Oct 26, 2020   11:53 a.m. Demeter
Academic information system

Summary of topics offered - Faculty of Materials Science and Technology in Trnava


Application shows list of current and approved topics offered under the selected department or under all its subordinate departments. You can limit the list of topics by the following criteria:

Use the following filter to restrict the displayed records.

Type of thesis:
Programme:
Topic supervisor:
Supervising department:

* | A | B | C | D | E | F | G | H | Ch | I | K | L | M | N | O | P | R | S | T | U | V | W | 3

Ord.
TypeTopicThesis supervisorSupervising department
Programme
Intended for
DetailsOccupied/Max.
Project participants
1.
BT
Wire assisted additive manufacturing of light weight alloys
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1 Kamhal, J.
2.
BT
Additive technologies used for biomedical parts productionŠugár, P.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic2 / -- Šedivá, D.
Letkovič, J.
3.
DT
Analysis and evaluation of images obtained using thermocameraInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 2
--
4.
DT
Risk analysis of additive manufacturingBuranská, E.Department of Safety Engineering (UIBE MTF)I-IBE
MTF
Details of topic
1 / 1
5.
DT
Analysis of deformations caused by heat treatment in the production of shaped partsInstitute of Production Technologies (MTF)
I-PPN
MTFDetails of topic
1 / --
6.
BT
Analysis of electroerosive machining in the conditions of the company ZF Slovakia a.s.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
7.
BT
Analysis of the implementation of hybrid processes for joining steel cold-formed carbody parts
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1 Coreni, D.
8.
BT
Analysis of the possibilities of the production innovation of reductions for the TFSI engine ignition coil wiring harness with the use of additive manufacturing
Skýpala, R.
Institute of Production Technologies (MTF)
B-VTVMMTF
Details of topic
1 / 1
9.
DTAnalysis of the failure of the production of glass plates in the company Osram, a.s.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / 1 Čulík, M.
10.
DT
Analysis of processes and productivity increasing of part assembly by MTM methodology
Hrušková, E.Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic
0 / --
--
11.
DT
Risk analysis by the handling of toxic substances in a chemical laboratory
Department of Safety Engineering (UIBE MTF)
I-IBE
MTF
Details of topic
1 / 1
Jadrná, M.
12.
BT
Analysis of the current state in the field of applications and software for welding and joining materials
Urminský, J.Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic0 / --
--
13.
BT
Analysis of the current state of welding jigs for robotized workplaces
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1 Beňo, M.
14.
DT
Analysis of the trimetals Cu-Al -AlMg fabricated by explosion welding
Marônek, M.
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
0 / 1
--
15.
DTAnalysis of the trimetals Cu-Al -AlMg fabricated by explosion weldingMarônek, M.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
0 / 1
--
16.
DTAnalysis of bottlenecks in the chosen lineVažan, P.Institute of Industrial Engineering and Management (MTF)I-PMA
MTF
Details of topic
1 / 1
Florek, T.
17.
DT
Analysis of TOO size and structure changes for large bevel angles of carbon steel produced by thermal cutting
Urminský, J.
Institute of Production Technologies (MTF)
I-ZASM
MTFDetails of topic
0 / --
--
18.
BT
Data analysis of coronavirus SARS-CoV-2 pandemic.
Budjač, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 1
--
19.
DT
Risk analysis of selected machinery according to STN EN ISO 12 100
Department of Safety Engineering (UIBE MTF)
I-IBE
MTF
Details of topic
1 / 1
20.
BT
Program to solve a system of linear equations in C
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
3 / 3
21.
BTApplication for simulation of dynamic changes of material structures; origami/kirigami principle; MuPAD (MATLAB)Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic0 / --
--
22.
BTApplication for simulation of dynamic changes of material structures; rosette-like formations; MuPAD (MATLAB)
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic
0 / --
--
23.
DT
Application for early warning of line stoppage or endangerment of end customers through the information systemVažan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1--
24.
BTSoftware for analysis of amplitude variability in time series
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic
1 / 1
25.BTApplication for editing input APDL files of the ANSYS programmeĎuriš, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
0 / --
--
26.
BT
Application for editing input APDL files for the ANSYS programme
Ďuriš, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
27.
BT
Automatická navíjačka indukčných cievokNemlaha, E.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
0 / --
--
28.
DT
Automatizácia testovacích činností vybraného modulu finančnej inštitúcieTanuška, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Vačko, M.
29.
DT
Data acquisition automation and crystallization process control
Kusý, M.
Institute of Materials (MTF)
I-AIPP
MTFDetails of topic
0 / 1
--
30.
BT
Safety of additive manufacturing in relation fine particles
Buranská, E.
Department of Safety Engineering (UIBE MTF)
B-IBEMTF
Details of topic
0 / 1
--
31.
BT
Safety aspects of industrially synthesized nanoparticles
Department of Safety Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / ----
32.
DT
Risks of chosen machines
Martinka, J.
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1
33.
DT
Diagnostics an advanced maintenance toolInstitute of Production Technologies (MTF)I-VZSMTFDetails of topic
1 / 1
34.BT
Remote-controlled model of the two-wheeled Segway vehicle
Ďuriš, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTFDetails of topic1 / -- Martinka, I.
35.DTDigital twins of production lineInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Pulišová, S.
36.
DT
Embedded applications with RTOS support onSTM32, EPS8266, ESP32 MCUInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1 Schmidt, E.
37.DTEnvironmental suitable tratment of coffee wasteÚstav integrovanej bezpečnosti (MTF)I-IBEMTFDetails of topic
1 / 1
38.BT
Ergonomics difficulty in assembly line
Institute of Production Technologies (MTF)B-VZSMTFDetails of topic0 / ----
39.
DT
Erodological survey of the Bubeník (Trstená)
Ústav integrovanej bezpečnosti (MTF)
I-IBEMTF
Details of topic
1 / 1
40.
DT
Evaluacia autenticity spravodajskych clankov na baze machine learningu
Špendla, L.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / 1
Šrámek, M.
41.
BT
Generative design of engineering components
Buranský, I.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
42.
DTHarmonic analysis of the roundness profileGörög, A.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
Schuster, M.
43.DT
Harmonic analysis of the surface roughness profile
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic
0 / 1
--
44.
DT
Voice commands for devices control implemented in a microcontroller.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1 Rónai, J.
45.
BTEvaluation of mineral and table watersÚstav integrovanej bezpečnosti (MTF)B-IBE
MTF
Details of topic1 / 1 Podešva, R.
46.DTEvaluation of the use of personal protective equipment (PPE) in a laboratory
Department of Safety Engineering (UIBE MTF)
I-IBE
MTF
Details of topic0 / ----
47.
BTLife cycle evaluation of electrodes for resistance butt weldingBárta, J.Institute of Production Technologies (MTF)B-VTEMTF
Details of topic
1 / --
Šantavý, G.
48.DT
HW modeule for mechanical vibration analysis
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / 1 Prvý, M.
49.
DTHW module for noise vibrationĎuďák, J.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Ravas, M.
50.BTHybrid Manufacturing SystemsMorovič, L.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
51.
BT
Hydrometallurgical extraction of silver from used x-rays
Wachter, I.
Department of Environmental Engineering (UIBE MTF)
B-IBEMTF
Details of topic
0 / --
--
52.
DT
Identification of hazards related to rail defects on ŽSR train tracks.
Szabová, Z.
Department of Safety Engineering (UIBE MTF)
I-IBEMTFDetails of topic
1 / 1
Botka, M.
53.
DT
Identification of objects with variable period in astronomical observations using neural networks
Dobrotka, A.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1
54.
DT
Conceptual design of laser device innovation for the production of metal parts by the method of additive production
Ružarovský, R.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
Details of topic1 / 1 Richnák, M.
55.
BT
Implementation of a CNC grooving head on multiple spindle lathesKusá, M.Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1
Švec, T.
56.
BT
Implementation of e-learning into classical teaching for the subject Production Technology
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 3
--
57.DT
Implementation of object camera recognition capabilities into a trainning robotic station using an IRB 120 robot
Velíšek, K.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 1
--
58.
BTImplementation of measuring system for 3 axis CNC milling machine controlled by arduino moduleŠimon, Š.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / 1
59.
DT
aaa
Tanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Karelová, N.
60.DT
Implementácia strojového videnia v riadení robotizovaného pracoviska
Juhás, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / -- Krajčovič, F.
61.BT
Information system for fitness center
Střelec, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic1 / 1 Pašková, V.
62.
BT
Information system for hair salon
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
63.
DT
Information system for moving company
Križanová, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1--
64.
DT
Initiation parameters of spruce woodÚstav integrovanej bezpečnosti (MTF)I-IBE
MTF
Details of topic
1 / --
65.BT
Incremental processes in metal forming
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
66.
BT
Information system for shop with moddeling accessories
Střelec, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic1 / 1 Frišo, P.
67.
BT
Inormation system for public screening of moviesStřelec, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic
1 / 1
68.
BT
Innovative methods and practices electro-pneumatic controlInstitute of Production Technologies (MTF)B-VZSMTF
Details of topic
0 / 1
--
69.
BT
Creation of e-study materials
Institute of Production Technologies (MTF)
B-VZS
MTFDetails of topic
1 / 1
Straka, P.
70.BTInovative methods and processes of pneumatics controllingHrušková, E.Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
0 / --
--
71.
DT
Integrating data sources for the purpose of
Zahradníková, B.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Chren, J.
72.BT
IS
Juhásová, B.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / -- Barbas, M.
73.
DT
Calibration of tactile sensors with a view to increasing the life of the sensor
Božek, P.Institute of Production Technologies (MTF)I-VZSMTFDetails of topic
1 / 1
74.
DT
Sorting Trolley
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / -- Dudás, G.
75.DTComplex measurement of selected components using an optical 3D scannerMilde, J.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
0 / 1--
76.
BT
Design and creation of 3D models tool for profile bending
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
77.
BT
Forming tool design on bendingInstitute of Production Technologies (MTF)B-PPT
MTF
Details of topic1 / 1 Kačmár, B.
78.
DT
Proposal of design and production process operations for plastic cover of CMR-I
Bílik, J.Institute of Production Technologies (MTF)I-PPNMTFDetails of topic
1 / 1
Mendel, I.
79.
DT
Design and development of diagnostic equipment jigs for automated calibration controlled by a computer
Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic1 / 2
80.
BT
Design of a tool for the operation of assembling a plastic ring in a clutch bearing
Kusá, M.
Institute of Production Technologies (MTF)
B-VZSMTF
Details of topic
1 / 1 Kuba, M.
81.
BTDesign of sheet metal forming toolŠugárová, J.
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / 1--
82.
BT
Engineering design of the fixture for specific system
Kusá, M.Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
0 / 2
--
83.BT
Design of the jig expanding the possibilities of the machine in the production of threads
Institute of Production Technologies (MTF)
B-VZS
MTFDetails of topic
1 / 1
84.
BTDesign of the shaft bearing in the lid of the containerKusá, M.Institute of Production Technologies (MTF)B-VZSMTF
Details of topic
1 / --
85.
DTGeometry inspection of cutting tools by optical 3D scannerBuranský, I.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
2 / 1
86.
DTLaser modified surfaces of dental implants
Institute of Production Technologies (MTF)
I-OAT
MTFDetails of topic1 / -- Antala, R.
87.
DT
Laser engraving and cutting machineŠugár, P.Institute of Production Technologies (MTF)I-VTVMMTF
Details of topic
1 / -- Červenec, M.
88.
BTLaser polishingŠugár, P.
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
0 / --
--
89.DTLaser polishing of biocompatible material surfaces
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / -- Gendiar, I.
90.DTLaser micromachining of Ti-C composite materialInstitute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / --
91.
DT
Laser modified surfaces of forming tools
Institute of Production Technologies (MTF)
I-OAT
MTFDetails of topic
1 / 1
92.
BT
Macros in Powermill software
Šimna, V.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic0 / 1
--
93.
BTManual for working with the collaborative robot DOBOT Magician
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
94.
DT
Mechanical properties of "transparent wood"
Wachter, I.
Department of Environmental Engineering (UIBE MTF)
I-IBE
MTF
Details of topic
0 / ----
95.
BT
Meranie kvality vody v záhradnom jazierku
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / --
96.
BT
Measurement of effective surface of monolithic millInstitute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
0 / 1
--
97.
BT
Methods of measurement of microgeometry of machining tools
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / 1
--
98.
BT
A component sorting workplace model based on the Arduino programmable module
Ďuriš, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / --
Danek, T.
99.
BT
A component sorting workplace model based on the Arduino programmable module
Ďuriš, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
0 / 1
--
100.
BT
The model of self-stabilizing platformĎuriš, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ
MTF
Details of topic
1 / --
101.DT
Modeling and simulation of machined surface roughness
Peterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / 2
102.
DisT
Modeling and simulation of selected processes and characteristics of the cutting processDepartment of Machining and Computer-aided Technologies (UVTE MTF)
D-STAM
MTFDetails of topic0 / ----
103.
DisT
Modeling and simulation of selected characteristics of the cutting processPeterka, J.Institute of Production Technologies (MTF)
D-STAM
MTF
Details of topic
0 / 5
--
104.
BT
Modeling of roughness profile of turned surfaceInstitute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / 1
--
105.
BT
Modeling of sheet components in software Fusion 360 & InventorKuruc, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1
106.
DT
Modeling tool life in cutting process
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
107.
BT
The modelling of forming technological process - cuttingInstitute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / --
Praskač, M.
108.
BT
The modelling of forming technological process - open die forgingInstitute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / --
--
109.BTThe modernization of forging line with forging press LZK 4000 in conditions of HKS Forge, s.r.o.Kapustová, M.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
110.
BT
Modernization of the network infrastructure of a medium-sized enterprise
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
0 / 1
--
111.
DTMonitoring the parameters of industrial equipment using OPC-UAHalenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
112.BT
Possibilities of joining copper to steel
Kovačócy, P.
Institute of Production Technologies (MTF)
B-VTEMTF
Details of topic
1 / -- Rences, A.
113.BTPossibilities of modification active parts of metal forming toolsŠugárová, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic0 / 1--
114.
BTPossibilities of using the Siemens NX Mechatronics Concept Designer for the design of automated manufacturing deviceRužarovský, R.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTFDetails of topic
1 / 1
Konuš, M.
115.
DTPossibilitie of blockchain technologySchreiber, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / 1 Kotasz, Á.
116.
DTMožnosti využitia virtuálnej reality pre podporu výučby v oblasti automatizácie.Némethová, A.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 2
--
117.
BT
Ways of securing communication networksHalenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic
1 / 1
118.
BT
Design and implementation API for sensoric systemĎuďák, J.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
119.BT
Design and implementation IoT module
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
120.
BTDesign and implementation IP/serial converterInstitute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
121.BTNávrh a implementácia systému údržby pre firmu VUNAR Product a.s.Tanuška, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic1 / --
122.
BT
Design and preparation of production models for precision casting
Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1
123.
BT
Design and implementation of an electronic tool for calculating the parameters of cutting layers for the selected machining technology.Moravčíková, J.Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1 Veverka, J.
124.BT
IS
Juhásová, B.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / -- Krištek, A.
125.
DT
Návrh a realizácia portálu pre podporu výučby predmetu Programovateľné logické automatyNémeth, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
126.DTNávrh a realizácia riadiaceho programu a vizualizácie pre dopravníkový pásNémethová, A.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Krchnák, M.
127.
BT
Design and realization of control program and visualization for choosen part of line MPS500 with data collection
Bartoň, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic1 / 1 Horváth, A.
128.
BT
Navrh a realizácia riadiaceho systému pre otočné montážne lôžko
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / --
129.BT
Design and implementation of control circuits for stepper / DC motors for the Linux CNC platform
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
130.
DT
Návrh a realizácia SCADA systému pre vybraný procesNémeth, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / 1
131.
DT
Design and implementation of a system for collecting, processing and visualizing the results of automated software tests
Halenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / 1
--
132.
BT
Design and implementation of a system for a company providing cleaning services
Iringová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / -- Polakovič, S.
133.
BTDesign and implementation of a system for renting tools and equipmentInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
1 / --
134.DT
Návrh a realizácia virtuálneho modelu vybraného pracoviska výrobnej linky MPS500
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 5--
135.BTDesign and simulation of a robotic workplace using by ABB RobotStudioInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZMTF
Details of topic
1 / 1
136.
BT
Design and simulation of component production in the Catia program
Pokorný, P.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
137.
BT
Design and creation of the case studies in the augmented reality environment with a focus on the engineering industry
Holubek, R.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / ----
138.
BTDesign and manufacture of special 3D printer
Institute of Production Technologies (MTF)
B-PPTMTF
Details of topic
1 / 1
Holický, M.
139.DT
Design and manufacture of positioning fixature of optical imaging device
Moravčíková, J.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / 1
Rojko, M.
140.
DTDesign and manufacturing of cutting tool for finishing operation
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1
141.
DT
Design and production of a component in the conditions of EKOM spol. Ltd.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / --
142.
BT
Design and manufacturing of chess pieces using additive technology
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
143.
BTDesign and production of a selected part using CAD software and Rapid Prototyping technologyMilde, J.
Institute of Production Technologies (MTF)
B-VTVM
MTFDetails of topic
0 / 1
--
144.BT
Design and production of an educational model of the mechanism for the subject fixtures
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic0 / 2
--
145.BTDesign and manufacturing of samples for precision casting
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
146.
DT
Design and development of universal gripper for handling plastic productsInstitute of Production Technologies (MTF)
I-VZS
MTF
Details of topic0 / 1--
147.
DTNávrh a implementácia detekcie pravdivosti informácii z textuŠpendla, L.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
0 / 1
--
148.
DT
ISInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / --
Gajdoš, M.
149.DT
Design and implementation of a software sensor for ion-beam optics control of the 500 kV ion implanter at MTF STU
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic
1 / --
150.DT
Design and comparison of measurement methods of selected component parameters
Moravčíková, J.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
151.
BT
Actuator design based on SMART materials
Rolník, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ
MTF
Details of topic1 / 1 Pukanec, M.
152.
DT
Design of algorithms and neural networks for predictive control of nonlinear mechatronic systems
Michaľčonok, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / --
--
153.BTDesign of the automatic parking algorithm based on the Arduin system
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZMTF
Details of topic
1 / 1 Polakovič, O.
154.BTDesign and implementation of an electronic tool for calculating the parameters of cutting layers for the selected machining technology.Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic0 / 1--
155.
BT
IS
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 2
--
156.
BT
Návrh a realizácia informačného systému pre evidovanie COVID19 testov
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
157.
DT
Design and implementation of information system for the department of traumatology of Trnava hospitalKrižanová, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / 1
Krasňan, P.
158.BTNávrh a realizácia IS pre autobazárNemlaha, E.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
159.BT
Návrh a realizácia programu na riadenie a vizualizáciu vetrania garáže
Špendla, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1 Lenčéš, I.
160.
DT
Design and implementation of a system for a company providing reconstruction workIringová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
161.
DT
Proposal and implementation of a system for robotic testing of web applications.
Halenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / 1
162.
DT
Návrh a realizácia zariadenia na meranie elektrických parametrov výkonových modulovNemlaha, E.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / --
--
163.
DT
Design and simulation of a robotic workplace in Tecnomatix Process Simulate
Ružarovský, R.Department of Production Devices and Systems (UVTE MTF)I-VZSMTF
Details of topic
2 / 2 Šumichrast, D.
Prosňanský, M.
164.
DT
Design of parts automatic loading into workplace of Bimeric machine in Schaeffler ltd.
Institute of Production Technologies (MTF)
I-VZSMTFDetails of topic
0 / --
--
165.
DTDesign of assembly workplace automation in the Schaeffler Skalica companyInstitute of Production Technologies (MTF)I-PPNMTF
Details of topic
1 / 1 Spevák, R.
166.
DT
Design of an automated robotic workstation as part of a comprehensive line for a plastic injection press in the company Revol TT Consulting s.r.o. TrnavaHolubek, R.Institute of Production Technologies (MTF)I-VZSMTFDetails of topic1 / -- Károlyiová, R.
167.BTDesign of automated manufacturing device in the Siemens NXRužarovský, R.
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTFDetails of topic
1 / 1
168.DT
Design and development of the application for control and diagnostics of mechatronic systems
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic0 / 2
--
169.DTProposal of Business Intelligence reports for Dell's Customer care department
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / 1
170.
BTDesign of a cleaning device for a robotic workplaceVáclav, Š.
Institute of Production Technologies (MTF)
B-VZSMTFDetails of topic1 / 1
171.
BT
Design of tool holder for a drag finishing machine prototype
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
0 / 1
--
172.BTNávrh edukačnej pomôcky vo virtuálnej realite pre podporu výučby v oblasti automatizácie.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
0 / --
--
173.
DTProposal of information system for employees position trackingKebísek, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / --
Uhlík, M.
174.
DT
Proposal of information system for administrative activities
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
175.
DT
Proposal of information system for logistics and warehousing
Kebísek, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / -- Zemko, A.
176.DT
Design of an information system for monitoring tasks and projects in the company
Važan, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1
177.
BT
Proposal of information system for a company in agricultural production areaInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
1 / 1
Chrenko, P.
178.
DT
Innovation of dirop forging production using simulation program
Institute of Production Technologies (MTF)
I-VTVMMTFDetails of topic
1 / 1
179.
BT
Design of coreboxes for sand mould for cast ship engine block production
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / --
180.DTDesign of a one-purpose pneumatic balancer manipulator in the company Revol TT Consulting s.r.o. TrnavaHolubek, R.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / --
181.
DT
Design of a single-purpose machine with a control station
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / 1
182.BTDesign of camera control during the installation of headlightsVáclav, Š.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic1 / 1 Nedelka, E.
183.
DTDesign of the concept orientation of the parts in the automatic pressing module in the company Schaeffler s.r.o.Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / --
Dubecký, J.
184.
DTDesign of an end effector of an industrial robotMudriková, A.Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic1 / --
185.
DTDesign of a crane construction for a production hallKusá, M.
Faculty of Materials Science and Technology in Trnava
I-VZSMTFDetails of topic1 / -- Marček, M.
186.
DT
The structural design and manufacturing preparation of fixature device of test samplesMoravčíková, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / -- Horváth, P.
187.
DT
Bending tool computer aided design
Bílik, J.Institute of Production Technologies (MTF)I-PPNMTFDetails of topic1 / 1 Nemečkaj, Ľ.
188.
DT
Proposal of a marketing strategy of a selected industrial enterprise based on the systemic implications of the USZP concept (academic year 2020/2021)
Institute of Industrial Engineering and Management (MTF)
I-PMAMTF
Details of topic
1 / 1
189.BT
Design of a mechatronic device controlled by a PLC
Ružarovský, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / 1
190.
DT
Design of a measurement plan for measuring a particular component on a coordinate measuring machineGörög, A.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / 2
--
191.
BT
Proposal of methodology for the preparation of a digital model for the process of virtual commissioning using method the software in the loop methodInstitute of Production Technologies (MTF)B-VZSMTF
Details of topic
0 / 1--
192.BTDesign of a module for testing connectors in company coditions Leoni Slovakia Ltd.Kleinedlerová, I.Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
1 / 1 Bežák, M.
193.
BT
Design of assembly of CNC milling machine
Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1
194.
BT
Design of electronic cigarette assembly
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
195.DT
Escalator installation design
Václav, Š.Institute of Production Technologies (MTF)I-PPNMTFDetails of topic1 / 1
196.
BTDesign of car engine assembly
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
Robota, Š.
197.BT
Design of assembly of a wood splitting machine
Václav, Š.Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / 1
198.BTDesign of an assembly workplace for the assembly of mountain bikesInstitute of Production Technologies (MTF)B-VZS
MTF
Details of topic
1 / 1
199.
BT
Design of an assembly workplace for the assembly of shock absorbers in a motorcycle
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1 Vrábel, M.
200.BT
Design assembly jig for the tool holder HSK E50
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
0 / 1
--
201.
DTDesign of an assembly robotic workstation using power supply by photovoltaic technology with an output into the 500 kWpInstitute of Production Technologies (MTF)I-VZSMTFDetails of topic
1 / 1
202.
DTDesign of tool for sheet metal forming processesŠugárová, J.
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
0 / 1
--
203.
BT
Design of sand mould for cast pin connector
Šuba, R.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic0 / --
--
204.
DTDesign of a new solder alloy for joining power semiconductorsInstitute of Production Technologies (MTF)I-ZASM
MTF
Details of topic1 / -- Sýkora, P.
205.
BTProposal for the improvement of the knowledge management system in the conditions of industrial enterprisesHusovič, R.Institute of Industrial Engineering and Management (MTF)B-PMAMTF
Details of topic
2 / 2
Čulík, M.
Špánik, M. L.
206.
BT
Proposal for optimization of the process of renovation of drawing dies by machining in ŽP a.s.Morovič, L.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
Budinský, J.
207.
BTDesign of a palletizing robotized workplace in program Process SimulateBočák, R.Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic1 / 1
208.
DT
Design of soldering parameters by electron beam of stainless steel and Cu plate
Department of Welding and Materials Joining (UVTE MTF)
I-VTVM
MTF
Details of topic1 / 1 Dérik, J.
209.
DT
Design of welding parameters for stainless steel and copper butt weld by laser beam
Hodúlová, E.Institute of Production Technologies (MTF)I-ZASM
MTF
Details of topic1 / -- Horváth, K.
210.DTProposal of personnel strategy of a selected industrial enterprise based on systemic implications of the SCSR concept (academic year 2020/2021)
Institute of Industrial Engineering and Management (MTF)
I-PMAMTFDetails of topic0 / 1
--
211.
BT
Proposal of production process for copy of tank cast hull
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic
1 / --
212.BTDesign of a workplace for arc technologies of welding and joining materials
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
213.
BT
Design of welding jig
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / --
--
214.
BT
Design of fixture for rotating dynamometer
Pätoprstý, B.Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
0 / 1
--
215.
DTReceivables management proposal in a selected industrial enterpriseHomokyová, M.Institute of Industrial Engineering and Management (MTF)I-PMAMTFDetails of topic0 / 1--
216.DT
Proposal for rationalization of the assembly line
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1
217.BTDesign of a reduction cone for machine center spindleVozár, M.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic
1 / 1
Trenčík, P.
218.
BT
Design of a control system for setting the torque value of a car wheel bolt tightener
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTFDetails of topic1 / --
219.BTDesign of a plastic welding machine with PLCGašpar, G.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
220.DTDesign of a robotic station for assembly operation in Faurecia Automotive Slovakia s.r.o.Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTFDetails of topic1 / 1 Ištvanec, Š.
221.
DTNávrh SCADA systémmu pre vybranú firmuNémethová, A.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic0 / ----
222.
DT
Design of a sensory solution based on a microcontroller using MicroPythonGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
223.
DT
Design of a screwing station for the assembly a tensioner
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
224.
DTDesign of sensing operational data and physical quantitiesVažan, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic0 / 1
--
225.
BTProposing method for soldering materials in the production of high-performance semiconductor components
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / --
226.
BT
Proposing method for soldering materials in the production of high-performance semiconductor components
Koleňák, R.Institute of Production Technologies (MTF)B-VTEMTF
Details of topic
0 / --
--
227.
BT
Proposing method for soldering ceramic materials
Institute of Production Technologies (MTF)
B-VTVMMTFDetails of topic1 / -- Blaško, J.
228.
BT
Proposing method for soldering ceramic materialsInstitute of Production Technologies (MTF)B-VTEMTF
Details of topic
0 / --
--
229.BT
Proposing method for soldering composite materials
Koleňák, R.Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / --
Neuman, L.
230.BT
Proposing method for soldering composite materials
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / --
--
231.
BT
Design of a synchronous car wheel bolt tightener
Naď, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZMTF
Details of topic
0 / --
--
232.
BTDesign of a systematic solution of a two-piece recess grinding on hole grinders
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
Mihočko, M.
233.BTProposing method of welding technology and parameters for the repairing of damaged bronze castingsInstitute of Production Technologies (MTF)B-VTEMTFDetails of topic
0 / 1
--
234.
BT
Proposing method of welding technology and parameters for the repairing of damaged brass castings
Kostolný, I.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
235.
DT
Design of a test model of a dynamic control system for the development of machine learning algorithmsMichaľčonok, G.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
236.BTDesign of a universal jig for manual drilling of holes in selected componentsVáclav, Š.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
237.
DT
Design of a universal clamping device
Šimna, V.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
238.
BTClamping design for machine viceŠimna, V.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1 Klofáč, K.
239.
DTDesign of virtual plants controlled by PLC with software Factory I/OInstitute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic2 / 2
240.
DT
Proposal of the production strategy of a selected industrial enterprise based on the systemic implications of the SCSR concept (academic year 2020/2021)
Sakál, P.
Institute of Industrial Engineering and Management (MTF)
I-PMA
MTF
Details of topic
0 / 1
--
241.
BT
Proposal of mould design for motorboat ship screw
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic0 / --
--
242.
DT
Design of a device for investigating the influence of the volume filling structure of 3D printed partsKošťál, P.
Institute of Production Technologies (MTF)
I-VZS
MTFDetails of topic
0 / --
--
243.
DT
Design of a device for granulate dosingInstitute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 1
--
244.BTProposal of a device for determining the tool assembly approximate lenght
Institute of Production Technologies (MTF)
B-PPTMTF
Details of topic
1 / 1
Cverenkár, M.
245.
DT
Proposal of streamlining the reverse logistics in context of sustainable development
Fidlerová, H.
Institute of Industrial Engineering and Management (MTF)
I-PMA
MTFDetails of topic
1 / --
Čerešňa, L.
246.
BT
Proposal for improving the time of the production process of plastic injection
Bílik, J.Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
247.
BTDesign of a welding positioner using computer aidUrminský, J.
Institute of Production Technologies (MTF)
B-PPTMTF
Details of topic
1 / --
248.BT
Design of a welding jig using computer aid
Urminský, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / -- Glasa, N.
249.
BT
Design for additive manufacturingInstitute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
250.DT
NN for identification of unattended baggage
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
251.
BT
Standardization of assembly operations
Václav, Š.Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1
252.
BT
New 3D simulation posibilities for production and logistic processes in TecnoMatix Plant Simulation
Institute of Production Technologies (MTF)
B-VZSMTF
Details of topic
0 / --
--
253.
BTNew trends and innovations in the production of ring-shaped forgingsKapustová, M.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic1 / 1
254.
DT
Numerical simulation and analysis of the influence of the pressing force on the mechanical properties of iron-based powder compactsBehúlová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / ----
255.
BT
Machining on CNC machines
Pokorný, P.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
3 / 1
Toman, M.
Molnár, V.
Kapustinec, T.
256.
BT
Machinability of materials during laser micromachining
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / --
Vlček, T.
257.
BT
Optical 3D scanning and part measurement in GOM Inspect software
Milde, J.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic
1 / 1
Kohút, M.
258.
DT
Optimization of logistics in the automotive industryVažan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Malíšek, G.
259.DT
Optimization for the assembly of railway bearings
Ružarovský, R.Institute of Production Technologies (MTF)I-PPNMTF
Details of topic
1 / 1
260.
DT
Optimization of the CNC conventional metal spinning process
Institute of Production Technologies (MTF)
I-OAT
MTFDetails of topic
1 / 1
Balogh, I.
261.
DT
Optimisation of microstructure and properties of high-speed steel using laser beam surface treatment
Čaus, A.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1
Holkovičová, S.
262.DTOptimalization of production process for rolled locks for radial needle ringsInstitute of Production Technologies (MTF)I-OATMTF
Details of topic
1 / 1 Vacula, L.
263.
BT
Optimization of production processes using Plant Simulation software in Schaeffler
Institute of Production Technologies (MTF)
B-VZSMTFDetails of topic
0 / 1
--
264.BT
PHP Rest ful API for IOT data
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
Škoda, J.
265.BT
Neural network base PID controller for PLC S7-1200
Kopček, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / --
266.
BT
Computer aided design of technological processes
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / --
--
267.
BT
Computer aided design and manufacturing of a complex component
Peterka, J.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic4 / --
268.DT
Computer simulation of cutting tool wear
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
269.
DT
The movement of the robot along the guide line formed by the conductor with electric current
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
270.
DT
Marking and engraving of materials using fiber laser systemKovaříková, I.
Institute of Production Technologies (MTF)
I-VTVMMTFDetails of topic0 / 1--
271.DT
Porosity measurement by CT device in the 3D printed parts.
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / 1 Socha, M.
272.DT
Comparision of soldering and brazing copper pipes pipelines
Koleňák, R.
Institute of Production Technologies (MTF)
I-ZASMMTFDetails of topic1 / -- Ďurmek, A.
273.
DT
Comparison of aditive manufacturing module in software Fusion 360 & PowerMill
Kuruc, M.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1
274.
BT
Comparison of reverse enginering in software Fusion 360 & PowerShape
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1 Štefek, G.
275.
DT
Comparison of different cutting method of construction steels in DDO s.r.o. companyKuruc, M.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic0 / 1--
276.
BT
Comparison of properties of test specimens made of ABS by two technologies
Institute of Production Technologies (MTF)B-VTVMMTF
Details of topic
1 / 1 Kunkelová, G.
277.
BT
Portal for online teaching of Programmable logic controllers
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic1 / --
278.
BT
Risk assessment at selected workplace
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
3 / 2
279.
BT
Assessment of the model situation of the process of joining structural components from a technological and economic point of view
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
Bobček, L.
280.
BT
Assessment of the possibilities of reducing the porosity of compacts from powder mixtures using numerical simulation
Behúlová, M.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic0 / --
--
281.BTAssessment of risks of chosen technical devicesMartinka, J.Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
1 / 1
282.
DT
Assessment of sorption materials effectiveness for the removal of petroleum substances from water
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1
283.
BT
Food waste - analysis of consumer behavior and possibilities of its prevention
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic0 / 1--
284.
DT
Use of branched control circuits
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / --
285.BT
Fire safety of additive manufacturing materials
Department of Safety Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / 1--
286.BTPrediction of the influence of the pressing force on the mechanical properties of iron-based powder compactsBehúlová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZMTFDetails of topic
0 / --
--
287.
DT
Direct soldering of SiC ceramic with active solder type Sn-Ag-Sb-Ti
Koleňák, R.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / --
Šimek, P.
288.
DT
Proces tvorby akceptačných testov pre vybraný produkt
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
289.
BT
Advanced manufacturing processes for surface modification of biomedical parts
Šugár, P.
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
0 / --
--
290.
DT
Project design of a workplace for the production of concrete fences in the conditions of the company J&M Slovak s.r.oMudriková, A.
Institute of Production Technologies (MTF)
I-VZSMTF
Details of topic
1 / 1
291.
DT
Rationalization of component cleaning in the conditions of Schaeffler Skalica
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
292.
DTRationalization of specific component production
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 2
293.DT
Cutting edge preparation of the CBN cutting inserts
Institute of Production Technologies (MTF)I-OAT
MTF
Details of topic
1 / 1
Benian, M.
294.
BT
Search in the field of computer algorithms and their adaptation to processes in production facilities
Zelník, R.Institute of Production Technologies (MTF)B-VZSMTF
Details of topic
0 / 1--
295.
DTRetrofit of line for the plastic bags productionGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1 Herák, M.
296.
BT
Reverse engineering of automotive part
Milde, J.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1 Benko, M.
297.
BT
Reverse engineering of a rotary part
Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1 Divéky, M.
298.
DT
Reverse engineering of selected components
Milde, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1 Bugyi, J.
299.DT
Riadenia robotického vysávača pomocou laserového scanera
Nemlaha, E.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / -- Pukalovič, M.
300.BTElectro-pneumatic control circuit of the device
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / --
Okienka, L.
301.
BT
Solution of algebraic equations up to the 4th degree, application in C # or JavaInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic0 / 1
--
302.BTSolution of a definite integral by numerical methods, application in C # or JavaInstitute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic0 / 2--
303.DTRotary ultrasonic machining with high depth of cutInstitute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
Šiška, D.
304.
DT
Analysis of the most common causes of work accidents
Ústav integrovanej bezpečnosti (MTF)I-IBEMTF
Details of topic
1 / 1
305.
DT
Traffic signs recognition by neural networksSchreiber, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Stanek, R.
306.DTVoice commands recognition for home devices controlSchreiber, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic
1 / 1
Kľúčik, R.
307.BTSensory equipment of selected devices
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / --
308.DTSensory system based on ESP32Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
0 / 3
--
309.
BT
Experimental investigation of cast aluminium alloy by destructive and non - destructive mothods
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic1 / 1 Boor, S.
310.DTInvestigation the influence of parameters for pulsed and ultrasonic welding of plastics on the welded joints quality
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
Details of topic
1 / 1
311.
BTTesting of mechanical properties of lap joints
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
1 / --
Baránek, D.
312.DT
Strengthening of surface layer of the components fabricated by additive technology using laser beam surface treatment
Čaus, A.Institute of Production Technologies (MTF)I-VTVMMTF
Details of topic
1 / 1
313.
DT
Data processing in the SCADA system using the OEE indicatorInstitute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic1 / --
314.
BT
Care of cutting fluids used in the machining processJurina, F.Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic1 / 1
315.
BTCurrent treds in utilisation of wire assisted additive manufacturingBárta, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic0 / 1--
316.BTLight Pollution in TrnavaDepartment of Fire Protection Engineering (UIBE MTF)
B-IBE
MTFDetails of topic1 / 1
317.
DTChemical registration system for small and medium-sized enterprisesÚstav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
0 / ----
318.
DT
Chemical substance registration system for laboratory
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / --
319.DTSystém na evidovanie bugov v procese testovania softvéruNemlaha, E.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / --
Beluský, S.
320.BTStudy of factors influencing the spectral shift of selected water contaminantsÚstav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
1 / --
321.DT
Study of optical and mechanical stability of transparent wood
Department of Environmental Engineering (UIBE MTF)I-IBE
MTF
Details of topic
0 / --
--
322.
BT
The study of stainless steel to copper solderability
Hodúlová, E.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / ----
323.
BT
Study of explosion parameters of dispersed dust
Ústav integrovanej bezpečnosti (MTF)
B-IBEMTFDetails of topic1 / 1
324.
DT
Study of explosion parameters of dispersed dust
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTFDetails of topic
1 / 1
Ščasný, P.
325.
DT
Study of explosion parameters of dispersed dust depending on the igniter
Kuracina, R.
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1 Bajan, J.
326.DT
Technological solution of bimetallic structural nodes of parts of boilers for waste incineration
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1
Števko, M.
327.
DTTemperature logger utilizing ESP32Gašpar, G.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 2
328.DTThermoregulatory envelope for insulin pump
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
329.
BT
Cration of cutter location data in Autodesk Fusion 360 software
Kuruc, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1 Švarba, B.
330.
BT
Creating e-learning support in designing cable harnessesInstitute of Production Technologies (MTF)
B-VZS
MTF
Details of topic1 / 1 Šterdas, J.
331.
BT
Creation of e-learning materials for the subject Cutting tools
Bučányová, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
3 / 2
332.
BTCreating of e-study materials for subject Construction supported by PC (2D objects)Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / -- Horváthová, M.
333.
BT
Creation of e-study materials
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
334.
DTKinematics creation and simulation of 3D models in the program TecnoMatix Plant SimulationInstitute of Production Technologies (MTF)I-VZS
MTF
Details of topic
1 / --
335.
BT
Guide creating for working position "planning production" in Schaeffler ltd.
Hrušková, E.
Institute of Production Technologies (MTF)
B-VTVMMTF
Details of topic
1 / -- Baran, L.
336.
BTCreation of a virtual model for educational purposes in the field of automation.Borkin, D. V.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic
0 / 1
--
337.BT
Creation of drawings in Autodesk Fusion 360 software
Kuruc, M.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic1 / 1 Kekeľák, S.
338.BTCration of the assemble in Autodesk Fusion 360 softwareKuruc, M.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic1 / 1 Burza, P.
339.
BT
A full factor experiment for two factors
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
340.
BT
Treatment and improvement of water quality in domestic conditions
Ústav integrovanej bezpečnosti (MTF)B-IBE
MTF
Details of topic
1 / -- Scherer, A.
341.
BT
Modification of CAM program for NC code
Faculty of Materials Science and Technology in Trnava
B-PPT
MTF
Details of topic
1 / 1
342.
BT
Beehive weight cell with monitoring systemInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic
1 / 1
Bánó, J.
343.BT
Virtual catapult
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
344.BTVirtual control object for Siemens PLC for online teachingStrémy, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / --
345.
DT
Properties of metal parts produced by 3D printing
Pokorný, P.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / 1
346.
DT
Properties of copper - steel lap joints welded by electron beam
Kovačócy, P.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / --
347.
DT
Properties of components extruded from composite materialsInstitute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / -- Ižvolt, T.
348.
BT
Hydrogen technologies from the safety and environmental point of view
Department of Environmental Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
1 / 1
349.BT
Impact of external heat flux on weight loss during wood burning
Rantuch, P.
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
0 / --
--
350.
BTFiltration effect on the geometrical form tolerances evaluation on CMM.Kritikos, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1 Kozák, M.
351.
DT
Influence of focal position on the properties of electron beam welded copper - steel joints
Kovačócy, P.Institute of Production Technologies (MTF)I-VTVMMTFDetails of topic
1 / --
Tóth, T.
352.
DTThe influence of strengthening curves generation at numerical simulation of seamless tubes drawingSobota, R.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
353.BTInfluence of cutting depth on roundness and roughness of turned surfaceGörög, A.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
354.
DTInfluence of orientation and spacing on fire risk of electric cablesMartinka, J.Ústav integrovanej bezpečnosti (MTF)I-IBE
MTF
Details of topic
1 / 1 Kostický, Š.
355.
DT
The Effect of welding parameters by mobile laser equipment on selected properties of tool steels
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
Details of topic
1 / 1
356.
DT
Effect of Wire and Arc Additive Manufacturing parameters on the microstructure and mechanical properties of AW5087 aluminium alloy components
Institute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / 1
357.DTInfluence of electron beam welding parameters on the properties of copper - stainless steel overlapped weld jointsInstitute of Production Technologies (MTF)I-VTVM
MTF
Details of topic1 / 1
358.BT
Influence of feed on roundness and roughness of turned surface
Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic
1 / 1
359.
DT
Impact of wood surface treatment on critical heat flux
Rantuch, P.Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / --
360.
DT
Effect of mixing on the properties of laser welded copper - steel joints
Institute of Production Technologies (MTF)I-ZASMMTF
Details of topic
1 / --
361.
BT
Stylus ball diameter effect on the position tolerances evaluation measured on CMM.
Kritikos, M.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic
0 / 1
--
362.DisT
The influence of edge preparation on the tool life during the turning of difficult-to-cut materials
Institute of Production Technologies (MTF)D-STAMMTFDetails of topic
0 / --
--
363.
DT
Influence of reverse geometric modeling on geometric parameters of 3D CAD mode
Buranský, I.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
364.
DT
Influence of plasma cutting on the cut material properties
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
0 / --
--
365.BTInfluence of different cutting methods on dimension tolerances of complex shape partMarônek, M.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1 Štetina, S.
366.
DT
Influence of grinding feed rate on the quality of the cutting tool flutes
Buranský, I.
Institute of Production Technologies (MTF)
I-PPNMTF
Details of topic
1 / 1
Tomka, P.
367.
BT
Scanning speed effect on the position tolerances evaluation measured on CMM.Kritikos, M.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1 Anderko, M.
368.
BT
Influence of technological parameters on forming parts properties
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
1 / 1
Baránek, D.
369.
BTImpact of temperature on chosen woods colour change
Ústav integrovanej bezpečnosti (MTF)
B-IBEMTF
Details of topic
1 / 1
370.DT
Effect of surface treatment of Al-Li alloy on the porosity of laser beam welded joints
Institute of Production Technologies (MTF)I-ZASMMTF
Details of topic
1 / 1
371.
DTInfluence of welded surfaces treatment by plasma cutting on weldability of carbon steelsUrminský, J.
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
0 / ----
372.
DT
Cutting edge radius influence in machining processŠimna, V.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / 1--
373.
DT
The influence of cutting edge radius sizes on the surface roughtness of machined surfaceJurina, F.Department of Machining and Computer-aided Technologies (UVTE MTF)
I-PPN
MTF
Details of topic
1 / 1
Prílesan, M.
374.DTThe influence of cutting edge radius sizes on tool wear of milling cuttersVopát, T.Institute of Production Technologies (MTF)I-PPNMTF
Details of topic
1 / 1
Pecko, T.
375.DTInfluence of selected photopolymers on dimensional accuracy of components in the process of DLP technologyInstitute of Production Technologies (MTF)
I-PPN
MTFDetails of topic
1 / 1
Pitek, P.
376.DTThe effect of the voxel size on the aluminium parts defects evaluation by CT device.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / 1 Detko, P.
377.
DTThe effect of the voxel size on the defects evaluation by CT device.Kritikos, M.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
0 / 1--
378.
DT
Evaluation of the accuracy of selected dimensions of seamless steel tubes using 3D digitization
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / --
Havran, F.
379.BT
Calculation of critical heat flux for initiation of burning
Ústav integrovanej bezpečnosti (MTF)
B-IBEMTF
Details of topic
0 / ----
380.
BTSeamless tubes manufacturingInstitute of Production Technologies (MTF)B-VTEMTFDetails of topic
1 / 1
381.
BT
Production of components for LCD housingJurina, F.Department of Machining and Computer-aided Technologies (UVTE MTF)B-PPTMTF
Details of topic
1 / 1
Balážik, A.
382.
BT
Production of injection molding plastic parts
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
Stacho, P.
383.DT
Production of stabilizing wings for additional fuel tank from aircraft with the assitence of reverse engineering
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
Minárik, Š.
384.BTProduction of shaped plastic part
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Uhlík, M.
385.
DT
Production of dies on a CNC lathe using CAM software EdgecamPeterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
2 / --
Habšuda, K.
Bodnár, R.
386.
BTThe creation of the threats
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
387.
DTResearch of cold die drawing of tubes process using FEM simulationInstitute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / -- Katona, G.
388.
DT
Research of cold die drawing of tubes process using computer simulationInstitute of Production Technologies (MTF)
I-OAT
MTFDetails of topic
0 / 1
--
389.
DT
The research of Inconel alloy welding by laser beam
Hodúlová, E.
Institute of Production Technologies (MTF)
I-VTVMMTFDetails of topic
1 / --
Kollárová, J.
390.DT
Research of weldability of stainless steel with copper by laser beam in pulse mode
Hodúlová, E.
Institute of Production Technologies (MTF)
I-VTVM
MTFDetails of topic0 / ----
391.
DTResearch of weldability of stainless steel with copper by laser beam in pulse mode
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / -- Fojtík, Š.
392.BTHigh-precision methods of machining X-ray crystal optics surfacesPokorný, P.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
Ferkodič, Š.
393.
DT
aaa
Tanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / -- Mĺkvy, D.
394.
DT
aaa
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / --
395.DTDataset for neural network for human layng behaviour identificationSchreiber, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
396.
DT
Design of new educational tools in the creation of e-learning support for teaching the subject Design of Production Systems
Matúšová, M.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 1
--
397.DT
Design a mobile application for smartphones to manage and optimizecontrol, maintenance and repair
Važan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / 1
--
398.BT
Usage of additive WAAM technology
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / --
399.
DT
Využitie Big Data analýz pri predikcii vývoja epidemiologickej situácie
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
400.
BTCNC machines in carpentryŠimna, V.Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1
Tomašovič, R.
401.BTThe use of beam technologies for joining of stainless steel to copperHodúlová, E.Institute of Production Technologies (MTF)B-VTEMTFDetails of topic0 / ----
402.BTUse of machine learning methods in assignments checking
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
403.BTUse of high-speed cameras in weldingMarônek, M.Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
0 / 1
--
404.DisTBalancing of cutting toolsPeterka, J.
Faculty of Materials Science and Technology in Trnava
D-STAMMTFDetails of topic
0 / --
--
405.
DisT
Balancing of cutting tools
Peterka, J.Institute of Production Technologies (MTF)D-STAMMTF
Details of topic
0 / --
--
406.
DT
Development of a new generation modular production systemVažan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
407.
DT
Development of subroutines for application of moving heat sources during welding in the ANSYS software
Behúlová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
408.
DTDevelopment of technologies of manufacturing companies of the futureVažan, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic0 / 1--
409.
BT
Webový informačný systém technického zamerania
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic
0 / --
--
410.
DT
Rescue of persons from construction excavations
Department of Safety Engineering (UIBE MTF)
I-IBEMTF
Details of topic
1 / 1
411.DT
Basic elements of Virtual commissioning in the program TecnoMatix Plant Simulation: Case study using a SiL strategy
Institute of Production Technologies (MTF)I-VZSMTFDetails of topic
1 / --
412.BTIntroduction of plastic regranulation in automotive productionHajdu, Š.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic
1 / 1
Záhumenský, M.
413.
DT
Implementation of UR collaborative robot into the production processInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / 1
Šmitala, M.
414.DT
The introduction of a new plastic product in conditions of JIT Plastic s.r.o. company
Bílik, J.Institute of Production Technologies (MTF)I-VTVMMTFDetails of topic1 / 1 Sládková, N.
415.BT
Data collection from production line based on data flow method
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
0 / 2
--
416.
DT
Streamlining inter-operational logistics in productionMudriková, A.Institute of Production Technologies (MTF)
I-VZS
MTFDetails of topic1 / --
417.
DT
Streamlining JLR 462 assembly stations
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / 1
--
418.
DT
Increasing the efficiency of JRL assembly stationsVažan, P.Institute of Industrial Engineering and Management (MTF)I-PMA
MTF
Details of topic
0 / 1
--
419.
DT
Increasing the efficiency of JRL assembly stations
Važan, P.
Institute of Industrial Engineering and Management (MTF)
I-PMA
MTFDetails of topic
0 / 1
--
420.
BT
Recovery of silver from used PC keyboards
Department of Environmental Engineering (UIBE MTF)
B-IBE
MTFDetails of topic
0 / --
--
421.
DT
Unification of production assembly lines in order to increase productivity and reduce manual work through the robotization and automation of logistics flowsInstitute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / 1
422.
BTLaser weding of aluminium alloys
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic
1 / 1
Gaban, D.
423.
BT
Concentrated energy source welding of combinations of materials intended for hot and cold forming
Sahul, M.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / --
--
424.
DTWelding of stainless steel with copperUrminský, J.
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / --
Beťko, L.
425.
BT
Laser beam welding of lap joints
Institute of Production Technologies (MTF)
B-VTVMMTFDetails of topic
1 / --
Miták, P.
426.
DT
Laser beam welding of stainless steel - brass lap joints
Institute of Production Technologies (MTF)I-ZASMMTF
Details of topic
1 / 1
427.
BT
Pulsed and continuous laser welding
Kovačócy, P.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / --
428.
DTElectron beam welding of trimetalInstitute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / --
429.DTLife of cutting materialsPokorný, P.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1 Čižmárik, I.
430.
BT
3D model of device for the experimental diagnostics of mechanical failure of devices
Oravcová, J.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / --
431.BT3D printing of metel partsPokorný, P.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / 1
Mészáros, M.