreiber, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic0 / 1
--
407.
DT
Design of new educational tools in the creation of e-learning support for teaching the subject Design of Production Systems
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 1--
408.
DT
Design a mobile application for smartphones to manage and optimizecontrol, maintenance and repair
Važan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
409.
BT
Usage of additive WAAM technology
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / --
410.
DT
Využitie Big Data analýz pri predikcii vývoja epidemiologickej situácie
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / --
Zábranský, E.
411.
DTUse of CA technology in the design and manufacture of a folding knife.Peterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
412.BT
CNC machines in carpentry
Šimna, V.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1 Tomašovič, R.
413.
BT
The use of beam technologies for joining of stainless steel to copper
Hodúlová, E.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / ----
414.BT
Use of machine learning methods in assignments checking
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic1 / 1
415.BT
Use of high-speed cameras in welding
Marônek, M.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / 1--
416.
DisTBalancing of cutting toolsFaculty of Materials Science and Technology in Trnava
D-STAM
MTF
Details of topic
0 / --
--
417.
DisT
Balancing of cutting tools
Institute of Production Technologies (MTF)
D-STAM
MTFDetails of topic0 / ----
418.DTDevelopment of a new generation modular production systemVažan, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
419.DT
Development of subroutines for application of moving heat sources during welding in the ANSYS software
Behúlová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic0 / --
--
420.
DTDevelopment of technologies of manufacturing companies of the futureVažan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
0 / 1
--
421.
BTWebový informačný systém technického zamerania
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
0 / --
--
422.
DTRescue of persons from construction excavationsSzabová, Z.
Department of Safety Engineering (UIBE MTF)
I-IBE
MTFDetails of topic
1 / 1
Hačunda, D.
423.DTBasic elements of Virtual commissioning in the program TecnoMatix Plant Simulation: Case study using a SiL strategyInstitute of Production Technologies (MTF)I-VZS
MTF
Details of topic
1 / --
Kučerová, M.
424.
BT
Introduction of plastic regranulation in automotive production
Hajdu, Š.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Záhumenský, M.
425.
DT
Implementation of UR collaborative robot into the production process
Némethová, A.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic1 / 1
426.
DT
The introduction of a new plastic product in conditions of JIT Plastic s.r.o. company
Institute of Production Technologies (MTF)
I-VTVM
MTFDetails of topic
1 / 1
427.BT
Data collection from production line based on data flow method
Střelec, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / 2
428.DT
Streamlining inter-operational logistics in production
Mudriková, A.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / -- Bolebruch, R.
429.DTStreamlining JLR 462 assembly stationsVažan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic0 / 1--
430.
BT
Recovery of silver from used PC keyboards
Štefko, T.Department of Environmental Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / ----
431.
DT
Unification of production assembly lines in order to increase productivity and reduce manual work through the robotization and automation of logistics flowsInstitute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / 1
Macánek, J.
432.
BTLaser weding of aluminium alloys
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
433.
BT
Concentrated energy source welding of combinations of materials intended for hot and cold forming
Sahul, M.Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic
0 / --
--
434.
DTWelding of stainless steel with copper
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / --
435.BT
Laser beam welding of lap joints
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / -- Miták, P.
436.
DT
Laser beam welding of stainless steel - brass lap joints
Institute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / 1
Soukup, P.
437.
BT
Pulsed and continuous laser weldingInstitute of Production Technologies (MTF)B-VTEMTFDetails of topic
1 / --
Podkonický, M.
438.
DT
Electron beam welding of trimetal
Institute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / --
Kopúnek, M.
439.
DT
Life of cutting materials
Pokorný, P.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1 Čižmárik, I.
440.
BT
3D model of device for the experimental diagnostics of mechanical failure of devices
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic1 / -- Kušnierik, M.
441.
BT
3D printing of metel parts
Pokorný, P.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic1 / 1 Mészáros, M.