Jul 16, 2018   1:10 a.m. Drahomír
Academic information system

Summary of topics offered - Faculty of Mechanical Engineering


Application shows list of current and approved topics offered under the selected department or under all its subordinate departments. You can limit the list of topics by the following criteria:

Type of thesis:
Study programme:
Topic supervisor:
Supervising department:

* | A | C | D | E | I | K | L | M | N | O | P | R | S | T | U | V

Ord.TypeTopicThesis supervisorSupervising departmentStudy programmeIntended forDetailsOccupied/Max.Project participants
1.DisTAdaptive vibration energy harvestingTakács, G.Institute of automation, measurement and applied informatics (FME)D-AISP, D-MECH, D-MECHTFMEDetails of topic0 / ----
2.DisTActive and passive safety of passengers in carsMagdolen, Ľ.Institute of transport technology and designing (FME)D-DSZFMEDetails of topic0 / 1--
3.DisTAnalysis of storage tanks interaction with liquid during a seismic eventMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
4.DisTAnalysis of European development projects impact on realization of SI units by primary standards in national metrology institutesTesař, J.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / 1--
5.DisTAn analysis of an impact of the European Metrology Research Programme EMRP and the European Metrology Programme for Innovations and Research EMPIR on realization of change of the base-SI-units definitions using fixations of the values of the basic physical constantsTesař, J.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / 1--
6.DisTAnalysis of the various impact factors on the accuracy of the evaluation of heating costsĎuriš, S.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / ----
7.DisTAnalysis of the various impact factors on the accuracy of the evaluation of heating costsĎuriš, S.Institute of automation, measurement and applied informatics (FME)D-MTFMEDetails of topic0 / ----
8.DTAnalýza vplyvu seizmickej udalosti na spoľahlivosť nízkotlakového systému havarijného chladenia jadrového reaktora VVER440Urban, F.Ústav energetických strojov a zariadení (FME)I-ESZFMEDetails of topic0 / 1--
9.DisTAnalysis of the impact of structural thermal effects on the dynamic instability of the disc brake componentsMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
10.DisTAnalysis of influence of components damping properties on disc brake dynamic instabilityMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLM, D-APLMEFMEDetails of topic0 / ----
11.DTAplikácia monitoru rizika na hodnotenie frekvencie tavenia aktívnej zóny pre definované konfigurácie jadrového bloku VVER 440Urban, F.Ústav energetických strojov a zariadení (FME)I-ESZFMEDetails of topic0 / 1--
12.DTUrčovanie a riadenie polohy CubeSat nano družiceGulan, M.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
13.DTAutomatic monitoring system of laboratory conditionĎuriš, S.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / ----
14.DisTNon-contact measurement of geometric shapes and distances for the needs of industrial roboticsVachálek, J.Institute of automation, measurement and applied informatics (FME)D-MTFMEDetails of topic0 / 2--
15.BTLaser Surveillance BlockingTakács, G.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 1--
16.DisTStress-strain analyzis for stir friction welding influence of various input parametersJančo, R.Institute of applied mechanics and mechatronics (FME)D-APLM, D-APLME, D-APLMExA, D-APLMxAFMEDetails of topic0 / 2--
17.DisTDetection of defects in piping systems using acoustic methodsJančo, R.Institute of applied mechanics and mechatronics (FME)D-APLM, D-APLMxAFMEDetails of topic0 / 2--
18.DisTDiagnostics of rotary machine failuresMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
19.DTATwo-axis Electro-mechanical Image StabilizationTakács, G.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / ----
20.DisTDynamic analsis of disc brakes squealMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
21.DTEducational process for creating intelligent components in Siemens Process SimulateVachálek, J.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
22.DisTEnergy, environmental and economic analysis of heat distribution using innovative air-to-water heat pumpsUrban, F.Ústav energetických strojov a zariadení (FME)D-ESZFMEDetails of topic0 / 1--
23.BTExperimental Modules for Automation EducationTakács, G.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / ----
24.DTExperimental device for practical implementation of adaptive predictive controlGulan, M.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
25.DTExperimental device for control of heating and air-conditioning processes in buildingsGulan, M.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
26.DisTIdentification and optimization of car suspension parametersMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
27.DisTIdentification and optimization of suspension parameters of car with flexible bodyworkMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
28.DTImplementation of the Monte Carlo method in metrologyPalenčár, R.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / ----
29.DisTInovation methods of mobile machines development with use of composite materialsGulan, L.Institute of transport technology and designing (FME)D-DSZFMEDetails of topic0 / ----
30.DisTSmart optimal control of building heating and air-conditioning processesRohaľ-Ilkiv, B.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / ----
31.DisTUniaxial compressibility of a powder materialPeciar, M.Institute of Process Engineering (FME)D-PTFMEDetails of topic0 / 2--
32.DisTCalibration of specific weight measuring instruments.Ďuriš, S.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / ----
33.DTKlimatizácia rodinného domu využitím prírodného zemného chladuFüri, B.Oddelenie chladiacej a klimatizačnej techniky (ÚESZ FME)I-TZBFCEDetails of topic0 / 1--
34.DTKlimatizácia rodinného domu využitím prírodného zemného chladuFüri, B.Oddelenie chladiacej a klimatizačnej techniky (ÚESZ FME)I-TZBFCEDetails of topic0 / 1--
35.DisTMagnetic separation of heavy metals in wastewaterVlnka, J.Institute of applied mechanics and mechatronics (FME)D-MECHFMEDetails of topic0 / 1--
36.DTMeausurement and evaluation of key geometric dimensions using a coordination measuring machineĎuriš, S.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / 1--
37.DTMeausurement and evaluation of key geometric dimensions using a coordination measuring machineĎuriš, S.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / 1--
38.BTMiniaturizing the "Magnetic Levitation" ExperimentTakács, G.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / ----
39.DisTModel of flow in a helium loopKnížat, B.Ústav energetických strojov a zariadení (FME)D-ESZFMEDetails of topic0 / 2--
40.DTModelling of DPS using FEM and FFB Neural NetworkVégh, P.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / ----
41.DisTReal-time structural health monitoring using embedded microcontrollersTakács, G.Institute of automation, measurement and applied informatics (FME)D-AISP, D-MECH, D-MECHTFMEDetails of topic0 / 1--
42.DisTRandom oscillation of nonlinear systemsMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
43.DisTNavigation and control of mobile autonomous mechatronic systemsRohaľ-Ilkiv, B.Institute of automation, measurement and applied informatics (FME)D-MECHFMEDetails of topic0 / ----
44.DisTNavigation and control of mobile autonomous mechatronic systemsRohaľ-Ilkiv, B.Institute of automation, measurement and applied informatics (FME)D-MECHTFMEDetails of topic0 / ----
45.BTDesign and construction of an autonomous robotic system based on Embedded platformsSlovák, J.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 1--
46.DTDesign of algorithms for navigation of a mobile robotRohaľ-Ilkiv, B.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
47.DisTAlternative material model proposal for numerical simulation of the behaviour of hyperplastic materialsÉcsi, L.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
48.DisTDesign and optimization of speed-dependent torsional dampers in automotive powertrainsMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
49.DisTDesign and optimization of the drive unit of the surfacing machineŠooš, Ľ.Institute of manufacturing systems, environmental technology and quality management (FME)D-VSAZFMEDetails of topic0 / ----
50.BTDesign and practical realization of an embedded prototyping platform for control educationGulan, M.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 1--
51.DisTDesign and verification of heat engine for low temperature heat sourcesMasaryk, M.Ústav energetických strojov a zariadení (FME)D-ESZFMEDetails of topic0 / 1--
52.BTDesign HMI for technological processBartalský, L.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / ----
53.DisTMaterial model proposal for modelling material degradation of metallic materials operating under extreme conditions including ductile-to-brittle failure mode transitionÉcsi, L.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / ----
54.DisTMaterial model proposal for modelling creep deformation in metallic materialsÉcsi, L.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / ----
55.DisTMaterial model proposal for numerical simulation of degradation of hyperelastic materials within the framework of phenomenological plasticityÉcsi, L.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / ----
56.DTDesign of a robotic workplace for welding aluminum bicycle framesVachálek, J.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
57.DisTNew advanced methods of traceability of blood pressure standards.Tesař, J.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / 1--
58.DisTNumerical analysis of problems with hyperelastic material modelJančo, R.Institute of applied mechanics and mechatronics (FME)D-APLM, D-APLME, D-APLMxAFMEDetails of topic0 / 2--
59.BTOff-line / On-line programming of robotsVachálek, J.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 3--
60.DTOff-line programming of ABB robotic arm performing point resistance weldingVachálek, J.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
61.DisTOptimization of ultrasonic cutting tool geometryMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
62.DisTOptimization of vehicle suspension parameters with adaptive controlMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
63.DisTOptimization of bicycle suspension parametersMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
64.BTDesign of placement of sensors using splinesVégh, P.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / ----
65.DisTParametric identification of piping system during the pressure testMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
66.DisTAdvanced Application of Generative Engineering Design in Automotive Body in White DevelopmentGulan, L.Institute of transport technology and designing (FME)D-DSZFMEDetails of topic0 / ----
67.DisTAssessment of seismic resistance of the structure with nonlinear suspensionMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
68.DisTAssessing the Impact of Mechanisms of Dynamic Instability on High Frequency Squeal Disc BrakesMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
69.DisTProbabilistic approach for piping systems on elastic foundationJančo, R.Institute of applied mechanics and mechatronics (FME)D-APLM, D-APLMExAFMEDetails of topic0 / 1--
70.DTPrediktívne riadenie laboratórneho modelu vrtuľníka s dvoma stupňami voľnostiGulan, M.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
71.DisTPredictive control of autonomous mobile systemsRohaľ-Ilkiv, B.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / 1--
72.DisTPredictive model predictive vibration control of mechanical structures by high-order modelsTakács, G.Institute of automation, measurement and applied informatics (FME)D-AISP, D-MECH, D-MECHTFMEDetails of topic0 / 1--
73.DTPredictive control of a laboratory teaching modelRohaľ-Ilkiv, B.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
74.DisTPredictive control of a mobile autonomous system on a given trajectory with obstacles.Rohaľ-Ilkiv, B.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / ----
75.DisTModel predictive vibration control using field programmable gate arraysTakács, G.Institute of automation, measurement and applied informatics (FME)D-AISP, D-MECH, D-MECHTFMEDetails of topic0 / ----
76.BTRebuilding Trabant on an electric carVlnka, J.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 2--
77.DisTIndustrial automation based on the concept of Industry 4.0Vachálek, J.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / 2--
78.DTRedukcia solárnej tepelnej záťaze továrenských hálFüri, B.Oddelenie chladiacej a klimatizačnej techniky (ÚESZ FME)I-TZBFCEDetails of topic0 / 1--
79.DTRedukcia solárnej tepelnej záťaze továrenských hálFüri, B.Oddelenie chladiacej a klimatizačnej techniky (ÚESZ FME)I-TZBFCEDetails of topic0 / 1--
80.DTRedukcia solárnej tepelnej záťaze továrenských hálFüri, B.Oddelenie chladiacej a klimatizačnej techniky (ÚESZ FME)I-TZBFCEDetails of topic0 / 1--
81.DTRedukcia solárnej tepelnej záťaze továrenských hálFüri, B.Oddelenie chladiacej a klimatizačnej techniky (ÚESZ FME)I-TZBFCEDetails of topic0 / 1--
82.DTReconstruction of the injection press with increased safetyVachálek, J.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
83.DTControl of dynamic systems with fuzzy and PID controllersVégh, P.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / ----
84.DTControl of a laboratory inverted pendulum systemGulan, M.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
85.BTMeasurement process controlPalenčár, J.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / ----
86.DTControl system for an electronic autonomous system using artificial intelligenceŠišmišová, D.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
87.DTRobotic line for welding reinforcements to seats for the automotive industry using ABB Spot Systems welding systemsVachálek, J.Institute of automation, measurement and applied informatics (FME)I-AISPFMEDetails of topic0 / 1--
88.DisTRobust control of temperature field of steel in the continuous casting process as distributed parameter systemsBelavý, C.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / 1--
89.DisTImage recognition for the needs of industrial and mobile roboticsVachálek, J.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / 2--
90.BTSiemens Smart HomeVachálek, J.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 2--
91.BTSiemens Technomatix PLM Process SimulateVachálek, J.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 2--
92.BTSmart Home based on the Z-Wave wireless protocolVachálek, J.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / 2--
93.DisTSolar ejector air-conditioning systemsMasaryk, M.Ústav energetických strojov a zariadení (FME)D-ESZFMEDetails of topic0 / ----
94.DTMeasurement process capability and its managementPalenčár, R.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / ----
95.DisTRobust control synthesis of distributed parameter systemsBelavý, C.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / 1--
96.DisTShape and dimensional optimization of pressing tools of densification machinesKrižan, P.Institute of manufacturing systems, environmental technology and quality management (FME)D-VSAZFMEDetails of topic0 / 1--
97.DisTShape and dimensional optimization of pressing tools of densification machinesKrižan, P.Institute of manufacturing systems, environmental technology and quality management (FME)D-VSZFMEDetails of topic0 / 1--
98.DisTVibration online diagnostics of axle bearings of railway wagonsMusil, M.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
99.DisTEmbedded linear predictive control for low-cost microcontrollersTakács, G.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / 1--
100.DisTEmbedded platforms and their application in industrial automation using operating system ROSVachálek, J.Institute of automation, measurement and applied informatics (FME)D-AISPFMEDetails of topic0 / 2--
101.DisTThe influence of additives on a convective transport of energy in non-isothermal turbulent flow of liquidsPeciar, M.Institute of Process Engineering (FME)D-PTFMEDetails of topic0 / ----
102.DisTInfluence of Biomechanical Parameters on Eye ApplanationHučko, B.Institute of applied mechanics and mechatronics (FME)D-APLMFMEDetails of topic0 / 1--
103.DTInfluence of extreme conditions simulated in climatic chamber for metrology control of breath analyzatorsĎuriš, S.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / ----
104.DisTEffect of microalloying on the mechanical properties of the Al-Si alloys with a high content of ironPokusová, M.Institute of manufacturing systems, environmental technology and quality management (FME)D-STMFMEDetails of topic0 / 1--
105.DTInfluencing factors on measurement accuracy intraocular preassure by optical tonometerĎuriš, S.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / 1--
106.DTEvaluation of the pressure transducer calibrationPalenčár, R.Institute of automation, measurement and applied informatics (FME)I-MESKFMEDetails of topic0 / 1--
107.DisTEvaluation of uncertainties in the calibration of measuring instrumentsPalenčár, R.Institute of automation, measurement and applied informatics (FME)D-MTFMEDetails of topic0 / 1--
108.DisTEvaluation of uncertainties in the calibration of measuring instrumentsPalenčár, R.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / 1--
109.DisTThe heat exchanger of the special constructionGužela, Š.Institute of Process Engineering (FME)D-PTECHFMEDetails of topic0 / ----
110.DisTResearch on optimization parameters for the 3D print processBeniak, J.Institute of manufacturing systems, environmental technology and quality management (FME)D-VSAZFMEDetails of topic0 / ----
111.DisTResearch on optimization parameters for the 3D print processBeniak, J.Institute of manufacturing systems, environmental technology and quality management (FME)D-VSZFMEDetails of topic0 / ----
112.DisTThe research of production technology for composite materials based on waste plastics and biomassKrižan, P.Institute of manufacturing systems, environmental technology and quality management (FME)D-VSAZFMEDetails of topic0 / 1--
113.DisTThe research of production technology for composite materials based on waste plastics and biomassKrižan, P.Institute of manufacturing systems, environmental technology and quality management (FME)D-VSZFMEDetails of topic0 / 1--
114.BTUsing Lego Mindstorms as a teaching aidŠišmišová, D.Institute of automation, measurement and applied informatics (FME)B-AISPFMEDetails of topic0 / ----
115.DisTDevelopment of LED-based standard sources for calibration of total luminous flux and total radiant flux in the spectral range from 300 nm to 1100 nm for application in gonio-photometry and gonio-spectro-radiometry.Tesař, J.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / 1--
116.DisTDevelopment of a primary standard for the electrolytic conductivity measurement of aqueous solutions in the low conductivity range from 0.055 μS / cm to 50 μS / cmTesař, J.Institute of automation, measurement and applied informatics (FME)D-METFMEDetails of topic0 / 1--