Summary of topics offered - Institute of Production Technologies (MTF)Help


Application shows list of current and approved topics offered under the selected department or under all its subordinate departments. You can limit the list of topics by the following criteria:

Use the following filter to restrict the displayed records.

Type of thesis:
Programme:
Topic supervisor:
Supervising department:

* | A | B | C | D | E | F | G | H | Ch | I | K | L | M | O | P | R | S | T | U | V | W | X | 5

Ord.Type
Topic
Thesis supervisor
Supervising department
Programme
Intended for
Details
Occupied/Max.
Project participants
1.
BTAdditive manufacturing of aluminium alloy components by CMTSahul, M.
Institute of Production Technologies (MTF)
B-VTE
MTF
1 / 1 Stiller, M.
2.
DisTAditive manufacturing of components by arc overlay welding methods
Institute of Production Technologies (MTF)
D-STAM
MTFprohlížet
0 / --
--
3.DisTAditive manufacturing of components by arc overlay welding methodsInstitute of Production Technologies (MTF)D-STAMMTFprohlížet0 / --
--
4.
BT
Additive systems and 3D printing automation
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet1 / 1 Šoltýs, K.
5.
BT
Additive manufacturing methods
Šugár, P.
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet1 / -- Kalafut, D.
6.DTAnalysis and improvement of the production performance of a robotic workstation dedicated to the production of measuring devices for the BK polymer
Department of Production Devices and Systems (UVTE MTF)
I-VZSMTF1 / --
7.DT
Factors of the Working Environment Analysis of the Center of Excellence 5-Axis Machining CE5AM MTF STU
Pauliková, A.Institute of Production Technologies (MTF)I-VTVM
MTF
prohlížet1 / 1 Mužíková, V.
8.
BT
Material rest analyse for grinding process of synchronous ring
Institute of Production Technologies (MTF)
B-VZS
MTF
1 / -- Bordáč, O.
9.
BT
Analysis of the laser beam welding method of stainless steel to copper
Kovaříková, I.Institute of Production Technologies (MTF)B-VTEMTF1 / 1 Szabóová, H.
10.
BT
Analysis of the electron beam welding method of stainless steel to copper
Institute of Production Technologies (MTF)
B-VTEMTF1 / 1
11.DT
Analysis of the microstructure and mechanical properties of components produced with wire arc additive manufacturing
Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet
1 / 1
12.
DTAnalysis of part production possibilities of under conditions of KONŠTRUKTA - TireTech, a. s.
Institute of Production Technologies (MTF)
I-VTVMMTFprohlížet
1 / --
13.DT
Analysis of stress-strain states on film-substrate interface using numerical simulation
Behúlová, M.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
0 / --
--
14.
DT
Analysis of the deployment of multipurpose assembly and otherones equipments into the production process at BOGE at BOGE Elastmetall Slovakia a.s. Trnava
Holubek, R.Department of Production Devices and Systems (UVTE MTF)I-VZS
MTF
prohlížet1 / -- Čulík, M.
15.
BT
The light metal alloy forming processes analysis
Bílik, J.Institute of Production Technologies (MTF)
B-VTVM
MTFprohlížet
1 / 1
16.
DT
Analysis of dimensional stability of components made of powder mixtures during the heat treatmentBehúlová, M.Institute of Production Technologies (MTF)I-PPNMTF
0 / --
--
17.
BT
Analysis of technological possibilities for joining ceramics with composite materialDepartment of Welding and Materials Joining (UVTE MTF)
B-VTE
MTF
prohlížet
0 / 1
--
18.
DT
Influence of heat treatment of a component on dimensional accuracy.
Moravčíková, J.
Institute of Production Technologies (MTF)
I-PPNMTF1 / 1
19.
DT
Analysis of production activity of automatic line in conditions of ŠVEC a SPOL, s.r.o.
Institute of Production Technologies (MTF)I-VTVMMTF
1 / --
20.
BT
Surfaces analysing on rotary cutting tools
Buranský, I.Institute of Production Technologies (MTF)B-PPT
MTF
2 / 2
21.
DisT
The application of additive techniques for design and manufacturing of moulded parts and moulds for thermoplastics injection moulding
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / 1
--
22.
DT
Application of laser surface texturing in forming processes
Šugárová, J.
Institute of Production Technologies (MTF)
I-OAT
MTF
0 / 1
--
23.
BT
Application of tailored blanks technology in automotive industry
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet0 / 1--
24.
BTAutomation of control equipmentMudriková, A.Department of Production Devices and Systems (UVTE MTF)B-VZS
MTF
1 / --
25.
DT
Automate assembly and drawing creation with PTC Creo Parametric CAD softwareKošťál, P.
Institute of Production Technologies (MTF)
I-VZS
MTF
1 / 1
26.DTAutomated design of technological processesPeterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / --
--
27.
DT
Balancing of cutting toolsPeterka, J.
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet
1 / --
Michalec, M.
28.
BT
Finishing of complex shaped parts made of alloy EN AW-5754 H111
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet1 / 1 Letko, A.
29.
DT
Surface roughnessInstitute of Production Technologies (MTF)I-PPN
MTF
prohlížet0 / ----
30.
BT
Economical estimate of low batch cast frame productionŠuba, R.Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet0 / --
--
31.
DT
Filtration of data for surface roughness measurementGörögová, I.Institute of Production Technologies (MTF)I-OAT
MTF
prohlížet0 / 1
--
32.
DTMilling with modified tool radiusInstitute of Production Technologies (MTF)I-PPNMTF0 / 1--
33.
DT
The milling of difficult-to-cut materials
Vopát, T.
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet
0 / 1
--
34.BT
Geometry of cutting tools
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
1 / 1
Večerová, M.
35.
BT
Chemical and electrochemical machining - educational video
Görögová, I.
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet0 / 1--
36.
BTCooling during synchronous rings grindingGörög, A.Institute of Production Technologies (MTF)B-VTE
MTF
prohlížet1 / 1 Vizváry, Z.
37.
DT
Design of a robotic workstation for calibration bearingsBožek, P.
Institute of Production Technologies (MTF)
I-PPNMTF
1 / --
Švančara, P.
38.DTDesign of a robotic workstation for calibration bearings
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / ----
39.
DTImplementation of object camera recognition capabilities into a trainning robotic station using an IRB 120 robot
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / 1
--
40.
DT
Implementation of augmented reality in assembly line production
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1 Böhm, P.
41.BTIncremental forming processesŠugárová, J.Institute of Production Technologies (MTF)
B-VTE
MTF
1 / 1
Beňo, J.
42.DisTIncremental sheet metal forming of laser welded blanksŠugárová, J.Institute of Production Technologies (MTF)D-STAMMTFprohlížet
0 / 1
--
43.
DT
Innovation of material flow on assembly line in MTA Slovakia s.r.o.
Institute of Production Technologies (MTF)
I-VZS
MTFprohlížet1 / 1 Červeňan, R.
44.
DisT
Interaction of solder at application of an active ultrasound
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / --
--
45.DT
Complex measurement of selected pars in the GOM Inspect software
Milde, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
1 / 1
Nagy, P.
46.BTComputer aided design of injection molding toolsInstitute of Production Technologies (MTF)B-PPTMTFprohlížet1 / 1
47.
DT
Computer aided design of mould on injection moulding
Bílik, J.Institute of Production Technologies (MTF)I-PPNMTFprohlížet
1 / 1
Cíbik, M.
48.BTDesign of injection moulding tool on termoplasticBílik, J.Institute of Production Technologies (MTF)B-PPTMTFprohlížet
1 / 1
49.
DT
Computer aided design of tool on set productionBílik, J.Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet1 / 1
50.
BT
Forming tool design on bending
Bílik, J.Institute of Production Technologies (MTF)B-PPTMTFprohlížet1 / 1 Kačmár, B.
51.
BT
Engineering design of the fixture for a specific clamping systemInstitute of Production Technologies (MTF)
B-VZS
MTF
0 / --
--
52.
BT
Design of the jig extending the possibilities of clamping rotating parts to the HZG4 Diffractometer
Kusá, M.Institute of Production Technologies (MTF)B-VZS
MTF
1 / --
53.BT
Control of surface profile and microgeometry
Moravčíková, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1--
54.
BTLaser polishingInstitute of Production Technologies (MTF)B-VTEMTF0 / ----
55.
BTLaser machining of biocompatible materialsLudrovcová, B.Institute of Production Technologies (MTF)
B-VTE
MTFprohlížet1 / 1 Zguriš, B.
56.BTLaser machining of PM processed titanium compositeLudrovcová, B.
Institute of Production Technologies (MTF)
B-VTE
MTFprohlížet
1 / 1
Kamhal, J.
57.
DT
Material flow of the production system
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF0 / ----
58.
DTTemperature measurement during machining
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet1 / --
59.
BT
Measurement of a selected part by optical 3D scanner
Milde, J.Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1
--
60.
DT
Modeling and numerical simulation of laser welding processes in keyhole modeBehúlová, M.Institute of Production Technologies (MTF)I-PPNMTFprohlížet0 / --
--
61.
DisT
Modeling and numerical simulation of the production of dissimilar weld joints by concentrated energy sources
Institute of Production Technologies (MTF)
D-PMMDxA
D-PMMD
D-STAM
MTF0 / --
--
62.
DT
Modeling and simulation of technological process of forming at production of tubes with contoured internal surface
Necpal, M.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1--
63.
DisT
Modeling of machined surfaces based on physical causes of their origin
Institute of Production Technologies (MTF)
D-STAM
MTF
prohlížet0 / --
--
64.
BT
Part modelling by generative designBuranský, I.
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet1 / 1
65.
DT
Modelling of special cutting tools
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet1 / 1
66.BT
The modernization of forging line with forging press LZK 4000 in conditions of HKS Forge, s.r.o.
Kapustová, M.
Institute of Production Technologies (MTF)
B-VTE
MTF
1 / 1
67.
BT
The modernization of forging line with forging press LZK 4000 in conditions of HKS Forge, s.r.o.
Kapustová, M.
Institute of Production Technologies (MTF)
B-VTVMMTF
0 / 1
--
68.
DisT
Modification of the tribological properties of the active parts of tools
Institute of Production Technologies (MTF)
D-STAMMTFprohlížet
0 / 1
--
69.
DT
Design and production of injection moulding tools with aditives technologies utilization
Institute of Production Technologies (MTF)
I-PPN
MTF1 / 1
70.
BT
Possibilities of material flow designMudriková, A.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTFprohlížet1 / -- Liptáková, B.
71.
BTThe abilities of forming tools surfaces improvementŠugárová, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet0 / 1--
72.
BT
Possibilities of using the education robot Dobot Magician
Holubek, R.
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
prohlížet1 / --
73.
BT
Replacement of aluminum carbide tools coated with ALCrN with FeinAlMatúšová, M.Institute of Production Technologies (MTF)
B-VZS
MTFprohlížet1 / 1 Masaryk, S.
74.
DT
Design and implementation of extending components of positioning fixture.
Moravčíková, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
Šedovič, V.
75.
DT
Design and implementation of supply system for assembly equipmentBožek, P.Department of Production Devices and Systems (UVTE MTF)I-AIPPMTF1 / 1
76.
BT
Design and realization of interactive multimedia application for subject Designing of production systems
Institute of Production Technologies (MTF)
B-VZSMTF0 / 2--
77.
DT
Design and simulation of robotic workplace for automobile body welding
Václav, Š.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet1 / 1 Kalnássy, I.
78.
DT
Design and production of hybrid manufacturing systemsMorovič, L.Institute of Production Technologies (MTF)I-PPNMTFprohlížet1 / 1
79.
DT
Design and manufacturing of gearbox for drag equipment
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
1 / 1
Hanuliak, L.
80.
BT
Design and manufacturing of preparation for tube forming
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPT
MTF
1 / 1
81.
DT
Design and production of parts using 3D metal printingPokorný, P.Institute of Production Technologies (MTF)I-PPNMTF
1 / 1
82.BTDesign and production of education model for the course Fixtures
Institute of Production Technologies (MTF)
B-VZS
MTFprohlížet
0 / --
--
83.BTDesign and creation of solid carbide mill model in CAD software
Institute of Production Technologies (MTF)
B-PPTMTF
2 / --
Majtán, D.
Deters, M.
84.
DT
Design and development of universal gripper for handling plastic products in BOGE Elastmetall Slovakia a.s., Trnava
Kusá, M.Institute of Production Technologies (MTF)I-VZS
MTF
1 / 1
85.DT
Design and development of universal gripping system for headlights
Institute of Production Technologies (MTF)I-VZS
MTF
1 / 1 Potúček, M.
86.BT
Design and assembly of fuel tank for SCR system
Václav, Š.Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
1 / 1
87.DTDesign and simulation of automated workplace for welding of stampingsKošťál, P.Institute of Production Technologies (MTF)
I-VZS
MTFprohlížet
1 / 1
Kopiar, M.
88.
DT
Design of automation for synchronous ring orientation in packaging at Schaeffler s.r.o.Matúšová, M.
Institute of Production Technologies (MTF)
I-VZSMTF1 / 1 Zifčák, J.
89.
DT
Design of automation for damage detection at synchronous ring packingHrušková, E.
Institute of Production Technologies (MTF)
I-VZS
MTF1 / -- Mlynarčíková, M.
90.
BT
Automation process design of manual workplaceMichal, D.
Institute of Production Technologies (MTF)
B-VZS
MTF1 / 1
91.
DT
Design of an automated workplace in the environment of Process Simulate software use in virtual reality
Department of Production Devices and Systems (UVTE MTF)
I-VZSMTF
1 / --
Dávidek, J.
92.
DTDesign of autonomous solution of moving and pressing head of inner ring with inclined transport plane using 3D print
Institute of Production Technologies (MTF)
I-VZS
MTF
1 / --
93.
DT
Design and manufacturing parts for drag finishing machine
Institute of Production Technologies (MTF)
I-PPNMTF
1 / --
Galko, F.
94.
DTDesign and production of clamping modular system components
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
95.
BTDesign of electric melting furnace for copper alloys
Institute of Production Technologies (MTF)
B-VTEMTF
0 / --
--
96.DT
Design of geometry and tool manufacturing for technological process of forming at production of tubes with contoured internal surface
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
97.BTDesign of coreboxes for sand mould for cast ship engine block production
Institute of Production Technologies (MTF)
B-PPTMTF0 / --
--
98.
BT
Design of measurement of small diameter screw thread parameters
Moravčíková, J.Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1--
99.BTDesign of clamping modular system componentsMoravčíková, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
0 / 1
--
100.
DTConcept design of automation measurement of the pitch circle at cylindrical bearingHrušková, E.Institute of Production Technologies (MTF)
I-VZS
MTF
prohlížet
1 / --
Polák, M.
101.
BT
Design of measurement of internal thread parameters
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet1 / 1 Juhás, A.
102.
BT
Design of measurement of internal thread parametersInstitute of Production Technologies (MTF)B-VTEMTF
0 / 1
--
103.DT
Design of mathematical model of butt weld joint made of stainless steel and copper by laser beam
Hodúlová, E.Institute of Production Technologies (MTF)I-ZASMMTF
1 / 1
Hnilica, M.
104.
DTDesign of a measurement plan for measuring a particular component on a coordinate measuring machineInstitute of Production Technologies (MTF)I-PPNMTFprohlížet
0 / 2
--
105.BTCreating a measurement plan in CalypsoGörögová, I.Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 2--
106.BTDesign of measurement of small diameter screw thread parametersMoravčíková, J.
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet0 / 1--
107.
BTProposal of joining methods of rotary segmentsInstitute of Production Technologies (MTF)
B-VTVM
MTFprohlížet
1 / 1
108.
BT
Design of the method for decision support in the area of corrective maintenance
Institute of Production Technologies (MTF)
B-VZSMTFprohlížet
0 / --
--
109.
DisT
Methodology design for designing assembly workstations and systemsInstitute of Production Technologies (MTF)D-VZAS
MTF
0 / 2--
110.
DisTDesign of methodology for projecting of the robotic workstations in Industry 4.0 conceptHolubek, R.Institute of Production Technologies (MTF)
D-VZAS
MTF
0 / ----
111.
DisT
Proposal of methodology for the rationalization of assembly workplaces and systems
Institute of Production Technologies (MTF)
D-STAM
MTFprohlížet
0 / 2
--
112.DisT
Proposal of methodology of creation of digital twin and virtual commissioning of production system
Institute of Production Technologies (MTF)
D-VZAS
MTF
prohlížet
0 / 1
--
113.
DT
Proposal of welding method and equipment for welding of aluminium components
Kovačócy, P.
Institute of Production Technologies (MTF)
I-VTVMMTFprohlížet1 / 1 Liko, R.
114.DTProposal of welding method and equipment for welding of flanges
Institute of Production Technologies (MTF)
I-VTVM
MTF
1 / 1
115.
DT
Design of mobile workplace with collaborative robot UR for manipulation with plastic products at BOGE Elastmetall Slovakia a.s., TrnavaKošťál, P.
Institute of Production Technologies (MTF)
I-VZS
MTF1 / 1
116.
DT
Design of mobile equipment for inspection of piping systems
Bučányová, M.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTFprohlížet
1 / 1
117.
DTThe design of pattern plates for the DISAMATIC D3 Vertical Moulding MachineBajčičák, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / --
--
118.
DT
Design of the glass mold and influence of proposed renovation technologies on its durability in manufacturing
Institute of Production Technologies (MTF)
I-PPN
MTF1 / 1
119.
DT
Design of production line module with assembly robot
Košťál, P.
Institute of Production Technologies (MTF)
I-VZSMTF0 / 1--
120.
BT
Design of production line module with assembly robot
Košťál, P.
Institute of Production Technologies (MTF)
B-VZS
MTF
1 / 1
Kotian, M.
121.DTDesign assembly of cable harnessesVáclav, Š.
Institute of Production Technologies (MTF)
I-VZSMTFprohlížet1 / 1
122.
BT
Design of the assembly process for the short-barrelled firearm Glock 26
Department of Production Devices and Systems (UVTE MTF)
B-PPT
MTF
1 / --
123.
BT
Design of passenger car engine assembly
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
1 / 1
124.BT
Design of piping assembly
Institute of Production Technologies (MTF)
B-VZS
MTF
1 / 1
Paluš, T.
125.
BTDesign of assembly of robotic armInstitute of Production Technologies (MTF)
B-PPT
MTF1 / 1 Matovič, D.
126.BT
Design of assembly of central bicycle composition
Institute of Production Technologies (MTF)B-PPT
MTF
1 / 1
Blaho, T.
127.
BT
Design of roller conveyor assemblyVáclav, Š.Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
1 / 1
128.
DT
Design of assembly of injection molding machines
Václav, Š.Institute of Production Technologies (MTF)I-PPN
MTF
1 / 1
Petráš, M.
129.BT
Design of assembly procedure for grape harvesting equipment
Václav, Š.
Institute of Production Technologies (MTF)
B-PPT
MTF1 / 1 Marcinek, J.
130.
DT
Analysis of the deployment of multipurpose assembly and otherones equipments into the production process at BOGE at BOGE Elastmetall Slovakia a.s.Trnava
Department of Production Devices and Systems (UVTE MTF)
I-VZSMTF1 / --
131.BT
Design of sand mould for cast pin connector
Šuba, R.Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / --
--
132.
DT
Design of a new layout and material flow conception due to the purposes of production expansion in the production line ZM-MAG of the production plant ZF Slovakia, a.s. Trnava
Delgado Sobrino, D. R.Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
prohlížet1 / --
133.BTProposal of improved maintenance of quenching line in Schaeffler Skalica, spol. s r.o.Šuba, R.
Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet1 / -- Baran, L.
134.
DT
Design of a dressing tool for grinding wheel in the internal grinding machine
Bučányová, M.Department of Production Devices and Systems (UVTE MTF)I-VZSMTF1 / --
135.
DT
Design of parameters for CBN machining and their influence on selected characteristicsKuruc, M.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
1 / 1
136.
DT
Design of welding parameters for laser welding of Ni and Ti
Institute of Production Technologies (MTF)
I-ZASM
MTF
1 / 1
137.BT
Design of belt conveyor for bulk materials
Institute of Production Technologies (MTF)B-VZSMTF1 / 1
138.BT
Design of pneumatic grasping device
Ružarovský, R.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
1 / 1
139.
BT
Design of pneumatic clamping deviceRužarovský, R.
Department of Production Devices and Systems (UVTE MTF)
B-VZSMTF1 / 1
140.
BTProposal of tank hull replica production processInstitute of Production Technologies (MTF)
B-VTE
MTF
prohlížet0 / ----
141.BTProposal of tank turret replica production process
Institute of Production Technologies (MTF)
B-VTEMTF0 / --
--
142.BTxxxxMatúšová, M.Institute of Production Technologies (MTF)
B-VZS
MTF
1 / 1
Medlen, D.
143.
DT
Design of the workplace with collaborative robot for the CNC machine tending
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet1 / 1 Kokoš, M.
144.
BT
Design of the tool for bearing pressing into the bicycle frames
Institute of Production Technologies (MTF)B-PPT
MTF
prohlížet
1 / 1
Dian, F.
145.
DT
Design of jig for assembly of sub-groups of timber houses
Institute of Production Technologies (MTF)
I-VZS
MTF
1 / 1 Levák, M.
146.
DTDesign of the tool for machining damaged sealing surfaces of steam generator in NPP type VVER 440Bučányová, M.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / 1
Sekera, M.
147.
DT
Proposal of rationalization measures in ZF Levice
Institute of Production Technologies (MTF)
I-VTVM
MTF
prohlížet1 / 1 Kamenszká, A.
148.
BT
Design of cutting tool in CAD software using measured geometry
Hrbál, J.Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
0 / 1
--
149.BT
Design of production device control via PLC Allen Bradley
Ružarovský, R.
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
1 / 1
150.
DT
Design of robotic workstation for the station of the output control of direction indicators
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / --
151.
BT
Design of robotic arm
Michal, D.Institute of Production Technologies (MTF)
B-VZS
MTFprohlížet1 / 1 Vallašek, J.
152.DTDesign of production cell robotization for bonding processRužarovský, R.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
prohlížet1 / 1 Horváth, Š.
153.
BTDesign of robotized workplace in RobotStudio simulation software
Department of Production Devices and Systems (UVTE MTF)
B-VZSMTF
1 / --
154.DT
Design of iCIM 3000 input-output position expansion in Process Simulate software
Holubek, R.Department of Production Devices and Systems (UVTE MTF)I-VZSMTF
1 / --
Kňažek, J.
155.
DT
Design of warehouse production system
Mudriková, A.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
0 / --
--
156.BTDesign of materials joining in the production of power semiconductor componentsInstitute of Production Technologies (MTF)B-VTVMMTFprohlížet0 / 1--
157.BTDesign of materials joining in the production of power semiconductor componentsInstitute of Production Technologies (MTF)B-VTEMTF0 / 1
--
158.BTDesign of soldering method for ceramic materials
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet
0 / 1
--
159.BTDesign of soldering method for ceramic materialsKoleňák, R.
Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet
0 / 1
--
160.
BTDesign of soldering method for composite materialsKoleňák, R.
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet1 / 1
161.
DT
Proposition of welding technology for Cu-Al transition parts for electrotechnical industry
Marônek, M.Institute of Production Technologies (MTF)
I-ZASM
MTF
1 / 1
Kubisová, D.
162.DTDesign of testing workplace for mechatronic systemBožek, P.Institute of Production Technologies (MTF)
I-PPN
MTF0 / --
--
163.
DT
Design of testing workplace for technical systemInstitute of Production Technologies (MTF)I-VZSMTF2 / 2 Kormúth, F.
Vatrt, M.
164.
BT
Design of workpiece sorting station
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
prohlížet
1 / --
Janček, M.
165.
DT
Design of virtual commissioning for production device model
Department of Production Devices and Systems (UVTE MTF)I-VZS
MTF
1 / 1 Skýpala, R.
166.DTDesign of mold cavity insert for die casting of paddle wheelInstitute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / ----
167.
DTThe proposal of production system on forgings with long axisBílik, J.
Institute of Production Technologies (MTF)
I-VZSMTFprohlížet
0 / 1
--
168.
DT
Design of production and assembly of jig for machining
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet1 / 1 Mozolík, M.
169.
DT
Design the device for handling cylindrical batteries
Institute of Production Technologies (MTF)
I-VZS
MTF1 / 1 Babirát, M.
170.DT
Design of a device for granulate dosing
Institute of Production Technologies (MTF)
I-VZS
MTFprohlížet0 / 1--
171.
BT
Design of device for approximate measurement of tool assembly lengthŠimna, V.Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet0 / --
--
172.
DTDesign of welding jig for welding the steel cap of the Kaiser municipal vehicle tank
Institute of Production Technologies (MTF)
I-VZS
MTFprohlížet1 / -- Remiaš, D.
173.
BT
Design and simulation of tool production in CAD / CAM
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
1 / 1
Kubek, P.
174.
BT
Electronic and ion beam machining - educational video
Institute of Production Technologies (MTF)B-VTE
MTF
prohlížet0 / 1
--
175.
DT
Machining of ceramic material by rotary ultrasonic machining at high cutting speeds
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
176.DTRobot machiningInstitute of Production Technologies (MTF)I-PPN
MTF
0 / --
--
177.
BT
Machinability of materials during laser micromachiningInstitute of Production Technologies (MTF)
B-VTE
MTFprohlížet0 / ----
178.
DT
Resistance to wear during machining
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
Jedinák, M.
179.
DT
Parameters optimisation of stainless steel deposition welding
Bárta, J.Institute of Production Technologies (MTF)
I-ZASM
MTF
1 / 1
180.
DisT
Optimization of CNC conventional metal spinning parameters
Šugárová, J.
Institute of Production Technologies (MTF)
D-STAMMTFprohlížet0 / ----
181.
DT
Optimization of CNC metal spinning proces
Šugárová, J.Institute of Production Technologies (MTF)
I-OAT
MTF
prohlížet1 / 1 Benian, M.
182.
BT
Optimize PMR pneumatic pump consumption to reduce compressed air consumption
Department of Production Devices and Systems (UVTE MTF)
B-VZSMTF
1 / --
183.
DT
Optimization of the technological process of engraving and marking of stainless steel by using of CO2 laser
Necpal, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
1 / 1
Pacalaj, L.
184.DTVerification of hybrid manufacturing systemInstitute of Production Technologies (MTF)I-PPN
MTF
1 / 1
Macháč, T.
185.
DT
Computer aided of cutting fluids monitoring
Institute of Production Technologies (MTF)
I-PPN
MTF2 / -- Vincze, S.
Lašo, M.
186.
BT
Comparison of the CAM strategies in view of surface quality for milling PE1000 materialŠimna, V.
Institute of Production Technologies (MTF)
B-PPT
MTF
1 / --
Cíbik, M.
187.DTComparison of machining by ultrasonic cutting tool with and without ultrasoundKuruc, M.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet1 / 1
188.
BT
Comparison of component manufacturing by injection molding and additive manufacturing from the standoint of dimensional accuracy
Institute of Production Technologies (MTF)
B-PPTMTF1 / --
189.
BT
Comparison of welding performance by arc welding methods
Urminský, J.Department of Welding and Materials Joining (UVTE MTF)
B-VTE
MTF
prohlížet
0 / 1
--
190.DT
Economic evaluation of low batch cast flange production
Šuba, R.
Institute of Production Technologies (MTF)
I-VTVM
MTF
prohlížet
1 / --
Mašek, M.
191.
DTSurface treatment of the components fabricated by additive technologyDepartment of Foundry and Powder Metallurgy (UVTE MTF)
I-VTVM
MTFprohlížet1 / 1 Valovičová, N.
192.DTPrediction of material failure in induction hardening processes using numerical simulationInstitute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / ----
193.
BTCharacteristic of the of the foundry production within two countries of the Visegrád Group (Czech Republic and Republic of Poland)Bajčičák, M.
Institute of Production Technologies (MTF)
B-VTVM
MTF
0 / 1
--
194.
BT
Characteristic of the foundry production within two countries of the Visegrád Group (Slovak Republic and Hungary)
Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet
1 / 1
195.
DT
Computer aided preparation and analysis of ruber compositions propertiesBílik, J.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet1 / 1 Kuril, L.
196.
DT
Process of Internal Complaints in MTA SLOVAKIA s.r.o.Pauliková, A.Institute of Production Technologies (MTF)I-VTVM
MTF
1 / 1 Vicianová, A.
197.
DTProcess of Internal Complaints in Selected Industrial OrganizationInstitute of Production Technologies (MTF)I-VTVM
MTF
1 / 1
Helt, P.
198.
BT
Progressive methods of joining components in assembly using screw connections
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet1 / 1
199.
BT
Advanced manufacturing processes for biomedical parts production
Šugár, P.
Institute of Production Technologies (MTF)
B-VTE
MTF
0 / --
--
200.
DTRationalization of the process of packaging corrugated board products under conditions of Grafobal a.s.Görög, A.
Institute of Production Technologies (MTF)
I-VTVMMTF
1 / 1
201.
DT
Rationalization of the milling production process
Pokorný, P.Institute of Production Technologies (MTF)I-PPNMTFprohlížet1 / 1
202.
DTRationalization of specific component productionInstitute of Production Technologies (MTF)
I-PPN
MTFprohlížet
0 / 2
--
203.
DT
The rationalization of pressed part production in conditions of HP Strojárne, spol. s r. o.Kapustová, M.
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet
1 / 1
Ondrejmiška, D.
204.BTRationalization of the rear lid production on CNC machines
Institute of Production Technologies (MTF)
B-PPT
MTF
1 / 1
205.
BT
The rationalization of drop forging production in conditions of HKS Forge, s.r.o.Kapustová, M.
Institute of Production Technologies (MTF)
B-VTEMTF
0 / 1
--
206.
BT
The rationalization of drop forging production in conditions of HKS Forge, s.r.o.
Kapustová, M.
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet0 / 1--
207.DTThe rationalization of drop forging production in conditions of HKS Forge, s.r.o.Kapustová, M.
Institute of Production Technologies (MTF)
I-PPN
MTF1 / 1 Papp, J.
208.
BT
The rationalization of drop forging production in conditions of HKS Forge, s.r.o.
Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet1 / 1
209.BT
Design of interactive multimedia application for monograph
Božek, P.
Institute of Production Technologies (MTF)
B-VZS
MTF
prohlížet0 / 2
--
210.
BT
Design of interactive multimedia application for monograph
Department of Production Devices and Systems (UVTE MTF)
B-AIA
MTF
prohlížet0 / 2
--
211.
DT
Reverse engineering of rotary cutting tools
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
1 / 1
212.
DT
Reverse engineering of selected component
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet2 / 2 Koleňák, M.
Machala, E.
213.
BT
Reverse modelling in CAD software Fusion 360
Institute of Production Technologies (MTF)B-PPTMTFprohlížet1 / 1 Lederleitner, M.
214.
BT
Control electro-pneumatic circuit of the production equipmentMudriková, A.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
2 / --
Jurák, R.
Štvrtecký, M.
215.DTSolution of S/R screwing joint realization, with focus to the product diversity, for specific working post of rear-wheel-unit assembly line.Zvolenský, R.Department of Production Devices and Systems (UVTE MTF)I-VZSMTF
1 / 1
216.
DT
Robotic gripper for manipulation with the gearbox coverKusá, M.Institute of Production Technologies (MTF)
I-PPN
MTF
1 / --
217.
BT
Rotary ultrasonic machining in medical application
Kuruc, M.Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet1 / 1 Remiš, P.
218.
BT
Sensory equipment of production facilitiesMudriková, A.
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
1 / --
219.DT
Simulation of the workplace process with a collaborative robot with Bizzcom
Matúšová, M.Institute of Production Technologies (MTF)
I-VZS
MTF
prohlížet
1 / 1
Andelek, L.
220.
DTSimulation of robotic workplace for handling operationRužarovský, R.Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTFprohlížet
1 / --
221.
DT
Simulation of robotic workstation for a manipulation-related operation in the company Bizzcom, s.r.o.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / --
Sitta, M.
222.
DT
Simulation of drawing process in DEFORM simulation software
Sobota, R.Institute of Production Technologies (MTF)
I-PPN
MTF
0 / --
--
223.
DT
Simulation techniques and methods in machining
Peterka, J.Institute of Production Technologies (MTF)I-PPNMTFprohlížet1 / -- Čuhák, M.
224.
DisTExamining the durability of cutting toolsPokorný, P.
Institute of Production Technologies (MTF)
D-STAM
MTF
prohlížet
0 / --
--
225.
DT
Observation of selected aspects in turning difficult-to-cut materials with respect to the cutting edge preparationVopát, T.
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
226.
DT
Observation of selected aspects in turning difficult-to-cut materials with respect to the cutting edge preparationVopát, T.
Institute of Production Technologies (MTF)
I-OATMTF0 / 1
--
227.
DT
Electron beam soldering using active solder alloys
Institute of Production Technologies (MTF)
I-ZASMMTFprohlížet
1 / 1
Pluhár, A.
228.
DT
Laser/ultrasound hybrid soldering of ceramic materials
Koleňák, R.
Institute of Production Technologies (MTF)
I-ZASMMTFprohlížet1 / 1 Meluš, T.
229.
BT
Brazing of stainless steels to copper
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet0 / 1--
230.
DisT
Strengthening of the surface of products fabricated by additive technology using laser treatment
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / --
--
231.
DisT
Surface strengthening of the products fabricated by additive technology using thermodiffusion processingČaus, A.
Institute of Production Technologies (MTF)
D-STAMMTF0 / ----
232.
BTClamping methodsInstitute of Production Technologies (MTF)B-PPT
MTF
1 / --
Bíly, J.
233.
BT
Machine tools and cutting tools for rotary ultrasonic machining
Institute of Production Technologies (MTF)B-PPT
MTF
prohlížet1 / 1
234.
BT
Welding parameters monitoring systems of arc welding methods
Marônek, M.Institute of Production Technologies (MTF)B-VTE
MTF
prohlížet1 / 1
235.
BT
Study of solderability of stainless steels to copper
Institute of Production Technologies (MTF)
B-VTEMTF1 / 1 Kopčanová, L.
236.
BTTechnology of inner rail productionPeterka, J.Institute of Production Technologies (MTF)B-PPTMTFprohlížet
0 / --
--
237.BT
Trends in the Production Logistics field: the role of simulation methods and software with special focus on TecnoMatix Plant Simulation
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTFprohlížet1 / -- Vittek, M.
238.
BT
Theoretical study of laser machining processes
Institute of Production Technologies (MTF)
B-VTE
MTF1 / 1 Hollý, L.
239.BT
Theoretical analysis of seamless tubes production processes
Bílik, J.Institute of Production Technologies (MTF)B-VTEMTF1 / 1 Köttner, M.
240.
DT
The influence of laser beam offset on the microstructure and mechanical properties of copper - austenitic stainless steel dissimilar metals weld joints
Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet1 / 1
241.DTTorsional stiffness of shank toolsInstitute of Production Technologies (MTF)
I-PPN
MTF0 / ----
242.
BT
Trends in machining, machine tools and their programming
Pokorný, P.Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet1 / 1
243.
DTKinematics creation and simulation of 3D objects in the program TecnoMatix Plant SimulationDelgado Sobrino, D. R.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / --
Královič, A.
244.
BT
Creating macrosPeterka, J.Institute of Production Technologies (MTF)
B-PPT
MTF
1 / --
Kutej, M.
245.
DT
CMT brazing of steels
Urminský, J.
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
0 / 1
--
246.
DT
Clamping
Peterka, J.Institute of Production Technologies (MTF)I-PPNMTF1 / --
247.DT
Cutting edge preparation and its influence on tool wear
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / 1
--
248.
DT
The edge preparation of cutting tools on the prototype of drag finishing machine
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
1 / 1
249.DT
Cutting edge preparation of the cutting inserts made from CBN
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
1 / 1
Krajči, R.
250.
BT
Variability of rounghness measurement results
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
0 / 1
--
251.
BTVariability of roundness measurement results on round tester
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
252.
BT
Surface texture visualization
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet
0 / 1
--
253.
BT
Step width effect on the position tolerances evaluation measured on CMM.
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
254.
DT
Influence of Al-Li alloy surface roughness on properties of laser beam welded jointsMarônek, M.
Institute of Production Technologies (MTF)
I-ZASM
MTF
1 / 1
255.
BT
Influence of cutting wedge geometry on the roughness profile of the turned surfaceGörög, A.
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet
0 / 1
--
256.
BT
Influence of depth of cut on the roughness profile of the turned surface
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
0 / 1
--
257.
DT
Influence of the density of the internal structure of the FDM process on the dimensional accuracy of the selected component
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet1 / 1
258.BT
Influence of NC paths on the feed rate for milling
Vozár, M.Institute of Production Technologies (MTF)
B-PPT
MTF1 / --
259.
DT
Influence of electron beam oscillation on properties of Al-Li alloy welded joints
Department of Welding and Materials Joining (UVTE MTF)
I-ZASMMTF0 / 1
--
260.
DT
Influence of parameters on dimensional and shape accuracy of components made by FDM method from TPEInstitute of Production Technologies (MTF)
I-PPN
MTFprohlížet
1 / 1
261.DT
Influence of overlaying parameters on forging tool life time after its renovation
Kovaříková, I.
Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet1 / 1
262.BT
Influence of the feed on the roughness profile of the turned surface
Görög, A.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
0 / 1
--
263.BT
Stylus ball diameter effect on the position tolerances evaluation measured on CMM.
Kritikos, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet1 / 1 Bardáč, P.
264.DTInfluence of reverse modelling on quality of 3D modelInstitute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
Kuchárik, J.
265.BT
Influence of the cutting speed on the roughness profile of the turned surface
Görög, A.
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet0 / 1
--
266.
BT
Scanning speed effect on the position tolerances evaluation measured on CMM.
Institute of Production Technologies (MTF)B-PPT
MTF
prohlížet
0 / 1
--
267.
DT
Influence of technological movements of electron beam on properties of welded joints
Urminský, J.Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTFprohlížet0 / 1--
268.
DisT
Influence of heat input and beam oscillation on the properties of dissimilar metals welds produced by electron beam
Institute of Production Technologies (MTF)
D-STAM
MTFprohlížet
0 / --
--
269.DT
Effect of groove face treatment by plasma cutting on selected properties of stainless steel weld joints
Urminský, J.
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTFprohlížet
1 / 1
270.DT
The influence of size of cutting edge microgeometry on the tool wear
Institute of Production Technologies (MTF)
I-OAT
MTF
1 / 1
271.
DT
The influence of cutting edge radius sizes on the surface roughness during the milling
Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / 1
--
272.DT
Influence of the cutting edge radius of the tools on the cutting forces when milling austenitic stainless steel
Institute of Production Technologies (MTF)
I-PPNMTF
0 / 1
--
273.DTMethod of basic alignment effect on the position tolerances evaluation on CMM.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
1 / 1
274.
DT
Porosity evaluation of alluminium parts by Computed Tomography.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet1 / 1
275.DTPorosity evaluation of plastic parts by Computed Tomography.Institute of Production Technologies (MTF)
I-PPN
MTF1 / 1 Sobčák, D.
276.BT
Manufacturing of cutting tools by means of grinding and cutting edge preparation
Institute of Production Technologies (MTF)
B-PPT
MTF
1 / --
277.BTManufacturing of precision holes by Fused Deposition Modeling technologyInstitute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
1 / 1
278.BTProduction of parts through 3D metal printing
Institute of Production Technologies (MTF)
B-PPT
MTF
1 / 1
279.
BT
Manufacture of threadsPeterka, J.Institute of Production Technologies (MTF)
B-PPT
MTF
3 / --
280.
DisT
The research of possibilities of reverse engineering application at plastics moulded parts production and designing and production of moulds
Institute of Production Technologies (MTF)
D-STAMMTFprohlížet
0 / 1
--
281.
DisT
The research of possibilities for application of X-ray at plastic injection moulded parts production and application of 3D measuring devices for moulds manufacturing for thermoplastics injection moulding
Bílik, J.
Institute of Production Technologies (MTF)
D-STAM
MTF
prohlížet
0 / 1
--
282.
DT
Research of fluxless soldering of metal matrix composites using ultrasonic energy
Kostolný, I.
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
0 / 1--
283.
DT
Reasearch of interactions on ceramics/composite soldered joint interface
Kostolný, I.
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTFprohlížet
0 / 1
--
284.DisT
The research of thermoplastics injection moulding using non-conventional methods of mould manufacturing
Bílik, J.Institute of Production Technologies (MTF)D-STAM
MTF
0 / 1
--
285.DisT
Research of components made by additive technologies
Pokorný, P.Institute of Production Technologies (MTF)
D-STAM
MTF
0 / --
--
286.DisTResearch in the development of autonomous pressure sensor setup algorithms in calibration equipment for manufacturing systemsBožek, P.Institute of Production Technologies (MTF)
D-VZAS
MTF
0 / --
--
287.DTStudy of process parameters influence at seamless tubes drawing with aid of numerical simulation
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / --
Masár, P.
288.
DT
Research of selected thermoplastic materials and their influence on the dimensional accuracy of the selected component in the process of Fused Deposition Modeling
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
1 / 1
289.DT
Research of laser beam welding of stainless steel to copper
Institute of Production Technologies (MTF)
I-ZASM
MTF
1 / 1
Harsányiová, J.
290.
DT
Research of electron beam welding of Ni a Ti
Institute of Production Technologies (MTF)I-ZASM
MTF
1 / 1
Škoviera, R.
291.
DisTResearch of weldability of stainless steel and copper by laser beamHodúlová, E.Department of Welding and Materials Joining (UVTE MTF)
D-STM
MTF
0 / --
--
292.
DisT
Research of weldability of stainless steel and copper by laser beam
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / --
--
293.DTHigh Speed MachiningPeterka, J.
Institute of Production Technologies (MTF)
I-PPNMTF
0 / --
--
294.
BT
The creation of application for design and calculation of the gating system for gravity castingBajčičák, M.
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet
0 / 1
--
295.BT
Creation of e-learning modules for innovative education in pneumatic control laboratory
Institute of Production Technologies (MTF)
B-VZS
MTF
1 / 1
296.
DTUtilization of CA technologies for selected shape-complex product
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
2 / --
297.
DT
Utilization of CA technologies in design and production for selected utility equipment
Peterka, J.Institute of Production Technologies (MTF)
I-PPN
MTF1 / --
298.
BT
Utilization of CA technologies in design and production of selected part
Institute of Production Technologies (MTF)
B-PPTMTF
8 / --
Kolibjár, M.
Drmlík, Ľ.
Mazúr, L.
Mejía, A.
Maliarik, O.
Lesay, S.
Rubaninský, N.
Gábriš, A. I.
299.DTUtilization of CA technologies in design of technological robotic workplace
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / --
Repa, R.
300.
BT
Utilizing digital tools of augmented and virtual reality in production factory
Holubek, R.
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
prohlížet1 / -- Pavlík, A.
301.
BT
The use of beam technologies for soldering of stainless steel to copperKovaříková, I.
Institute of Production Technologies (MTF)
B-VTE
MTFprohlížet0 / 1
--
302.
DTUsing modeling and simulation of the machining process to determine the appropriate edge preparation of cutting tools
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
303.
DTModeling and simulation of the machining process in relation to prediction of the tool lifeNecpal, M.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / 1--
304.
DT
The use of computer aided for production and dimensional inspection of gas meter connection in the company Klimstahl s.r.o.
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
305.
BT
Application of soldering technologies for composite and ceramic materials joining in practice
Department of Welding and Materials Joining (UVTE MTF)
B-VTE
MTF
prohlížet
0 / 1
--
306.
BTWelding and brazing of stainless steels to copper in practice
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet0 / 1
--
307.
DT
Virtual commissioning basic elements in the program TecnoMatix Plant Simulation: Design of a methodologyDepartment of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
0 / --
--
308.
DTVirtual commissioning basic elements in the program TecnoMatix Plant Simulation: Case study using a SiL strategyDepartment of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / --
309.
DT
Material flow improvement based on the implementation of a mobile robot in a production line of the company Faurecia s.r.o.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
prohlížet
1 / --
Mihalovič, M.
310.
DT
High-speed steel quality improvement using vacuum technologies of melting and castingDepartment of Foundry and Powder Metallurgy (UVTE MTF)
I-VTVM
MTF
1 / 1 Hutta, V.
311.
DisT
Wettability and interaction of special alloys at heating with electron beamInstitute of Production Technologies (MTF)
D-STAM
MTF0 / --
--
312.
DTChange of tribological properties using laser micro-machining on forming tools in the process of drawing seamless tubesNecpal, M.Institute of Production Technologies (MTF)I-PPNMTFprohlížet0 / 1
--
313.DTReducing the porosity of welded joints made of aluminum alloys using a laser beamBárta, J.
Department of Welding and Materials Joining (UVTE MTF)
I-VTVM
MTF
prohlížet1 / --
314.
DT
Laser beam welding of InconelKovačócy, P.Institute of Production Technologies (MTF)I-VTVM
MTF
prohlížet
1 / 1
315.
DT
Rail welding by Innershield method
Koleňák, R.Institute of Production Technologies (MTF)I-ZASMMTFprohlížet
1 / 1
316.DT
Electron beam welding of copper - stainless steel lap joints
Kovačócy, P.Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet
1 / 1
Gross, J.
317.
DT
Laser beam welding of copper - stainless steel lap joints
Institute of Production Technologies (MTF)
I-ZASM
MTF1 / 1
318.DTWelding of transit gas pipelinesKovačócy, P.
Institute of Production Technologies (MTF)
I-ZASM
MTF
1 / 1
319.
DTForming tools lifetimeInstitute of Production Technologies (MTF)I-OATMTFprohlížet1 / 1 Rusková, A.
320.
DT
5-axis machining
Peterka, J.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet1 / -- Kováč, M.