Oct 20, 2019   10:50 a.m. Vendelín
Academic information system

Summary of topics offered - Faculty of Materials Science and Technology in Trnava


Application shows list of current and approved topics offered under the selected department or under all its subordinate departments. You can limit the list of topics by the following criteria:

Use the following filter to restrict the displayed records.

Type of thesis:
Programme:
Topic supervisor:
Supervising department:

* | A | B | C | D | E | F | G | H | Ch | I | K | L | M | N | O | P | R | S | T | U | V | W | X | 3 | 5

Ord.TypeTopicThesis supervisorSupervising departmentProgrammeTrackIntended forDetailsOccupied/Max.Project participants
1.BTData archivation...Juhásová, B.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Vogel, T.
2.DTDeformation process in the chip rootPokorný, P.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / 2--
3.BTDesign of experimentsKotianová, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic0 / 1--
4.DTDigital marketing - analysis of individual tools and their usability in the industrial enterprise ŠVEC and SPOL, s.r.o. VráblePrajová, V.Institute of Industrial Engineering and Management (MTF)I-PMA--MTFDetails of topic0 / 1--
5.DTDigital marketing - analysis of individual tools and their usability in industrial enterprise (listed for year 2019/2020)Prajová, V.Institute of Industrial Engineering and Management (MTF)I-PPP--MTFDetails of topic0 / 1--
6.DTDistributed petrol station control system in PCS7 environmentMichaľčonok, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic0 / 1--
7.DTDesign of a robotic workstation for calibration bearingsBožek, P.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic0 / ----
8.BTDesign of injection moulding tool on termoplasticBílik, J.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / 1 Babiš, M.
9.BTDesign of the jig extending the possibilities of clamping rotating parts to the HZG4 DiffractometerKusá, M.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic1 / -- Burian, D.
10.DTDesign and production of injection moulding tools with aditives technologies utilizationBílik, J.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Dobrovszký, P.
11.BTDigital enterprise tools applied in industrial enterprise - ANTOLIN TRNAVA s.r.o.Prajová, V.Institute of Industrial Engineering and Management (MTF)B-PMA--MTFDetails of topic1 / 1 Horný, M.
12.BTDesign and analysis of drive and transmission unit of mechatronic systemRolník, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ--MTFDetails of topic1 / -- Horňák, T.
13.BTDesign and analysis of torque sensorRolník, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ--MTFDetails of topic1 / -- Hutár, M.
14.BTDesign and implementation of information system for custom furniture production.Križanová, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Zimka, M.
15.DTDesign and implementation of extending components of positioning fixture.Moravčíková, J.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Šedovič, V.
16.BTDesign and implementation of the educational aid for the PLA subjectNémeth, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Holický, M.
17.BTDesign and implementation of the educational aid for the PLA subjectNémeth, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Senneš, S.
18.BTDesign and realization of a model of intelligent electrical installation of a house using ATMEL microprocessors - hardware partHorváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Perička, J.
19.BTDesign and realization of model of intelligent electrical installation of house using ATMEL microprocessors - software partHorváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / -- Peter, R.
20.BTDesign and realization of quadcopter control using Arduino microprocessor moduleHorváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Skuhra, P.
21.BTDesign and realization of Smart Little Turtle Robot V.2 model control using Arduino microprocessor module and cross controller, including neural network based control subsystemHorváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Jančíová, B.
22.BTDesign and realization of sliding gate control using Arduino microprocessor module, using neural networksHorváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Uhlárová, I.
23.BTDesign and realization of control program and visualization for choosen part of line MPS500Bartoň, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Toman, J.
24.BTDesign and implementation of a system for the center of social servicesIringová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic0 / 1--
25.BTDesign and implementation of a system to support product quality control in a manufacturing companyIringová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / -- Riedlmajer, M.
26.BTDesign and implementation of control system for selected modules of the MPS 500 line using PLC SiemensBorkin, D. V.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / -- Frtús, J.
27.BTDesign and implementation of control system for selected modules of the MPS 500 line using PLC Siemens (master-slave circuit, PLC 1200 PLC 300)Borkin, D. V.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Krippnerová, A.
28.BTDesign and realization of interactive multimedia application for subject Designing of production systemsBožek, P.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic0 / 2--
29.DTDesign and production of hybrid manufacturing systemsMorovič, L.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Michálik, M.
30.BTDesign and manufacturing of preparation for tube formingKuruc, M.Department of Machining and Computer-aided Technologies (UVTE MTF)B-PPT--MTFDetails of topic1 / 1 Podolská, J.
31.DTDesign and production of parts using 3D metal printingPokorný, P.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Denko, M.
32.BTDesign and production of education model for the course FixturesKusá, M.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic0 / ----
33.BTDesign and creation of solid carbide mill model in CAD softwareVozár, M.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / -- Majtán, D.
34.DTDesign and development of universal gripper for handling plastic products in BOGE Elastmetall Slovakia a.s., TrnavaKusá, M.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Petrík, P.
35.DTDesign and development of universal gripping system for headlightsKošťál, P.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Potúček, M.
36.BTDesign and assembly of fuel tank for SCR systemVáclav, Š.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / 1 Čobrda, V.
37.BTDesign and implementation of the educational aid for the LSR subjectNémeth, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Jurkasová, D.
38.DTDesign and realisation of the mobile HMI for chosen part of the MPS500 production lineNémeth, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic1 / 1 Hanzel, E.
39.BTDesign and realization of simulation model of electric drive control system with flexible couplingMichaľčonok, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAB-AIA-PPMTFDetails of topic0 / 2--
40.DTDesign and simulation of automated workplace for welding of stampingsKošťál, P.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Kopiar, M.
41.BTDesign and creation of web portal for garden centerIringová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Kováč, R.
42.DTDesign of automation for synchronous ring orientation in packaging at Schaeffler s.r.o.Matúšová, M.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Zifčák, J.
43.DTDesign of automation for damage detection at synchronous ring packingHrušková, E.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / -- Mlynarčíková, M.
44.DTDesign of automated measuring of components in conditions of Schaeffler Skalica Ltd.Pokorný, P.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / 1--
45.DTDesign of an automated workplace in the environment of Process Simulate software use in virtual realityHolubek, R.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / -- Dávidek, J.
46.DTDesign of autonomous solution of moving and pressing head of inner ring with inclined transport plane using 3D printKusá, M.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / -- Končitý, P.
47.DTDesign and manufacturing parts for drag finishing machineBuranský, I.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / ----
48.DTDesign and production of clamping modular system componentsMoravčíková, J.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / 1--
49.BTDesign of electric melting furnace for copper alloysBajčičák, M.Institute of Production Technologies (MTF)B-VTE--MTFDetails of topic0 / ----
50.DTDesign of geometry and tool manufacturing for technological process of forming at production of tubes with contoured internal surfaceNecpal, M.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / 1--
51.BTDesign of an induction coil for heating a complex-shaped rotary componentBehúlová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ--MTFDetails of topic0 / ----
52.DTDesign of an induction coil for heating a complex-shaped rotary component using numerical simulationBehúlová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic0 / ----
53.DTDesign of information system for rental placeGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic1 / 1 Ardan, P.
54.BTDesign of coreboxes for sand mould for cast ship engine block productionŠuba, R.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic0 / ----
55.BTDesign of measurement of small diameter screw thread parametersMoravčíková, J.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic0 / 1--
56.BTDesign of clamping modular system componentsMoravčíková, J.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic0 / 1--
57.BTDesign of measurement of internal thread parametersMoravčíková, J.Institute of Production Technologies (MTF)B-VTE--MTFDetails of topic0 / 1--
58.BTDesign of measurement of internal thread parametersMoravčíková, J.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic0 / 1--
59.DTDesign of mathematical model of butt weld joint made of stainless steel and copper by laser beamHodúlová, E.Institute of Production Technologies (MTF)I-ZASM--MTFDetails of topic1 / 1 Hnilica, M.
60.DTDesign of a measurement plan for measuring a particular component on a coordinate measuring machineGörög, A.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / 2--
61.BTDesign of measurement of small diameter screw thread parametersMoravčíková, J.Institute of Production Technologies (MTF)B-VTE--MTFDetails of topic0 / 1--
62.BTDesign of the method for decision support in the area of corrective maintenanceHrušková, E.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic0 / ----
63.DTDesign of mobile workplace with collaborative robot UR for manipulation with plastic products at BOGE Elastmetall Slovakia a.s., TrnavaKošťál, P.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Balogh, M.
64.DTDesign of mobile equipment for inspection of piping systemsBučányová, M.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / 1 Hais, J.
65.DTDesign of the glass mold and influence of proposed renovation technologies on its durability in manufacturingKovaříková, I.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Minárech, I.
66.DTDesign of production line module with assembly robotKošťál, P.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic0 / 1--
67.DTDesign assembly of cable harnessesVáclav, Š.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Komůrka, M.
68.BTDesign of passenger car engine assemblyVáclav, Š.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / 1 Ďuroška, L.
69.BTDesign of piping assemblyVáclav, Š.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic1 / 1 Paluš, T.
70.BTDesign of assembly of robotic armVáclav, Š.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / 1 Matovič, D.
71.BTDesign of assembly of central bicycle compositionVáclav, Š.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / 1 Blaho, T.
72.BTDesign of roller conveyor assemblyVáclav, Š.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / 1 Špalek, M.
73.DTDesign of assembly of injection molding machinesVáclav, Š.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Petráš, M.
74.BTDesign of sand mould for cast pin connectorŠuba, R.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic0 / ----
75.DTDesign of a new layout and material flow conception due to the purposes of production expansion in the production line ZM-MAG of the production plant ZF Slovakia, a.s. TrnavaDelgado Sobrino, D. R.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / -- Korec, S.
76.DTDesign of a dressing tool for grinding wheel in the internal grinding machineBučányová, M.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / -- Vajay, J.
77.DTDesign of welding parameters for laser welding of Ni and TiKovaříková, I.Institute of Production Technologies (MTF)I-ZASM--MTFDetails of topic1 / 1 Lipár, T.
78.BTDesign of belt conveyor for bulk materialsMichal, D.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic1 / 1 Bulák, J.
79.BTDesign of pneumatic grasping deviceRužarovský, R.Department of Production Devices and Systems (UVTE MTF)B-VZS--MTFDetails of topic1 / 1 Mihálik, T.
80.BTDesign of pneumatic clamping deviceRužarovský, R.Department of Production Devices and Systems (UVTE MTF)B-VZS--MTFDetails of topic1 / 1 Csekei, M.
81.DTDesign of the workplace with collaborative robot for the CNC machine tendingRužarovský, R.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Kokoš, M.
82.DTDesign of jig for assembly of sub-groups of timber housesVáclav, Š.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Levák, M.
83.DTDesign of the tool for machining damaged sealing surfaces of steam generator in NPP type VVER 440Bučányová, M.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / 1 Sekera, M.
84.BTDesign of cutting tool in CAD software using measured geometryHrbál, J.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic0 / 1--
85.BTDesign of control system for model of angular robotŠimon, Š.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ--MTFDetails of topic0 / ----
86.BTDesign of production device control via PLC Allen BradleyRužarovský, R.Department of Production Devices and Systems (UVTE MTF)B-VZS--MTFDetails of topic1 / 1 Račák, M.
87.DTDesign of robotic workstation for the station of the output control of direction indicatorsRužarovský, R.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / -- Kuric, D.
88.BTDesign of robotic armMichal, D.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic1 / 1 Vallašek, J.
89.DTDesign of production cell robotization for bonding processRužarovský, R.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / 1 Horváth, Š.
90.BTDesign of robotized workplace in RobotStudio simulation softwareHolubek, R.Department of Production Devices and Systems (UVTE MTF)B-VZS--MTFDetails of topic1 / -- Zemko, F.
91.DTDesign of iCIM 3000 input-output position expansion in Process Simulate softwareHolubek, R.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / -- Kňažek, J.
92.BTDesign of materials joining in the production of power semiconductor componentsKoleňák, R.Institute of Production Technologies (MTF)B-VTVM--MTFDetails of topic0 / 1--
93.BTDesign of materials joining in the production of power semiconductor componentsKoleňák, R.Institute of Production Technologies (MTF)B-VTE--MTFDetails of topic0 / 1--
94.BTDesign of soldering method for ceramic materialsKoleňák, R.Institute of Production Technologies (MTF)B-VTVM--MTFDetails of topic0 / 1--
95.BTDesign of soldering method for ceramic materialsKoleňák, R.Institute of Production Technologies (MTF)B-VTE--MTFDetails of topic0 / 1--
96.BTDesign of soldering method for composite materialsKoleňák, R.Institute of Production Technologies (MTF)B-VTE--MTFDetails of topic1 / 1 Belko, M.
97.DTDesign of system measures to increase employee performance in an industrial enterpriseČambál, M.Institute of Industrial Engineering and Management (MTF)I-PMA--MTFDetails of topic0 / 1--
98.DTDesign of a 3-axis motion recognition systemGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic1 / 1 Mlynár, M.
99.DTDesign of asynchronous motor control system by means of control unit G120Michaľčonok, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic0 / 1--
100.DTDesign of testing workplace for mechatronic systemBožek, P.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / ----
101.DTDesign of testing workplace for technical systemBožek, P.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic0 / 2--
102.BTDesign of balance for measuring residual weight of material for 3d printingŠimon, Š.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ--MTFDetails of topic0 / ----
103.DTDesign of virtual commissioning for production device modelRužarovský, R.Department of Production Devices and Systems (UVTE MTF)I-VZS--MTFDetails of topic1 / 1 Skýpala, R.
104.BTDesign of visualization of control system for selected modules of MPS 500 line using PLC SiemensBorkin, D. V.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic2 / -- Dančišin, M.
Čapkovič, M.
105.BTDesign of visualization of control system for selected modules of MPS 500 line using PLC SiemensBorkin, D. V.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic0 / 1--
106.DTDesign of mold cavity insert for die casting of paddle wheelBajčičák, M.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic0 / ----
107.DTDesign of production and assembly of jig for machiningVáclav, Š.Institute of Production Technologies (MTF)I-PPN--MTFDetails of topic1 / 1 Mozolík, M.
108.DTDesign the device for handling cylindrical batteriesKošťál, P.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / 1 Babirát, M.
109.DTDesign of a device for granulate dosingVelíšek, K.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic0 / 1--
110.BTDesign of a mechanical stress measuring deviceGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Halják, R.
111.BTDesign of a pulse measuring deviceGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Ondrášik, J.
112.BTDesign of a pulse measuring deviceGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA--MTFDetails of topic1 / 1 Nemček, B.
113.BTDesign of device for approximate measurement of tool assembly lengthŠimna, V.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic0 / ----
114.DTDesign of welding jig for welding the steel cap of the Kaiser municipal vehicle tankKusá, M.Institute of Production Technologies (MTF)I-VZS--MTFDetails of topic1 / -- Remiaš, D.
115.BTDesign and simulation of tool production in CAD / CAMPokorný, P.Institute of Production Technologies (MTF)B-PPT--MTFDetails of topic1 / 1 Kubek, P.
116.BTDesign of interactive multimedia application for monographBožek, P.Institute of Production Technologies (MTF)B-VZS--MTFDetails of topic0 / 2--
117.DTDevelopment...Tanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic1 / -- Ravas, B.
118.DTDevelopment and implementation of the traceability systemKopček, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP--MTFDetails of topic1 / -- Lenkavský, R.