Oct 26, 2020   11:56 a.m. Demeter
Academic information system

Summary of topics offered - Faculty of Materials Science and Technology in Trnava


Application shows list of current and approved topics offered under the selected department or under all its subordinate departments. You can limit the list of topics by the following criteria:

Use the following filter to restrict the displayed records.

Type of thesis:
Programme:
Topic supervisor:
Supervising department:

* | A | B | C | D | E | F | G | H | Ch | I | K | L | M | N | O | P | R | S | T | U | V | W | 3

Ord.
Type
Topic
Thesis supervisor
Supervising department
Programme
Intended forDetails
Occupied/Max.
Project participants
1.
BTWire assisted additive manufacturing of light weight alloysInstitute of Production Technologies (MTF)B-VTE
MTF
Details of topic
1 / 1
2.
BT
Additive technologies used for biomedical parts productionŠugár, P.
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic2 / --
3.
DT
Analysis and evaluation of images obtained using thermocamera
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic
0 / 2
--
4.DT
Risk analysis of additive manufacturing
Buranská, E.
Department of Safety Engineering (UIBE MTF)
I-IBE
MTF
Details of topic
1 / 1
Kijovská, M.
5.
DT
Analysis of deformations caused by heat treatment in the production of shaped parts
Kusá, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / --
6.
BT
Analysis of electroerosive machining in the conditions of the company ZF Slovakia a.s.
Görög, A.
Institute of Production Technologies (MTF)
B-VTEMTF
Details of topic
1 / 1
7.
BT
Analysis of the implementation of hybrid processes for joining steel cold-formed carbody parts
Sahul, M.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
8.
BT
Analysis of the possibilities of the production innovation of reductions for the TFSI engine ignition coil wiring harness with the use of additive manufacturing
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1 Bartal, R.
9.DT
Analysis of the failure of the production of glass plates in the company Osram, a.s.
Matúšová, M.Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / 1
10.
DT
Analysis of processes and productivity increasing of part assembly by MTM methodology
Institute of Production Technologies (MTF)
I-VZSMTFDetails of topic
0 / --
--
11.
DT
Risk analysis by the handling of toxic substances in a chemical laboratory
Department of Safety Engineering (UIBE MTF)
I-IBE
MTFDetails of topic
1 / 1
Jadrná, M.
12.
BT
Analysis of the current state in the field of applications and software for welding and joining materials
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / ----
13.
BT
Analysis of the current state of welding jigs for robotized workplaces
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
Beňo, M.
14.
DT
Analysis of the trimetals Cu-Al -AlMg fabricated by explosion welding
Marônek, M.Institute of Production Technologies (MTF)I-ZASMMTFDetails of topic
0 / 1
--
15.
DT
Analysis of the trimetals Cu-Al -AlMg fabricated by explosion welding
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
0 / 1
--
16.DTAnalysis of bottlenecks in the chosen lineInstitute of Industrial Engineering and Management (MTF)I-PMA
MTF
Details of topic
1 / 1
17.
DT
Analysis of TOO size and structure changes for large bevel angles of carbon steel produced by thermal cutting
Institute of Production Technologies (MTF)I-ZASMMTF
Details of topic
0 / --
--
18.BT
Data analysis of coronavirus SARS-CoV-2 pandemic.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
0 / 1--
19.
DT
Risk analysis of selected machinery according to STN EN ISO 12 100Department of Safety Engineering (UIBE MTF)I-IBE
MTF
Details of topic1 / 1
20.
BT
Program to solve a system of linear equations in C
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
3 / 3
Ščasný, A.
Csalava, D.
Kuracina, S.
21.
BTApplication for simulation of dynamic changes of material structures; origami/kirigami principle; MuPAD (MATLAB)Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTFDetails of topic
0 / --
--
22.BT
Application for simulation of dynamic changes of material structures; rosette-like formations; MuPAD (MATLAB)
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
23.
DTApplication for early warning of line stoppage or endangerment of end customers through the information system
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
0 / 1
--
24.
BT
Software for analysis of amplitude variability in time series
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
Latkóczy, I.
25.
BT
Application for editing input APDL files of the ANSYS programme
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic
0 / --
--
26.
BT
Application for editing input APDL files for the ANSYS programmeĎuriš, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic0 / ----
27.
BT
Automatická navíjačka indukčných cievok
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic0 / --
--
28.
DT
Automatizácia testovacích činností vybraného modulu finančnej inštitúcie
Tanuška, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
29.DTData acquisition automation and crystallization process control
Institute of Materials (MTF)
I-AIPP
MTFDetails of topic0 / 1--
30.
BT
Safety of additive manufacturing in relation fine particles
Buranská, E.
Department of Safety Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / 1
--
31.BTSafety aspects of industrially synthesized nanoparticlesKucmanová, A.
Department of Safety Engineering (UIBE MTF)
B-IBEMTF
Details of topic
0 / --
--
32.DTRisks of chosen machines
Ústav integrovanej bezpečnosti (MTF)
I-IBEMTFDetails of topic1 / 1 Lorinc, D.
33.
DTDiagnostics an advanced maintenance toolMatúšová, M.Institute of Production Technologies (MTF)I-VZSMTFDetails of topic1 / 1 Krajčovič, E.
34.BTRemote-controlled model of the two-wheeled Segway vehicleInstitute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / --
35.
DTDigital twins of production lineInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / 1
36.
DT
Embedded applications with RTOS support onSTM32, EPS8266, ESP32 MCU
Ďuďák, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / 1 Schmidt, E.
37.
DT
Environmental suitable tratment of coffee waste
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1
38.BT
Ergonomics difficulty in assembly line
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / --
--
39.
DT
Erodological survey of the Bubeník (Trstená)
Sirotiak, M.Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1
40.DTEvaluacia autenticity spravodajskych clankov na baze machine learningu
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Šrámek, M.
41.
BT
Generative design of engineering components
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Hrbáček, L.
42.DT
Harmonic analysis of the roundness profile
Görög, A.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
43.
DT
Harmonic analysis of the surface roughness profile
Görög, A.
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic0 / 1
--
44.
DTVoice commands for devices control implemented in a microcontroller.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic1 / 1
45.BT
Evaluation of mineral and table waters
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTFDetails of topic1 / 1
46.DT
Evaluation of the use of personal protective equipment (PPE) in a laboratory
Kucmanová, A.Department of Safety Engineering (UIBE MTF)I-IBE
MTF
Details of topic
0 / ----
47.BT
Life cycle evaluation of electrodes for resistance butt welding
Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic
1 / --
48.
DT
HW modeule for mechanical vibration analysisĎuďák, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / 1
49.DT
HW module for noise vibration
Ďuďák, J.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
Ravas, M.
50.
BT
Hybrid Manufacturing Systems
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
51.
BT
Hydrometallurgical extraction of silver from used x-rays
Department of Environmental Engineering (UIBE MTF)
B-IBE
MTF
Details of topic0 / --
--
52.
DTIdentification of hazards related to rail defects on ŽSR train tracks.Szabová, Z.
Department of Safety Engineering (UIBE MTF)
I-IBEMTF
Details of topic
1 / 1
53.
DT
Identification of objects with variable period in astronomical observations using neural networks
Dobrotka, A.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic1 / 1 Vašová, S.
54.
DT
Conceptual design of laser device innovation for the production of metal parts by the method of additive productionRužarovský, R.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
Details of topic
1 / 1 Richnák, M.
55.BT
Implementation of a CNC grooving head on multiple spindle lathes
Kusá, M.Institute of Production Technologies (MTF)B-VZSMTFDetails of topic1 / 1
56.
BT
Implementation of e-learning into classical teaching for the subject Production TechnologyBučányová, M.Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 3
--
57.
DT
Implementation of object camera recognition capabilities into a trainning robotic station using an IRB 120 robot
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 1--
58.BT
Implementation of measuring system for 3 axis CNC milling machine controlled by arduino module
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / 1
Gazdík, M.
59.DTaaaTanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Karelová, N.
60.
DT
Implementácia strojového videnia v riadení robotizovaného pracoviska
Juhás, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Krajčovič, F.
61.
BT
Information system for fitness centerInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
1 / 1
62.
BT
Information system for hair salon
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic
1 / 1
Kolenčík, P.
63.
DT
Information system for moving company
Križanová, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
64.DTInitiation parameters of spruce woodRantuch, P.Ústav integrovanej bezpečnosti (MTF)I-IBE
MTF
Details of topic
1 / -- Purdek, S.
65.
BT
Incremental processes in metal forming
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
66.BTInformation system for shop with moddeling accessories
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
Frišo, P.
67.BT
Inormation system for public screening of movies
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / 1
68.
BTInnovative methods and practices electro-pneumatic controlInstitute of Production Technologies (MTF)
B-VZS
MTFDetails of topic0 / 1
--
69.
BT
Creation of e-study materials
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1
Straka, P.
70.
BT
Inovative methods and processes of pneumatics controlling
Institute of Production Technologies (MTF)
B-VZSMTF
Details of topic
0 / ----
71.
DT
Integrating data sources for the purpose ofInstitute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic1 / 1 Chren, J.
72.BTIS
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic
1 / --
73.
DT
Calibration of tactile sensors with a view to increasing the life of the sensorBožek, P.Institute of Production Technologies (MTF)
I-VZS
MTFDetails of topic
1 / 1
74.
DT
Sorting Trolley
Institute of Production Technologies (MTF)I-PPNMTF
Details of topic
1 / -- Dudás, G.
75.DT
Complex measurement of selected components using an optical 3D scanner
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
0 / 1
--
76.
BT
Design and creation of 3D models tool for profile bendingBílik, J.Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / 1
Bobovnický, D.
77.BTForming tool design on bending
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
Kačmár, B.
78.DT
Proposal of design and production process operations for plastic cover of CMR-I
Institute of Production Technologies (MTF)
I-PPNMTF
Details of topic
1 / 1
Mendel, I.
79.
DT
Design and development of diagnostic equipment jigs for automated calibration controlled by a computer
Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic
1 / 2
Šalát, J.
80.
BT
Design of a tool for the operation of assembling a plastic ring in a clutch bearing
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic1 / 1
81.
BTDesign of sheet metal forming toolŠugárová, J.
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / 1
--
82.
BT
Engineering design of the fixture for specific system
Kusá, M.Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 2
--
83.
BT
Design of the jig expanding the possibilities of the machine in the production of threadsKusá, M.
Institute of Production Technologies (MTF)
B-VZS
MTFDetails of topic1 / 1
84.
BT
Design of the shaft bearing in the lid of the container
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / -- Vymyslický, D.
85.
DT
Geometry inspection of cutting tools by optical 3D scanner
Buranský, I.
Institute of Production Technologies (MTF)
I-PPNMTF
Details of topic
2 / 1
86.
DT
Laser modified surfaces of dental implants
Institute of Production Technologies (MTF)
I-OAT
MTFDetails of topic
1 / --
87.DT
Laser engraving and cutting machine
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / -- Červenec, M.
88.
BT
Laser polishing
Šugár, P.Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic0 / ----
89.DTLaser polishing of biocompatible material surfacesŠugár, P.Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / -- Gendiar, I.
90.
DT
Laser micromachining of Ti-C composite material
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / --
91.
DT
Laser modified surfaces of forming tools
Institute of Production Technologies (MTF)
I-OATMTF
Details of topic
1 / 1 Krajčovič, D.
92.
BT
Macros in Powermill software
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
0 / 1
--
93.
BT
Manual for working with the collaborative robot DOBOT Magician
Janíček, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic0 / 1--
94.
DT
Mechanical properties of "transparent wood"
Department of Environmental Engineering (UIBE MTF)I-IBEMTFDetails of topic0 / ----
95.
BT
Meranie kvality vody v záhradnom jazierku
Nemlaha, E.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
1 / -- Kulla, R.
96.
BT
Measurement of effective surface of monolithic millVozár, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / 1--
97.BTMethods of measurement of microgeometry of machining tools
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
0 / 1
--
98.
BT
A component sorting workplace model based on the Arduino programmable module
Ďuriš, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / --
99.
BT
A component sorting workplace model based on the Arduino programmable module
Ďuriš, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic0 / 1
--
100.BTThe model of self-stabilizing platform
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / -- Peško, F.
101.
DT
Modeling and simulation of machined surface roughnessPeterka, J.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 2
Veselý, M.
102.
DisTModeling and simulation of selected processes and characteristics of the cutting processPeterka, J.Department of Machining and Computer-aided Technologies (UVTE MTF)
D-STAM
MTF
Details of topic0 / --
--
103.
DisTModeling and simulation of selected characteristics of the cutting processInstitute of Production Technologies (MTF)
D-STAM
MTFDetails of topic0 / 5
--
104.
BT
Modeling of roughness profile of turned surfaceGörög, A.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / 1
--
105.BTModeling of sheet components in software Fusion 360 & Inventor
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic1 / 1
106.
DT
Modeling tool life in cutting process
Necpal, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
107.BTThe modelling of forming technological process - cutting
Institute of Production Technologies (MTF)
B-PPTMTF
Details of topic
1 / --
108.BT
The modelling of forming technological process - open die forging
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / --
--
109.BT
The modernization of forging line with forging press LZK 4000 in conditions of HKS Forge, s.r.o.
Kapustová, M.
Institute of Production Technologies (MTF)
B-VTEMTF
Details of topic
1 / 1
110.
BT
Modernization of the network infrastructure of a medium-sized enterprise
Halenár, I.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 1
--
111.
DTMonitoring the parameters of industrial equipment using OPC-UAHalenár, I.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
112.BT
Possibilities of joining copper to steel
Kovačócy, P.
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
1 / --
Rences, A.
113.
BT
Possibilities of modification active parts of metal forming tools
Šugárová, J.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / 1
--
114.
BT
Possibilities of using the Siemens NX Mechatronics Concept Designer for the design of automated manufacturing device
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
Details of topic1 / 1 Konuš, M.
115.
DT
Possibilitie of blockchain technology
Schreiber, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / 1 Kotasz, Á.
116.
DT
Možnosti využitia virtuálnej reality pre podporu výučby v oblasti automatizácie.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 2
--
117.
BT
Ways of securing communication networks
Halenár, I.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
1 / 1
Znamenák, J.
118.
BT
Design and implementation API for sensoric system
Ďuďák, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
1 / 1
119.
BT
Design and implementation IoT module
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTF
Details of topic
1 / 1
120.
BT
Design and implementation IP/serial converter
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
121.
BT
Návrh a implementácia systému údržby pre firmu VUNAR Product a.s.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / -- Szabó, Ľ.
122.
BTDesign and preparation of production models for precision casting
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic1 / 1
123.
BT
Design and implementation of an electronic tool for calculating the parameters of cutting layers for the selected machining technology.Moravčíková, J.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic
1 / 1
124.
BT
IS
Juhásová, B.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic1 / -- Krištek, A.
125.
DT
Návrh a realizácia portálu pre podporu výučby predmetu Programovateľné logické automaty
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
0 / 1
--
126.
DTNávrh a realizácia riadiaceho programu a vizualizácie pre dopravníkový pásInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic1 / 1 Krchnák, M.
127.BT
Design and realization of control program and visualization for choosen part of line MPS500 with data collection
Bartoň, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1 Horváth, A.
128.
BT
Navrh a realizácia riadiaceho systému pre otočné montážne lôžko
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / --
Kasan, T.
129.
BT
Design and implementation of control circuits for stepper / DC motors for the Linux CNC platform
Horváth, D.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / 1 Domin, S.
130.
DT
Návrh a realizácia SCADA systému pre vybraný procesNémeth, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic1 / 1
131.
DT
Design and implementation of a system for collecting, processing and visualizing the results of automated software tests
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic0 / 1
--
132.
BT
Design and implementation of a system for a company providing cleaning servicesIringová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic1 / --
133.
BT
Design and implementation of a system for renting tools and equipment
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic1 / --
134.DTNávrh a realizácia virtuálneho modelu vybraného pracoviska výrobnej linky MPS500
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 5
--
135.BTDesign and simulation of a robotic workplace using by ABB RobotStudioRužarovský, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / 1
136.
BT
Design and simulation of component production in the Catia program
Pokorný, P.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic
1 / --
137.BTDesign and creation of the case studies in the augmented reality environment with a focus on the engineering industryInstitute of Production Technologies (MTF)B-VZSMTF
Details of topic
0 / --
--
138.
BT
Design and manufacture of special 3D printerMolnár, I.Institute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1 Holický, M.
139.
DT
Design and manufacture of positioning fixature of optical imaging deviceMoravčíková, J.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / 1
Rojko, M.
140.DT
Design and manufacturing of cutting tool for finishing operation
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
Miček, J.
141.DTDesign and production of a component in the conditions of EKOM spol. Ltd.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / --
Boor, M.
142.
BT
Design and manufacturing of chess pieces using additive technologyHrbál, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
143.
BT
Design and production of a selected part using CAD software and Rapid Prototyping technology
Milde, J.Institute of Production Technologies (MTF)
B-VTVM
MTFDetails of topic0 / 1
--
144.BTDesign and production of an educational model of the mechanism for the subject fixturesKusá, M.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 2
--
145.BTDesign and manufacturing of samples for precision casting
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic
1 / 1
146.
DT
Design and development of universal gripper for handling plastic productsInstitute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 1--
147.DTNávrh a implementácia detekcie pravdivosti informácii z textuŠpendla, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
0 / 1
--
148.
DT
IS
Juhásová, B.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Gajdoš, M.
149.DT
Design and implementation of a software sensor for ion-beam optics control of the 500 kV ion implanter at MTF STU
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Melicherčík, M.
150.DT
Design and comparison of measurement methods of selected component parameters
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / ----
151.
BT
Actuator design based on SMART materialsRolník, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZ
MTF
Details of topic
1 / 1
Pukanec, M.
152.DT
Design of algorithms and neural networks for predictive control of nonlinear mechatronic systems
Michaľčonok, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
153.
BTDesign of the automatic parking algorithm based on the Arduin systemInstitute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZMTF
Details of topic
1 / 1
154.BT
Design and implementation of an electronic tool for calculating the parameters of cutting layers for the selected machining technology.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / 1
--
155.
BTISJuhásová, B.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 2
--
156.
BT
Návrh a realizácia informačného systému pre evidovanie COVID19 testov
Špendla, L.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic
1 / 1
157.
DT
Design and implementation of information system for the department of traumatology of Trnava hospital
Križanová, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / 1 Krasňan, P.
158.
BTNávrh a realizácia IS pre autobazárNemlaha, E.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
159.
BT
Návrh a realizácia programu na riadenie a vizualizáciu vetrania garáže
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic1 / 1 Lenčéš, I.
160.
DT
Design and implementation of a system for a company providing reconstruction work
Iringová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic0 / --
--
161.DTProposal and implementation of a system for robotic testing of web applications.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / 1 Kubiš, M.
162.
DT
Návrh a realizácia zariadenia na meranie elektrických parametrov výkonových modulov
Nemlaha, E.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / --
--
163.
DT
Design and simulation of a robotic workplace in Tecnomatix Process Simulate
Department of Production Devices and Systems (UVTE MTF)I-VZS
MTF
Details of topic
2 / 2
164.
DT
Design of parts automatic loading into workplace of Bimeric machine in Schaeffler ltd.Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / --
--
165.
DT
Design of assembly workplace automation in the Schaeffler Skalica company
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1
166.DTDesign of an automated robotic workstation as part of a comprehensive line for a plastic injection press in the company Revol TT Consulting s.r.o. TrnavaInstitute of Production Technologies (MTF)I-VZSMTF
Details of topic
1 / --
167.
BT
Design of automated manufacturing device in the Siemens NX
Ružarovský, R.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
Details of topic
1 / 1
Maška, O.
168.DT
Design and development of the application for control and diagnostics of mechatronic systems
Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic
0 / 2
--
169.
DT
Proposal of Business Intelligence reports for Dell's Customer care departmentInstitute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic1 / 1 Antol, N.
170.BT
Design of a cleaning device for a robotic workplace
Václav, Š.Institute of Production Technologies (MTF)B-VZSMTFDetails of topic1 / 1
171.
BT
Design of tool holder for a drag finishing machine prototypeDepartment of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic0 / 1--
172.BTNávrh edukačnej pomôcky vo virtuálnej realite pre podporu výučby v oblasti automatizácie.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / --
--
173.
DT
Proposal of information system for employees position trackingKebísek, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic1 / --
174.
DTProposal of information system for administrative activitiesInstitute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
1 / -- Szmatanová, F.
175.
DT
Proposal of information system for logistics and warehousing
Kebísek, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
176.
DT
Design of an information system for monitoring tasks and projects in the company
Važan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
177.
BT
Proposal of information system for a company in agricultural production area
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
178.DTInnovation of dirop forging production using simulation programInstitute of Production Technologies (MTF)I-VTVM
MTF
Details of topic
1 / 1
179.
BT
Design of coreboxes for sand mould for cast ship engine block productionŠuba, R.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / --
180.DT
Design of a one-purpose pneumatic balancer manipulator in the company Revol TT Consulting s.r.o. Trnava
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / --
Belák, A.
181.
DT
Design of a single-purpose machine with a control station
Bučányová, M.
Institute of Production Technologies (MTF)
I-VZSMTFDetails of topic
1 / 1
182.
BTDesign of camera control during the installation of headlightsInstitute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
183.
DT
Design of the concept orientation of the parts in the automatic pressing module in the company Schaeffler s.r.o.Holubek, R.Institute of Production Technologies (MTF)
I-VTVM
MTFDetails of topic1 / --
184.DTDesign of an end effector of an industrial robotMudriková, A.Institute of Production Technologies (MTF)I-VZS
MTF
Details of topic1 / -- Michalec, R.
185.
DTDesign of a crane construction for a production hallKusá, M.
Faculty of Materials Science and Technology in Trnava
I-VZS
MTFDetails of topic1 / -- Marček, M.
186.
DT
The structural design and manufacturing preparation of fixature device of test samplesInstitute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / -- Horváth, P.
187.
DT
Bending tool computer aided design
Bílik, J.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic1 / 1
188.
DTProposal of a marketing strategy of a selected industrial enterprise based on the systemic implications of the USZP concept (academic year 2020/2021)Sakál, P.Institute of Industrial Engineering and Management (MTF)I-PMA
MTF
Details of topic
1 / 1
189.
BT
Design of a mechatronic device controlled by a PLC
Ružarovský, R.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
1 / 1
Lagin, O.
190.DTDesign of a measurement plan for measuring a particular component on a coordinate measuring machineGörög, A.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic0 / 2--
191.BTProposal of methodology for the preparation of a digital model for the process of virtual commissioning using method the software in the loop methodInstitute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
192.
BT
Design of a module for testing connectors in company coditions Leoni Slovakia Ltd.
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
Details of topic
1 / 1
Bežák, M.
193.BT
Design of assembly of CNC milling machine
Václav, Š.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1 Krištof, F.
194.BT
Design of electronic cigarette assembly
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1 Pastor, L.
195.
DT
Escalator installation design
Václav, Š.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1 Krnáč, T.
196.
BT
Design of car engine assembly
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
197.
BT
Design of assembly of a wood splitting machine
Václav, Š.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Matúš, M.
198.
BT
Design of an assembly workplace for the assembly of mountain bikes
Václav, Š.Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
1 / 1 Siklenka, M.
199.BT
Design of an assembly workplace for the assembly of shock absorbers in a motorcycle
Václav, Š.Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1
Vrábel, M.
200.
BT
Design assembly jig for the tool holder HSK E50
Jurina, F.
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPTMTFDetails of topic0 / 1--
201.
DT
Design of an assembly robotic workstation using power supply by photovoltaic technology with an output into the 500 kWpInstitute of Production Technologies (MTF)I-VZS
MTF
Details of topic
1 / 1
202.
DT
Design of tool for sheet metal forming processes
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic0 / 1
--
203.
BT
Design of sand mould for cast pin connector
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic0 / --
--
204.
DT
Design of a new solder alloy for joining power semiconductors
Institute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / --
205.
BT
Proposal for the improvement of the knowledge management system in the conditions of industrial enterprises
Institute of Industrial Engineering and Management (MTF)
B-PMAMTFDetails of topic2 / 2
206.
BT
Proposal for optimization of the process of renovation of drawing dies by machining in ŽP a.s.
Morovič, L.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic
1 / 1
Budinský, J.
207.
BT
Design of a palletizing robotized workplace in program Process Simulate
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1
208.
DTDesign of soldering parameters by electron beam of stainless steel and Cu plateDepartment of Welding and Materials Joining (UVTE MTF)
I-VTVM
MTF
Details of topic
1 / 1
209.
DT
Design of welding parameters for stainless steel and copper butt weld by laser beam
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / --
Horváth, K.
210.DT
Proposal of personnel strategy of a selected industrial enterprise based on systemic implications of the SCSR concept (academic year 2020/2021)
Sakál, P.Institute of Industrial Engineering and Management (MTF)
I-PMA
MTF
Details of topic
0 / 1
--
211.
BT
Proposal of production process for copy of tank cast hull
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / --
Skýpala, M.
212.
BT
Design of a workplace for arc technologies of welding and joining materials
Urminský, J.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / -- Šatura, R.
213.BTDesign of welding jigUrminský, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / ----
214.
BT
Design of fixture for rotating dynamometer
Department of Machining and Computer-aided Technologies (UVTE MTF)B-PPT
MTF
Details of topic0 / 1
--
215.DT
Receivables management proposal in a selected industrial enterprise
Institute of Industrial Engineering and Management (MTF)I-PMA
MTF
Details of topic
0 / 1
--
216.
DT
Proposal for rationalization of the assembly line
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1 Ďuračka, D.
217.
BT
Design of a reduction cone for machine center spindle
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
Trenčík, P.
218.
BT
Design of a control system for setting the torque value of a car wheel bolt tightener
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZMTFDetails of topic1 / --
219.
BT
Design of a plastic welding machine with PLCGašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / 1
220.
DTDesign of a robotic station for assembly operation in Faurecia Automotive Slovakia s.r.o.Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTFDetails of topic1 / 1
221.
DT
Návrh SCADA systémmu pre vybranú firmuInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
222.DTDesign of a sensory solution based on a microcontroller using MicroPythonGašpar, G.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
0 / 1
--
223.
DTDesign of a screwing station for the assembly a tensionerVáclav, Š.
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / 1
224.
DT
Design of sensing operational data and physical quantities
Važan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
0 / 1
--
225.
BT
Proposing method for soldering materials in the production of high-performance semiconductor components
Koleňák, R.Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / --
226.
BTProposing method for soldering materials in the production of high-performance semiconductor components
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / --
--
227.BT
Proposing method for soldering ceramic materials
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic1 / -- Blaško, J.
228.
BT
Proposing method for soldering ceramic materials
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / --
--
229.
BT
Proposing method for soldering composite materials
Koleňák, R.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic1 / --
230.
BT
Proposing method for soldering composite materials
Koleňák, R.Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic
0 / --
--
231.
BT
Design of a synchronous car wheel bolt tightenerNaď, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZ
MTF
Details of topic
0 / --
--
232.
BT
Design of a systematic solution of a two-piece recess grinding on hole grinders
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
233.
BTProposing method of welding technology and parameters for the repairing of damaged bronze castingsKostolný, I.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / 1
--
234.
BT
Proposing method of welding technology and parameters for the repairing of damaged brass castings
Kostolný, I.
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic1 / 1 Palkech, B.
235.
DTDesign of a test model of a dynamic control system for the development of machine learning algorithms
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic
0 / 1
--
236.
BT
Design of a universal jig for manual drilling of holes in selected components
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic1 / 1 Petrúšek, S.
237.
DT
Design of a universal clamping device
Šimna, V.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic1 / 1 Meliš, M.
238.
BT
Clamping design for machine vice
Šimna, V.Institute of Production Technologies (MTF)B-PPT
MTF
Details of topic1 / 1 Klofáč, K.
239.DT
Design of virtual plants controlled by PLC with software Factory I/O
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
2 / 2
Botka, L.
Rehák, T.
240.
DT
Proposal of the production strategy of a selected industrial enterprise based on the systemic implications of the SCSR concept (academic year 2020/2021)
Sakál, P.
Institute of Industrial Engineering and Management (MTF)
I-PMA
MTF
Details of topic0 / 1
--
241.
BT
Proposal of mould design for motorboat ship screw
Šuba, R.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / --
--
242.
DT
Design of a device for investigating the influence of the volume filling structure of 3D printed partsInstitute of Production Technologies (MTF)I-VZS
MTF
Details of topic0 / --
--
243.
DTDesign of a device for granulate dosingVelíšek, K.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
0 / 1
--
244.
BT
Proposal of a device for determining the tool assembly approximate lenghtInstitute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
245.
DT
Proposal of streamlining the reverse logistics in context of sustainable development
Fidlerová, H.Institute of Industrial Engineering and Management (MTF)I-PMA
MTF
Details of topic
1 / --
Čerešňa, L.
246.
BT
Proposal for improving the time of the production process of plastic injectionInstitute of Production Technologies (MTF)
B-VTVM
MTFDetails of topic1 / 1
247.
BT
Design of a welding positioner using computer aid
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
248.
BT
Design of a welding jig using computer aidUrminský, J.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / --
249.
BT
Design for additive manufacturingInstitute of Production Technologies (MTF)B-PPTMTF
Details of topic
1 / 1
250.
DTNN for identification of unattended baggageSchreiber, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic
0 / 1
--
251.
BT
Standardization of assembly operations
Václav, Š.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
252.
BT
New 3D simulation posibilities for production and logistic processes in TecnoMatix Plant SimulationDelgado Sobrino, D. R.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / --
--
253.
BT
New trends and innovations in the production of ring-shaped forgings
Kapustová, M.Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
Kubík, T. V.
254.
DTNumerical simulation and analysis of the influence of the pressing force on the mechanical properties of iron-based powder compacts
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / --
--
255.BT
Machining on CNC machines
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
3 / 1
Toman, M.
Molnár, V.
Kapustinec, T.
256.
BT
Machinability of materials during laser micromachining
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / -- Vlček, T.
257.
BT
Optical 3D scanning and part measurement in GOM Inspect software
Milde, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
Kohút, M.
258.
DT
Optimization of logistics in the automotive industry
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / 1
259.
DT
Optimization for the assembly of railway bearings
Ružarovský, R.Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic1 / 1
260.DT
Optimization of the CNC conventional metal spinning process
Šugárová, J.
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / 1
261.
DT
Optimisation of microstructure and properties of high-speed steel using laser beam surface treatmentČaus, A.Institute of Production Technologies (MTF)I-VTVM
MTF
Details of topic
1 / 1
262.DT
Optimalization of production process for rolled locks for radial needle rings
Bílik, J.Institute of Production Technologies (MTF)I-OAT
MTF
Details of topic
1 / 1
263.BT
Optimization of production processes using Plant Simulation software in Schaeffler
Matúšová, M.Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
264.
BT
PHP Rest ful API for IOT data
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1
Škoda, J.
265.
BT
Neural network base PID controller for PLC S7-1200
Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / --
Ruchovanský, O.
266.
BT
Computer aided design of technological processes
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / ----
267.
BT
Computer aided design and manufacturing of a complex componentPeterka, J.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
4 / --
Ikrényi, F.
Valachovič, T.
Málik, J.
Tariška, E.
268.
DT
Computer simulation of cutting tool wear
Necpal, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
269.
DT
The movement of the robot along the guide line formed by the conductor with electric current
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTF
Details of topic
0 / --
--
270.DTMarking and engraving of materials using fiber laser systemKovaříková, I.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
0 / 1
--
271.DT
Porosity measurement by CT device in the 3D printed parts.
Institute of Production Technologies (MTF)I-PPNMTFDetails of topic
1 / 1
272.
DT
Comparision of soldering and brazing copper pipes pipelinesKoleňák, R.
Institute of Production Technologies (MTF)
I-ZASMMTF
Details of topic
1 / --
273.DTComparison of aditive manufacturing module in software Fusion 360 & PowerMillKuruc, M.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
274.
BT
Comparison of reverse enginering in software Fusion 360 & PowerShape
Kuruc, M.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1 Štefek, G.
275.DT
Comparison of different cutting method of construction steels in DDO s.r.o. company
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / 1
--
276.
BT
Comparison of properties of test specimens made of ABS by two technologies
Bílik, J.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
Kunkelová, G.
277.
BTPortal for online teaching of Programmable logic controllersStrémy, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic
1 / --
278.
BT
Risk assessment at selected workplace
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
3 / 2
279.BT
Assessment of the model situation of the process of joining structural components from a technological and economic point of view
Kostolný, I.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
Bobček, L.
280.
BT
Assessment of the possibilities of reducing the porosity of compacts from powder mixtures using numerical simulation
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
0 / --
--
281.
BT
Assessment of risks of chosen technical devicesMartinka, J.Ústav integrovanej bezpečnosti (MTF)B-IBEMTF
Details of topic
1 / 1
282.
DT
Assessment of sorption materials effectiveness for the removal of petroleum substances from water
Sirotiak, M.Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic1 / 1 Krajčovičová, M.
283.BT
Food waste - analysis of consumer behavior and possibilities of its prevention
Šefčovičová, K.
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic0 / 1--
284.
DT
Use of branched control circuits
Flochová, J.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
Bányi, K.
285.BT
Fire safety of additive manufacturing materials
Department of Safety Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / 1
--
286.
BT
Prediction of the influence of the pressing force on the mechanical properties of iron-based powder compactsBehúlová, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-MTTZMTF
Details of topic
0 / --
--
287.DT
Direct soldering of SiC ceramic with active solder type Sn-Ag-Sb-Ti
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / --
288.DTProces tvorby akceptačných testov pre vybraný produktTanuška, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / -- Pavlíková, L.
289.
BT
Advanced manufacturing processes for surface modification of biomedical partsŠugár, P.
Institute of Production Technologies (MTF)
B-VTEMTF
Details of topic
0 / --
--
290.DT
Project design of a workplace for the production of concrete fences in the conditions of the company J&M Slovak s.r.o
Mudriková, A.Institute of Production Technologies (MTF)
I-VZS
MTFDetails of topic
1 / 1
Novosedlík, J.
291.
DT
Rationalization of component cleaning in the conditions of Schaeffler SkalicaPokorný, P.
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic
1 / 1
Novák, M.
292.DT
Rationalization of specific component production
Görög, A.
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 2
Masár, V.
293.DTCutting edge preparation of the CBN cutting insertsKuruc, M.
Institute of Production Technologies (MTF)
I-OAT
MTF
Details of topic
1 / 1
Benian, M.
294.
BT
Search in the field of computer algorithms and their adaptation to processes in production facilitiesZelník, R.Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
0 / 1
--
295.
DT
Retrofit of line for the plastic bags production
Gašpar, G.Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / 1
296.BT
Reverse engineering of automotive part
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic1 / 1
297.
BT
Reverse engineering of a rotary part
Milde, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
298.
DT
Reverse engineering of selected components
Milde, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
299.
DT
Riadenia robotického vysávača pomocou laserového scanera
Nemlaha, E.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / --
300.
BT
Electro-pneumatic control circuit of the device
Institute of Production Technologies (MTF)B-VZS
MTF
Details of topic
1 / --
301.BTSolution of algebraic equations up to the 4th degree, application in C # or Java
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIAMTFDetails of topic
0 / 1
--
302.BT
Solution of a definite integral by numerical methods, application in C # or Java
Liška, V.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIA
MTF
Details of topic0 / 2--
303.
DT
Rotary ultrasonic machining with high depth of cutKuruc, M.Institute of Production Technologies (MTF)I-PPNMTFDetails of topic1 / 1
304.
DT
Analysis of the most common causes of work accidents
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / 1 Stojkovič, M.
305.
DT
Traffic signs recognition by neural networksSchreiber, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / -- Stanek, R.
306.
DTVoice commands recognition for home devices controlInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / 1
307.BT
Sensory equipment of selected devices
Mudriková, A.
Institute of Production Technologies (MTF)
B-VZSMTFDetails of topic
1 / --
Antol, A.
308.DTSensory system based on ESP32
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 3
--
309.
BTExperimental investigation of cast aluminium alloy by destructive and non - destructive mothodsKritikos, M.
Institute of Production Technologies (MTF)
B-VTEMTF
Details of topic
1 / 1
310.DTInvestigation the influence of parameters for pulsed and ultrasonic welding of plastics on the welded joints quality
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTFDetails of topic
1 / 1
311.
BT
Testing of mechanical properties of lap joints
Kovačócy, P.Institute of Production Technologies (MTF)B-VTEMTF
Details of topic
1 / --
312.
DTStrengthening of surface layer of the components fabricated by additive technology using laser beam surface treatment
Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1
313.DTData processing in the SCADA system using the OEE indicatorĎuriš, R.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTFDetails of topic1 / -- Sedlák, D.
314.
BT
Care of cutting fluids used in the machining process
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTFDetails of topic
1 / 1
315.BTCurrent treds in utilisation of wire assisted additive manufacturingInstitute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / 1--
316.
BT
Light Pollution in Trnava
Department of Fire Protection Engineering (UIBE MTF)
B-IBE
MTFDetails of topic
1 / 1
Jakubec, R.
317.
DTChemical registration system for small and medium-sized enterprises
Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
0 / --
--
318.
DT
Chemical substance registration system for laboratoryÚstav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / --
319.
DT
Systém na evidovanie bugov v procese testovania softvéru
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
1 / --
320.BTStudy of factors influencing the spectral shift of selected water contaminantsPastierová, A.
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
1 / --
321.DT
Study of optical and mechanical stability of transparent wood
Department of Environmental Engineering (UIBE MTF)
I-IBE
MTF
Details of topic
0 / --
--
322.
BT
The study of stainless steel to copper solderabilityInstitute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
0 / --
--
323.BT
Study of explosion parameters of dispersed dust
Ústav integrovanej bezpečnosti (MTF)
B-IBEMTFDetails of topic1 / 1
324.
DT
Study of explosion parameters of dispersed dust
Kuracina, R.
Ústav integrovanej bezpečnosti (MTF)
I-IBEMTF
Details of topic
1 / 1
Ščasný, P.
325.
DT
Study of explosion parameters of dispersed dust depending on the igniter
Ústav integrovanej bezpečnosti (MTF)I-IBEMTF
Details of topic
1 / 1
326.
DT
Technological solution of bimetallic structural nodes of parts of boilers for waste incineration
Sahul, M.
Institute of Production Technologies (MTF)
I-VTVMMTFDetails of topic
1 / 1
Števko, M.
327.
DTTemperature logger utilizing ESP32Gašpar, G.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic
1 / 2
Felčír, M.
328.
DT
Thermoregulatory envelope for insulin pumpAbas, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
329.
BT
Cration of cutter location data in Autodesk Fusion 360 software
Kuruc, M.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
330.
BT
Creating e-learning support in designing cable harnesses
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / 1
Šterdas, J.
331.
BT
Creation of e-learning materials for the subject Cutting toolsInstitute of Production Technologies (MTF)B-VZS
MTF
Details of topic3 / 2 Matej, L.
Lukáč, P.
Planeta, L.
332.BT
Creating of e-study materials for subject Construction supported by PC (2D objects)
Hrušková, E.
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
1 / --
333.BT
Creation of e-study materials
Institute of Production Technologies (MTF)
B-VZS
MTF
Details of topic
0 / 1
--
334.
DT
Kinematics creation and simulation of 3D models in the program TecnoMatix Plant SimulationDelgado Sobrino, D. R.
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / -- Rendeková, T.
335.
BT
Guide creating for working position "planning production" in Schaeffler ltd.
Hrušková, E.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / --
336.
BT
Creation of a virtual model for educational purposes in the field of automation.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic0 / 1
--
337.BTCreation of drawings in Autodesk Fusion 360 softwareKuruc, M.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic1 / 1
338.
BT
Cration of the assemble in Autodesk Fusion 360 software
Institute of Production Technologies (MTF)B-PPTMTFDetails of topic1 / 1 Burza, P.
339.BTA full factor experiment for two factorsInstitute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / ----
340.
BT
Treatment and improvement of water quality in domestic conditions
Pastierová, A.Ústav integrovanej bezpečnosti (MTF)B-IBE
MTF
Details of topic1 / --
341.
BT
Modification of CAM program for NC code
Faculty of Materials Science and Technology in Trnava
B-PPT
MTF
Details of topic
1 / 1
342.
BT
Beehive weight cell with monitoring systemStřelec, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)B-AIAMTF
Details of topic
1 / 1 Bánó, J.
343.
BT
Virtual catapultInstitute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic0 / ----
344.
BT
Virtual control object for Siemens PLC for online teaching
Strémy, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic1 / --
345.
DT
Properties of metal parts produced by 3D printingPokorný, P.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
346.
DT
Properties of copper - steel lap joints welded by electron beamKovačócy, P.Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / --
Žáčik, O.
347.DTProperties of components extruded from composite materialsPokorný, P.
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic1 / -- Ižvolt, T.
348.
BT
Hydrogen technologies from the safety and environmental point of view
Soldán, M.Department of Environmental Engineering (UIBE MTF)B-IBE
MTF
Details of topic
1 / 1
349.BT
Impact of external heat flux on weight loss during wood burning
Rantuch, P.
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
0 / --
--
350.
BT
Filtration effect on the geometrical form tolerances evaluation on CMM.
Kritikos, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Kozák, M.
351.DT
Influence of focal position on the properties of electron beam welded copper - steel joints
Kovačócy, P.
Institute of Production Technologies (MTF)
I-VTVM
MTFDetails of topic
1 / --
Tóth, T.
352.
DT
The influence of strengthening curves generation at numerical simulation of seamless tubes drawing
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / --
--
353.
BT
Influence of cutting depth on roundness and roughness of turned surface
Görög, A.
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Kušnierová, K.
354.
DT
Influence of orientation and spacing on fire risk of electric cables
Martinka, J.Ústav integrovanej bezpečnosti (MTF)
I-IBE
MTFDetails of topic1 / 1 Kostický, Š.
355.DTThe Effect of welding parameters by mobile laser equipment on selected properties of tool steelsKovaříková, I.
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
Details of topic
1 / 1 Koník, M.
356.
DT
Effect of Wire and Arc Additive Manufacturing parameters on the microstructure and mechanical properties of AW5087 aluminium alloy components
Institute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / 1 Bakovka, J.
357.
DT
Influence of electron beam welding parameters on the properties of copper - stainless steel overlapped weld joints
Sahul, M.Institute of Production Technologies (MTF)I-VTVMMTFDetails of topic
1 / 1
Pavlík, M.
358.
BT
Influence of feed on roundness and roughness of turned surfaceGörög, A.
Institute of Production Technologies (MTF)
B-PPT
MTFDetails of topic
1 / 1
359.
DTImpact of wood surface treatment on critical heat fluxÚstav integrovanej bezpečnosti (MTF)
I-IBE
MTF
Details of topic
1 / --
360.
DT
Effect of mixing on the properties of laser welded copper - steel joints
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / -- Gunda, M.
361.BTStylus ball diameter effect on the position tolerances evaluation measured on CMM.Institute of Production Technologies (MTF)B-PPTMTFDetails of topic
0 / 1
--
362.
DisT
The influence of edge preparation on the tool life during the turning of difficult-to-cut materialsInstitute of Production Technologies (MTF)
D-STAM
MTF
Details of topic0 / --
--
363.
DT
Influence of reverse geometric modeling on geometric parameters of 3D CAD mode
Buranský, I.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
364.
DT
Influence of plasma cutting on the cut material properties
Urminský, J.
Institute of Production Technologies (MTF)
I-ZASMMTFDetails of topic0 / ----
365.BTInfluence of different cutting methods on dimension tolerances of complex shape partMarônek, M.Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
1 / 1
366.
DT
Influence of grinding feed rate on the quality of the cutting tool flutes
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic
1 / 1
367.
BT
Scanning speed effect on the position tolerances evaluation measured on CMM.
Institute of Production Technologies (MTF)
B-PPTMTFDetails of topic
1 / 1
Anderko, M.
368.
BT
Influence of technological parameters on forming parts properties
Bílik, J.Institute of Production Technologies (MTF)B-VTEMTFDetails of topic1 / 1 Baránek, D.
369.
BT
Impact of temperature on chosen woods colour change
Martinka, J.Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic
1 / 1
370.
DT
Effect of surface treatment of Al-Li alloy on the porosity of laser beam welded joints
Marônek, M.
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / 1
Kukan, P.
371.
DT
Influence of welded surfaces treatment by plasma cutting on weldability of carbon steels
Institute of Production Technologies (MTF)I-ZASM
MTF
Details of topic0 / ----
372.
DT
Cutting edge radius influence in machining process
Institute of Production Technologies (MTF)
I-PPNMTFDetails of topic0 / 1--
373.
DT
The influence of cutting edge radius sizes on the surface roughtness of machined surface
Department of Machining and Computer-aided Technologies (UVTE MTF)
I-PPN
MTFDetails of topic1 / 1
374.
DT
The influence of cutting edge radius sizes on tool wear of milling cutters
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1
375.
DTInfluence of selected photopolymers on dimensional accuracy of components in the process of DLP technology
Institute of Production Technologies (MTF)
I-PPNMTF
Details of topic
1 / 1
376.
DT
The effect of the voxel size on the aluminium parts defects evaluation by CT device.
Institute of Production Technologies (MTF)
I-PPNMTF
Details of topic
1 / 1 Detko, P.
377.
DT
The effect of the voxel size on the defects evaluation by CT device.
Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
0 / 1
--
378.
DT
Evaluation of the accuracy of selected dimensions of seamless steel tubes using 3D digitizationMorovič, L.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / --
379.BTCalculation of critical heat flux for initiation of burningRantuch, P.
Ústav integrovanej bezpečnosti (MTF)
B-IBE
MTF
Details of topic0 / ----
380.
BT
Seamless tubes manufacturing
Bílik, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
1 / 1
381.
BTProduction of components for LCD housingJurina, F.Department of Machining and Computer-aided Technologies (UVTE MTF)B-PPTMTF
Details of topic
1 / 1
382.BT
Production of injection molding plastic parts
Martinkovič, M.
Institute of Production Technologies (MTF)
B-VTVM
MTF
Details of topic
1 / 1
383.
DT
Production of stabilizing wings for additional fuel tank from aircraft with the assitence of reverse engineeringMilde, J.
Institute of Production Technologies (MTF)
I-PPN
MTFDetails of topic
1 / 1
384.
BTProduction of shaped plastic partPokorný, P.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1
Uhlík, M.
385.DT
Production of dies on a CNC lathe using CAM software Edgecam
Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
2 / --
386.
BT
The creation of the threats
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1
387.DTResearch of cold die drawing of tubes process using FEM simulationKapustová, M.Institute of Production Technologies (MTF)I-PPN
MTF
Details of topic
1 / -- Katona, G.
388.
DT
Research of cold die drawing of tubes process using computer simulation
Institute of Production Technologies (MTF)I-OATMTF
Details of topic
0 / 1--
389.
DT
The research of Inconel alloy welding by laser beam
Hodúlová, E.Institute of Production Technologies (MTF)I-VTVMMTFDetails of topic1 / -- Kollárová, J.
390.
DT
Research of weldability of stainless steel with copper by laser beam in pulse modeInstitute of Production Technologies (MTF)I-VTVM
MTF
Details of topic
0 / ----
391.
DTResearch of weldability of stainless steel with copper by laser beam in pulse modeInstitute of Production Technologies (MTF)I-ZASM
MTF
Details of topic
1 / --
392.
BT
High-precision methods of machining X-ray crystal optics surfaces
Pokorný, P.
Institute of Production Technologies (MTF)
B-VTVMMTFDetails of topic
1 / 1
Ferkodič, Š.
393.
DT
aaa
Tanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic
1 / --
Mĺkvy, D.
394.DT
aaa
Tanuška, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic
1 / -- Hornáček, D.
395.DT
Dataset for neural network for human layng behaviour identification
Schreiber, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTFDetails of topic0 / 1--
396.
DTDesign of new educational tools in the creation of e-learning support for teaching the subject Design of Production SystemsMatúšová, M.
Institute of Production Technologies (MTF)
I-VZS
MTFDetails of topic
0 / 1
--
397.
DT
Design a mobile application for smartphones to manage and optimizecontrol, maintenance and repair
Važan, P.Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPPMTFDetails of topic0 / 1--
398.
BT
Usage of additive WAAM technology
Institute of Production Technologies (MTF)
B-VTEMTF
Details of topic
1 / -- Zguriš, B.
399.
DT
Využitie Big Data analýz pri predikcii vývoja epidemiologickej situácie
Tanuška, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
1 / -- Zábranský, E.
400.
BT
CNC machines in carpentry
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Tomašovič, R.
401.BTThe use of beam technologies for joining of stainless steel to copperHodúlová, E.
Institute of Production Technologies (MTF)
B-VTE
MTFDetails of topic
0 / --
--
402.
BT
Use of machine learning methods in assignments checkingStrémy, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
1 / 1 Polák, Š.
403.
BTUse of high-speed cameras in weldingMarônek, M.
Institute of Production Technologies (MTF)
B-VTEMTFDetails of topic0 / 1--
404.
DisTBalancing of cutting toolsPeterka, J.
Faculty of Materials Science and Technology in Trnava
D-STAM
MTF
Details of topic
0 / --
--
405.
DisT
Balancing of cutting tools
Institute of Production Technologies (MTF)
D-STAM
MTF
Details of topic
0 / --
--
406.
DT
Development of a new generation modular production systemInstitute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
407.
DTDevelopment of subroutines for application of moving heat sources during welding in the ANSYS softwareBehúlová, M.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPPMTF
Details of topic
0 / --
--
408.DTDevelopment of technologies of manufacturing companies of the futureVažan, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
409.BT
Webový informačný systém technického zamerania
Juhás, M.Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTFDetails of topic0 / ----
410.DTRescue of persons from construction excavationsSzabová, Z.
Department of Safety Engineering (UIBE MTF)
I-IBEMTFDetails of topic
1 / 1
411.
DT
Basic elements of Virtual commissioning in the program TecnoMatix Plant Simulation: Case study using a SiL strategy
Institute of Production Technologies (MTF)I-VZSMTF
Details of topic
1 / -- Kučerová, M.
412.
BT
Introduction of plastic regranulation in automotive production
Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic
1 / 1 Záhumenský, M.
413.
DT
Implementation of UR collaborative robot into the production process
Institute of Applied Informatics, Automation and Mechatronics (MTF)I-AIPP
MTF
Details of topic1 / 1
414.DT
The introduction of a new plastic product in conditions of JIT Plastic s.r.o. company
Bílik, J.Institute of Production Technologies (MTF)
I-VTVM
MTF
Details of topic
1 / 1 Sládková, N.
415.
BT
Data collection from production line based on data flow methodStřelec, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-AIA
MTF
Details of topic
0 / 2
--
416.
DT
Streamlining inter-operational logistics in production
Institute of Production Technologies (MTF)
I-VZS
MTFDetails of topic1 / -- Bolebruch, R.
417.
DT
Streamlining JLR 462 assembly stations
Važan, P.
Institute of Applied Informatics, Automation and Mechatronics (MTF)
I-AIPP
MTF
Details of topic
0 / 1
--
418.
DT
Increasing the efficiency of JRL assembly stations
Institute of Industrial Engineering and Management (MTF)
I-PMA
MTF
Details of topic
0 / 1
--
419.
DT
Increasing the efficiency of JRL assembly stations
Institute of Industrial Engineering and Management (MTF)
I-PMA
MTFDetails of topic0 / 1
--
420.
BT
Recovery of silver from used PC keyboardsDepartment of Environmental Engineering (UIBE MTF)
B-IBE
MTF
Details of topic
0 / --
--
421.
DT
Unification of production assembly lines in order to increase productivity and reduce manual work through the robotization and automation of logistics flows
Institute of Production Technologies (MTF)
I-VZS
MTF
Details of topic
1 / 1
422.BTLaser weding of aluminium alloys
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic1 / 1
423.
BT
Concentrated energy source welding of combinations of materials intended for hot and cold forming
Institute of Production Technologies (MTF)
B-VTE
MTF
Details of topic
0 / --
--
424.DTWelding of stainless steel with copperUrminský, J.
Institute of Production Technologies (MTF)
I-ZASMMTF
Details of topic
1 / --
425.BT
Laser beam welding of lap joints
Institute of Production Technologies (MTF)
B-VTVM
MTFDetails of topic1 / --
426.
DT
Laser beam welding of stainless steel - brass lap joints
Institute of Production Technologies (MTF)
I-ZASM
MTF
Details of topic
1 / 1 Soukup, P.
427.BT
Pulsed and continuous laser welding
Kovačócy, P.Institute of Production Technologies (MTF)B-VTE
MTF
Details of topic
1 / -- Podkonický, M.
428.
DT
Electron beam welding of trimetal
Institute of Production Technologies (MTF)
I-ZASMMTF
Details of topic
1 / -- Kopúnek, M.
429.
DT
Life of cutting materials
Pokorný, P.Institute of Production Technologies (MTF)
I-PPN
MTF
Details of topic
1 / 1 Čižmárik, I.
430.
BT
3D model of device for the experimental diagnostics of mechanical failure of devices
Institute of Applied Informatics, Automation and Mechatronics (MTF)
B-MTTZMTF
Details of topic
1 / --
431.
BT
3D printing of metel parts
Pokorný, P.Institute of Production Technologies (MTF)
B-PPT
MTF
Details of topic1 / 1