Summary of topics offered - Institute of Production Technologies (MTF)Help


Application shows list of current and approved topics offered under the selected department or under all its subordinate departments. You can limit the list of topics by the following criteria:

Use the following filter to restrict the displayed records.

Type of thesis:
Programme:
Topic supervisor:
Supervising department:

* | A | B | C | D | E | F | G | H | Ch | I | K | L | M | O | P | R | S | T | U | V | W | X | 5

Ord.Type
Topic
Thesis supervisor
Supervising department
Programme
Intended forDetailsOccupied/Max.Project participants
1.
BT
Additive manufacturing of aluminium alloy components by CMT
Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1
--
2.
DisTAditive manufacturing of components by arc overlay welding methodsMarônek, M.
Institute of Production Technologies (MTF)
D-STAM
MTFprohlížet
0 / --
--
3.
DisT
Aditive manufacturing of components by arc overlay welding methodsMarônek, M.
Institute of Production Technologies (MTF)
D-STAMMTFprohlížet
0 / --
--
4.BTAdditive systems and 3D printing automation
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet0 / 1
--
5.
BTAdditive manufacturing methodsŠugár, P.Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet
0 / --
--
6.
DT
Analysis and improvement of the production performance of a robotic workstation dedicated to the production of measuring devices for the BK polymerDepartment of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
0 / ----
7.
DT
Factors of the Working Environment Analysis of the Center of Excellence 5-Axis Machining CE5AM MTF STU
Pauliková, A.Institute of Production Technologies (MTF)I-VTVM
MTF
1 / 1 Mužíková, V.
8.
BT
Material rest analyse for grinding process of synchronous ringHrušková, E.
Institute of Production Technologies (MTF)
B-VZS
MTF0 / --
--
9.
BT
Analysis of the laser beam welding method of stainless steel to copper
Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1
--
10.
BT
Analysis of the electron beam welding method of stainless steel to copper
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet
1 / 1
Konevalik, F.
11.
DTAnalysis of the microstructure and mechanical properties of components produced with wire arc additive manufacturing
Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet0 / 1--
12.
DT
Analysis of part production possibilities of under conditions of KONŠTRUKTA - TireTech, a. s.
Institute of Production Technologies (MTF)
I-VTVM
MTF
0 / --
--
13.DT
Analysis of stress-strain states on film-substrate interface using numerical simulation
Behúlová, M.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / --
--
14.
DTAnalysis of the deployment of multipurpose assembly and otherones equipments into the production process at BOGE at BOGE Elastmetall Slovakia a.s. TrnavaHolubek, R.Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / -- Čulík, M.
15.BT
The light metal alloy forming processes analysis
Institute of Production Technologies (MTF)
B-VTVM
MTF0 / 1
--
16.
DT
Analysis of dimensional stability of components made of powder mixtures during the heat treatment
Behúlová, M.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / --
--
17.
BT
Analysis of technological possibilities for joining ceramics with composite material
Kostolný, I.Department of Welding and Materials Joining (UVTE MTF)B-VTEMTF0 / 1--
18.
DT
Influence of heat treatment of a component on dimensional accuracy.Moravčíková, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
19.
DT
Analysis of production activity of automatic line in conditions of ŠVEC a SPOL, s.r.o.
Görög, A.
Institute of Production Technologies (MTF)
I-VTVM
MTF0 / --
--
20.
BT
Surfaces analysing on rotary cutting tools
Buranský, I.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
0 / 2
--
21.
DisT
The application of additive techniques for design and manufacturing of moulded parts and moulds for thermoplastics injection moulding
Bílik, J.Institute of Production Technologies (MTF)
D-STAM
MTFprohlížet0 / 1
--
22.
DT
Application of laser surface texturing in forming processes
Šugárová, J.Institute of Production Technologies (MTF)
I-OAT
MTFprohlížet0 / 1--
23.BT
Application of tailored blanks technology in automotive industry
Institute of Production Technologies (MTF)B-VTEMTFprohlížet0 / 1--
24.BT
Automation of control equipment
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
prohlížet0 / ----
25.
DT
Automate assembly and drawing creation with PTC Creo Parametric CAD softwareKošťál, P.Institute of Production Technologies (MTF)
I-VZS
MTF0 / 1--
26.
DT
Automated design of technological processesPeterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTF0 / ----
27.
DT
Balancing of cutting tools
Peterka, J.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / --
--
28.
BTFinishing of complex shaped parts made of alloy EN AW-5754 H111Institute of Production Technologies (MTF)B-PPTMTF0 / 1--
29.DT
Surface roughness
Peterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
0 / --
--
30.
BT
Economical estimate of low batch cast frame production
Institute of Production Technologies (MTF)
B-VTVMMTFprohlížet0 / --
--
31.DT
Filtration of data for surface roughness measurement
Institute of Production Technologies (MTF)
I-OAT
MTF
prohlížet
0 / 1
--
32.
DT
Milling with modified tool radius
Peterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / 1
--
33.
DT
The milling of difficult-to-cut materials
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / 1--
34.BTGeometry of cutting toolsPokorný, P.Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
0 / 1
--
35.
BT
Chemical and electrochemical machining - educational videoInstitute of Production Technologies (MTF)B-VTE
MTF
0 / 1--
36.
BT
Cooling during synchronous rings grinding
Institute of Production Technologies (MTF)B-VTEMTFprohlížet
0 / 1
--
37.
DT
Design of a robotic workstation for calibration bearings
Institute of Production Technologies (MTF)
I-PPNMTF1 / -- Švančara, P.
38.DTDesign of a robotic workstation for calibration bearingsBožek, P.
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / --
--
39.
DTImplementation of object camera recognition capabilities into a trainning robotic station using an IRB 120 robotInstitute of Production Technologies (MTF)I-VZSMTFprohlížet0 / 1--
40.DT
Implementation of augmented reality in assembly line production
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / 1--
41.
BT
Incremental forming processes
Institute of Production Technologies (MTF)
B-VTEMTF1 / 1
42.
DisTIncremental sheet metal forming of laser welded blanksŠugárová, J.
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / 1
--
43.
DT
Innovation of material flow on assembly line in MTA Slovakia s.r.o.Matúšová, M.
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / 1
--
44.
DisTInteraction of solder at application of an active ultrasound
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / --
--
45.
DT
Complex measurement of selected pars in the GOM Inspect softwareMilde, J.Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1--
46.BTComputer aided design of injection molding toolsBílik, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1
--
47.DTComputer aided design of mould on injection moulding
Institute of Production Technologies (MTF)
I-PPN
MTF0 / 1
--
48.
BTDesign of injection moulding tool on termoplasticBílik, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1
--
49.DTComputer aided design of tool on set productionBílik, J.
Institute of Production Technologies (MTF)
I-PPN
MTF0 / 1--
50.BTForming tool design on bending
Institute of Production Technologies (MTF)
B-PPTMTF1 / 1
51.
BT
Engineering design of the fixture for a specific clamping system
Institute of Production Technologies (MTF)
B-VZSMTF
0 / --
--
52.BTDesign of the jig extending the possibilities of clamping rotating parts to the HZG4 Diffractometer
Institute of Production Technologies (MTF)
B-VZSMTF0 / ----
53.BT
Control of surface profile and microgeometry
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet0 / 1--
54.BTLaser polishing
Institute of Production Technologies (MTF)
B-VTEMTF
0 / --
--
55.BTLaser machining of biocompatible materials
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet
1 / 1
56.
BT
Laser machining of PM processed titanium composite
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet
1 / 1
Kamhal, J.
57.
DT
Material flow of the production systemMudriková, A.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF0 / --
--
58.
DT
Temperature measurement during machiningPeterka, J.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet0 / --
--
59.
BT
Measurement of a selected part by optical 3D scanner
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet0 / 1
--
60.
DTModeling and numerical simulation of laser welding processes in keyhole modeBehúlová, M.Institute of Production Technologies (MTF)I-PPNMTF
0 / --
--
61.DisTModeling and numerical simulation of the production of dissimilar weld joints by concentrated energy sourcesInstitute of Production Technologies (MTF)D-PMMDxA
D-PMMD
D-STAM
MTF0 / --
--
62.
DTModeling and simulation of technological process of forming at production of tubes with contoured internal surfaceNecpal, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / 1
--
63.
DisT
Modeling of machined surfaces based on physical causes of their origin
Görög, A.
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / --
--
64.
BT
Part modelling by generative design
Buranský, I.Institute of Production Technologies (MTF)B-PPT
MTF
0 / 1--
65.
DTModelling of special cutting toolsBuranský, I.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / 1
--
66.BTThe modernization of forging line with forging press LZK 4000 in conditions of HKS Forge, s.r.o.
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet1 / 1 Kulíšek, P.
67.
BT
The modernization of forging line with forging press LZK 4000 in conditions of HKS Forge, s.r.o.
Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet0 / 1
--
68.
DisT
Modification of the tribological properties of the active parts of tools
Šugárová, J.Institute of Production Technologies (MTF)D-STAM
MTF
0 / 1--
69.DT
Design and production of injection moulding tools with aditives technologies utilization
Bílik, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / 1--
70.BT
Possibilities of material flow design
Mudriková, A.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
1 / --
71.BT
The abilities of forming tools surfaces improvement
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet
0 / 1
--
72.BTPossibilities of using the education robot Dobot Magician
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF0 / ----
73.
BT
Replacement of aluminum carbide tools coated with ALCrN with FeinAl
Matúšová, M.
Institute of Production Technologies (MTF)
B-VZSMTF0 / 1
--
74.
DT
Design and implementation of extending components of positioning fixture.Moravčíková, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / 1
--
75.
DT
Design and implementation of supply system for assembly equipment
Božek, P.
Department of Production Devices and Systems (UVTE MTF)
I-AIPP
MTF0 / 1
--
76.BTDesign and realization of interactive multimedia application for subject Designing of production systems
Institute of Production Technologies (MTF)
B-VZSMTFprohlížet
0 / 2
--
77.
DT
Design and simulation of robotic workplace for automobile body welding
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
78.
DT
Design and production of hybrid manufacturing systems
Morovič, L.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / 1
--
79.
DT
Design and manufacturing of gearbox for drag equipment
Institute of Production Technologies (MTF)I-PPNMTF0 / 1--
80.
BT
Design and manufacturing of preparation for tube forming
Kuruc, M.
Department of Machining and Computer-aided Technologies (UVTE MTF)
B-PPTMTF
0 / 1
--
81.
DT
Design and production of parts using 3D metal printing
Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / 1
--
82.BT
Design and production of education model for the course Fixtures
Institute of Production Technologies (MTF)B-VZSMTFprohlížet0 / --
--
83.
BT
Design and creation of solid carbide mill model in CAD software
Vozár, M.Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
0 / --
--
84.
DT
Design and development of universal gripper for handling plastic products in BOGE Elastmetall Slovakia a.s., Trnava
Institute of Production Technologies (MTF)
I-VZS
MTF
1 / 1 Petrík, P.
85.
DT
Design and development of universal gripping system for headlights
Institute of Production Technologies (MTF)
I-VZS
MTFprohlížet
0 / 1
--
86.
BTDesign and assembly of fuel tank for SCR systemInstitute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1
--
87.
DTDesign and simulation of automated workplace for welding of stampingsInstitute of Production Technologies (MTF)
I-VZS
MTF
0 / 1
--
88.
DT
Design of automation for synchronous ring orientation in packaging at Schaeffler s.r.o.
Institute of Production Technologies (MTF)
I-VZS
MTF0 / 1
--
89.
DT
Design of automation for damage detection at synchronous ring packing
Hrušková, E.
Institute of Production Technologies (MTF)
I-VZS
MTF
prohlížet
0 / --
--
90.
BT
Automation process design of manual workplace
Michal, D.Institute of Production Technologies (MTF)
B-VZS
MTF
0 / 1
--
91.
DT
Design of an automated workplace in the environment of Process Simulate software use in virtual realityHolubek, R.Department of Production Devices and Systems (UVTE MTF)I-VZS
MTF
prohlížet0 / --
--
92.
DT
Design of autonomous solution of moving and pressing head of inner ring with inclined transport plane using 3D printKusá, M.
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / --
--
93.
DT
Design and manufacturing parts for drag finishing machine
Buranský, I.Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
0 / --
--
94.
DT
Design and production of clamping modular system componentsMoravčíková, J.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / 1
--
95.
BT
Design of electric melting furnace for copper alloys
Institute of Production Technologies (MTF)
B-VTE
MTF0 / --
--
96.
DT
Design of geometry and tool manufacturing for technological process of forming at production of tubes with contoured internal surfaceNecpal, M.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / 1
--
97.BTDesign of coreboxes for sand mould for cast ship engine block production
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / --
--
98.
BT
Design of measurement of small diameter screw thread parameters
Moravčíková, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1--
99.
BT
Design of clamping modular system components
Moravčíková, J.Institute of Production Technologies (MTF)B-PPT
MTF
0 / 1
--
100.
DT
Concept design of automation measurement of the pitch circle at cylindrical bearing
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / ----
101.BTDesign of measurement of internal thread parametersInstitute of Production Technologies (MTF)
B-PPT
MTFprohlížet1 / 1
102.
BTDesign of measurement of internal thread parametersMoravčíková, J.
Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1
--
103.
DT
Design of mathematical model of butt weld joint made of stainless steel and copper by laser beam
Institute of Production Technologies (MTF)
I-ZASM
MTF
0 / 1--
104.DT
Design of a measurement plan for measuring a particular component on a coordinate measuring machine
Görög, A.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / 2
--
105.
BT
Creating a measurement plan in CalypsoGörögová, I.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 2
--
106.BTDesign of measurement of small diameter screw thread parameters
Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1
--
107.
BT
Proposal of joining methods of rotary segments
Kovačócy, P.
Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet
0 / 1
--
108.
BTDesign of the method for decision support in the area of corrective maintenanceHrušková, E.
Institute of Production Technologies (MTF)
B-VZS
MTF
prohlížet0 / --
--
109.DisT
Methodology design for designing assembly workstations and systems
Institute of Production Technologies (MTF)D-VZAS
MTF
prohlížet
0 / 2
--
110.
DisT
Design of methodology for projecting of the robotic workstations in Industry 4.0 concept
Institute of Production Technologies (MTF)
D-VZAS
MTF
0 / --
--
111.DisT
Proposal of methodology for the rationalization of assembly workplaces and systems
Václav, Š.
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / 2
--
112.
DisT
Proposal of methodology of creation of digital twin and virtual commissioning of production systemRužarovský, R.Institute of Production Technologies (MTF)D-VZASMTF
0 / 1
--
113.
DT
Proposal of welding method and equipment for welding of aluminium componentsKovačócy, P.Institute of Production Technologies (MTF)I-VTVMMTFprohlížet
0 / 1
--
114.
DT
Proposal of welding method and equipment for welding of flanges
Institute of Production Technologies (MTF)
I-VTVM
MTFprohlížet0 / 1
--
115.
DT
Design of mobile workplace with collaborative robot UR for manipulation with plastic products at BOGE Elastmetall Slovakia a.s., Trnava
Institute of Production Technologies (MTF)I-VZS
MTF
prohlížet1 / 1 Balogh, M.
116.
DT
Design of mobile equipment for inspection of piping systems
Bučányová, M.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
prohlížet
0 / 1
--
117.DT
The design of pattern plates for the DISAMATIC D3 Vertical Moulding Machine
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / ----
118.
DTDesign of the glass mold and influence of proposed renovation technologies on its durability in manufacturingKovaříková, I.
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1--
119.
DTDesign of production line module with assembly robotKošťál, P.Institute of Production Technologies (MTF)
I-VZS
MTFprohlížet0 / 1
--
120.BT
Design of production line module with assembly robot
Košťál, P.Institute of Production Technologies (MTF)B-VZS
MTF
0 / 1
--
121.DTDesign assembly of cable harnessesInstitute of Production Technologies (MTF)
I-VZS
MTF
prohlížet
0 / 1
--
122.
BT
Design of the assembly process for the short-barrelled firearm Glock 26Delgado Sobrino, D. R.Department of Production Devices and Systems (UVTE MTF)
B-PPT
MTFprohlížet
0 / --
--
123.
BT
Design of passenger car engine assemblyVáclav, Š.
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet
0 / 1
--
124.BT
Design of piping assembly
Václav, Š.
Institute of Production Technologies (MTF)
B-VZSMTF0 / 1
--
125.BT
Design of assembly of robotic arm
Václav, Š.
Institute of Production Technologies (MTF)
B-PPTMTF0 / 1--
126.
BT
Design of assembly of central bicycle compositionVáclav, Š.
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1--
127.
BT
Design of roller conveyor assembly
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
128.DT
Design of assembly of injection molding machines
Václav, Š.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / 1
--
129.BTDesign of assembly procedure for grape harvesting equipment
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1--
130.
DTAnalysis of the deployment of multipurpose assembly and otherones equipments into the production process at BOGE at BOGE Elastmetall Slovakia a.s.TrnavaHolubek, R.Department of Production Devices and Systems (UVTE MTF)I-VZS
MTF
0 / --
--
131.
BT
Design of sand mould for cast pin connector
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet0 / ----
132.DT
Design of a new layout and material flow conception due to the purposes of production expansion in the production line ZM-MAG of the production plant ZF Slovakia, a.s. Trnava
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTFprohlížet
0 / --
--
133.
BT
Proposal of improved maintenance of quenching line in Schaeffler Skalica, spol. s r.o.
Institute of Production Technologies (MTF)
B-VTVM
MTF
1 / --
134.DTDesign of a dressing tool for grinding wheel in the internal grinding machineBučányová, M.Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / --
135.
DT
Design of parameters for CBN machining and their influence on selected characteristics
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
136.
DT
Design of welding parameters for laser welding of Ni and Ti
Kovaříková, I.Institute of Production Technologies (MTF)I-ZASMMTFprohlížet0 / 1
--
137.
BT
Design of belt conveyor for bulk materialsInstitute of Production Technologies (MTF)
B-VZS
MTF
prohlížet
0 / 1
--
138.
BT
Design of pneumatic grasping device
Ružarovský, R.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF0 / 1--
139.
BTDesign of pneumatic clamping device
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
prohlížet
0 / 1
--
140.
BTProposal of tank hull replica production processŠuba, R.
Institute of Production Technologies (MTF)
B-VTEMTFprohlížet
0 / --
--
141.
BT
Proposal of tank turret replica production processInstitute of Production Technologies (MTF)
B-VTE
MTFprohlížet
0 / --
--
142.
BT
xxxx
Institute of Production Technologies (MTF)
B-VZSMTFprohlížet
0 / 1
--
143.
DT
Design of the workplace with collaborative robot for the CNC machine tending
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1--
144.BT
Design of the tool for bearing pressing into the bicycle frames
Šimna, V.
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet0 / 1--
145.
DT
Design of jig for assembly of sub-groups of timber houses
Institute of Production Technologies (MTF)
I-VZS
MTF
prohlížet0 / 1
--
146.
DT
Design of the tool for machining damaged sealing surfaces of steam generator in NPP type VVER 440
Bučányová, M.
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
0 / 1
--
147.DT
Proposal of rationalization measures in ZF Levice
Václav, Š.
Institute of Production Technologies (MTF)
I-VTVMMTFprohlížet0 / 1--
148.BTDesign of cutting tool in CAD software using measured geometryHrbál, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
149.
BT
Design of production device control via PLC Allen Bradley
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTFprohlížet0 / 1
--
150.DT
Design of robotic workstation for the station of the output control of direction indicators
Department of Production Devices and Systems (UVTE MTF)I-VZSMTF
0 / --
--
151.
BT
Design of robotic armInstitute of Production Technologies (MTF)
B-VZS
MTFprohlížet
0 / 1
--
152.
DT
Design of production cell robotization for bonding processDepartment of Production Devices and Systems (UVTE MTF)I-VZSMTFprohlížet
0 / 1
--
153.
BTDesign of robotized workplace in RobotStudio simulation softwareDepartment of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
0 / --
--
154.
DT
Design of iCIM 3000 input-output position expansion in Process Simulate software
Department of Production Devices and Systems (UVTE MTF)I-VZSMTFprohlížet0 / --
--
155.
DTDesign of warehouse production systemDepartment of Production Devices and Systems (UVTE MTF)
I-VZS
MTFprohlížet0 / ----
156.
BT
Design of materials joining in the production of power semiconductor components
Koleňák, R.Institute of Production Technologies (MTF)B-VTEMTF0 / 1--
157.
BTDesign of materials joining in the production of power semiconductor componentsKoleňák, R.
Institute of Production Technologies (MTF)
B-VTVM
MTF
prohlížet
0 / 1
--
158.BTDesign of soldering method for ceramic materialsKoleňák, R.Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1
--
159.
BT
Design of soldering method for ceramic materialsKoleňák, R.
Institute of Production Technologies (MTF)
B-VTVMMTFprohlížet0 / 1
--
160.BT
Design of soldering method for composite materials
Koleňák, R.Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1
--
161.DT
Proposition of welding technology for Cu-Al transition parts for electrotechnical industry
Institute of Production Technologies (MTF)I-ZASM
MTF
prohlížet
0 / 1
--
162.
DT
Design of testing workplace for mechatronic systemInstitute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / ----
163.DTDesign of testing workplace for technical systemInstitute of Production Technologies (MTF)I-VZSMTFprohlížet1 / 2 Vatrt, M.
164.BT
Design of workpiece sorting station
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
0 / --
--
165.
DT
Design of virtual commissioning for production device model
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTFprohlížet
0 / 1
--
166.
DT
Design of mold cavity insert for die casting of paddle wheelBajčičák, M.
Institute of Production Technologies (MTF)
I-PPN
MTF0 / ----
167.
DT
The proposal of production system on forgings with long axis
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / 1
--
168.DT
Design of production and assembly of jig for machining
Václav, Š.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / 1
--
169.
DT
Design the device for handling cylindrical batteries
Institute of Production Technologies (MTF)
I-VZSMTFprohlížet
1 / 1
170.DTDesign of a device for granulate dosing
Institute of Production Technologies (MTF)
I-VZS
MTF
0 / 1
--
171.BTDesign of device for approximate measurement of tool assembly lengthŠimna, V.Institute of Production Technologies (MTF)B-PPTMTFprohlížet0 / ----
172.
DTDesign of welding jig for welding the steel cap of the Kaiser municipal vehicle tankKusá, M.Institute of Production Technologies (MTF)
I-VZS
MTFprohlížet
0 / --
--
173.
BT
Design and simulation of tool production in CAD / CAM
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
174.
BT
Electronic and ion beam machining - educational video
Görögová, I.Institute of Production Technologies (MTF)
B-VTE
MTF
0 / 1
--
175.
DT
Machining of ceramic material by rotary ultrasonic machining at high cutting speeds
Kuruc, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
176.
DT
Robot machining
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / ----
177.
BT
Machinability of materials during laser micromachining
Institute of Production Technologies (MTF)B-VTEMTF0 / --
--
178.
DT
Resistance to wear during machining
Pokorný, P.Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
179.
DT
Parameters optimisation of stainless steel deposition welding
Bárta, J.
Institute of Production Technologies (MTF)
I-ZASM
MTFprohlížet
1 / 1
180.DisT
Optimization of CNC conventional metal spinning parameters
Institute of Production Technologies (MTF)D-STAMMTFprohlížet
0 / --
--
181.
DTOptimization of CNC metal spinning procesInstitute of Production Technologies (MTF)I-OAT
MTF
prohlížet1 / 1
182.
BT
Optimize PMR pneumatic pump consumption to reduce compressed air consumptionMudriková, A.Department of Production Devices and Systems (UVTE MTF)B-VZSMTF
0 / --
--
183.
DT
Optimization of the technological process of engraving and marking of stainless steel by using of CO2 laserNecpal, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
184.
DT
Verification of hybrid manufacturing system
Institute of Production Technologies (MTF)I-PPN
MTF
0 / 1
--
185.
DT
Computer aided of cutting fluids monitoringPeterka, J.Institute of Production Technologies (MTF)I-PPNMTF0 / ----
186.
BT
Comparison of the CAM strategies in view of surface quality for milling PE1000 material
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet0 / ----
187.
DTComparison of machining by ultrasonic cutting tool with and without ultrasoundKuruc, M.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1--
188.
BT
Comparison of component manufacturing by injection molding and additive manufacturing from the standoint of dimensional accuracy
Institute of Production Technologies (MTF)
B-PPT
MTF
1 / -- Ivanovič, R.
189.
BT
Comparison of welding performance by arc welding methods
Department of Welding and Materials Joining (UVTE MTF)B-VTE
MTF
prohlížet
0 / 1
--
190.
DT
Economic evaluation of low batch cast flange productionŠuba, R.Institute of Production Technologies (MTF)
I-VTVM
MTFprohlížet
1 / --
Mašek, M.
191.
DT
Surface treatment of the components fabricated by additive technology
Department of Foundry and Powder Metallurgy (UVTE MTF)
I-VTVMMTF
1 / 1
Valovičová, N.
192.
DT
Prediction of material failure in induction hardening processes using numerical simulationBehúlová, M.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / --
--
193.
BT
Characteristic of the of the foundry production within two countries of the Visegrád Group (Czech Republic and Republic of Poland)
Institute of Production Technologies (MTF)
B-VTVM
MTFprohlížet0 / 1
--
194.
BT
Characteristic of the foundry production within two countries of the Visegrád Group (Slovak Republic and Hungary)
Institute of Production Technologies (MTF)
B-VTVM
MTF
1 / 1
195.
DT
Computer aided preparation and analysis of ruber compositions properties
Institute of Production Technologies (MTF)
I-PPNMTF
0 / 1
--
196.
DT
Process of Internal Complaints in MTA SLOVAKIA s.r.o.Pauliková, A.
Institute of Production Technologies (MTF)
I-VTVMMTF
0 / 1
--
197.
DTProcess of Internal Complaints in Selected Industrial Organization
Institute of Production Technologies (MTF)
I-VTVM
MTF
prohlížet
0 / 1
--
198.BT
Progressive methods of joining components in assembly using screw connections
Václav, Š.
Institute of Production Technologies (MTF)
B-PPTMTF0 / 1
--
199.
BT
Advanced manufacturing processes for biomedical parts productionŠugár, P.Institute of Production Technologies (MTF)B-VTEMTFprohlížet0 / ----
200.
DT
Rationalization of the process of packaging corrugated board products under conditions of Grafobal a.s.
Institute of Production Technologies (MTF)I-VTVMMTF0 / 1
--
201.DTRationalization of the milling production processPokorný, P.Institute of Production Technologies (MTF)I-PPNMTF0 / 1--
202.
DT
Rationalization of specific component productionGörög, A.
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet
0 / 2
--
203.DT
The rationalization of pressed part production in conditions of HP Strojárne, spol. s r. o.
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
204.
BT
Rationalization of the rear lid production on CNC machinesGörög, A.
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet0 / 1
--
205.BTThe rationalization of drop forging production in conditions of HKS Forge, s.r.o.
Institute of Production Technologies (MTF)
B-VTE
MTF0 / 1--
206.
BT
The rationalization of drop forging production in conditions of HKS Forge, s.r.o.Kapustová, M.Institute of Production Technologies (MTF)B-PPTMTF
0 / 1
--
207.
DT
The rationalization of drop forging production in conditions of HKS Forge, s.r.o.
Kapustová, M.
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet
0 / 1
--
208.
BT
The rationalization of drop forging production in conditions of HKS Forge, s.r.o.
Institute of Production Technologies (MTF)
B-VTVMMTFprohlížet0 / 1
--
209.
BT
Design of interactive multimedia application for monograph
Department of Production Devices and Systems (UVTE MTF)
B-AIA
MTF
prohlížet
0 / 2
--
210.BT
Design of interactive multimedia application for monograph
Institute of Production Technologies (MTF)
B-VZS
MTFprohlížet0 / 2--
211.DT
Reverse engineering of rotary cutting tools
Buranský, I.Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1--
212.
DT
Reverse engineering of selected component
Milde, J.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet0 / 2
--
213.
BT
Reverse modelling in CAD software Fusion 360
Buranský, I.
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
214.
BT
Control electro-pneumatic circuit of the production equipment
Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
1 / --
215.
DT
Solution of S/R screwing joint realization, with focus to the product diversity, for specific working post of rear-wheel-unit assembly line.
Zvolenský, R.
Department of Production Devices and Systems (UVTE MTF)
I-VZSMTF
0 / 1
--
216.
DT
Robotic gripper for manipulation with the gearbox coverKusá, M.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / ----
217.BTRotary ultrasonic machining in medical applicationKuruc, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
218.
BT
Sensory equipment of production facilities
Mudriková, A.Department of Production Devices and Systems (UVTE MTF)B-VZS
MTF
prohlížet0 / ----
219.DTSimulation of the workplace process with a collaborative robot with BizzcomMatúšová, M.
Institute of Production Technologies (MTF)
I-VZS
MTF
prohlížet0 / 1
--
220.
DT
Simulation of robotic workplace for handling operation
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
0 / ----
221.DTSimulation of robotic workstation for a manipulation-related operation in the company Bizzcom, s.r.o.
Department of Production Devices and Systems (UVTE MTF)
I-VZSMTF
1 / --
222.
DT
Simulation of drawing process in DEFORM simulation software
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / --
--
223.
DT
Simulation techniques and methods in machiningPeterka, J.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet
0 / --
--
224.
DisT
Examining the durability of cutting toolsPokorný, P.Institute of Production Technologies (MTF)
D-STAM
MTFprohlížet
0 / --
--
225.DT
Observation of selected aspects in turning difficult-to-cut materials with respect to the cutting edge preparation
Vopát, T.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet
0 / 1
--
226.DT
Observation of selected aspects in turning difficult-to-cut materials with respect to the cutting edge preparation
Institute of Production Technologies (MTF)
I-OAT
MTF
0 / 1
--
227.
DTElectron beam soldering using active solder alloysKoleňák, R.Institute of Production Technologies (MTF)I-ZASMMTFprohlížet0 / 1--
228.DT
Laser/ultrasound hybrid soldering of ceramic materials
Institute of Production Technologies (MTF)I-ZASM
MTF
0 / 1
--
229.
BT
Brazing of stainless steels to copper
Institute of Production Technologies (MTF)
B-VTE
MTFprohlížet
0 / 1
--
230.
DisTStrengthening of the surface of products fabricated by additive technology using laser treatmentČaus, A.
Institute of Production Technologies (MTF)
D-STAM
MTF
0 / --
--
231.DisTSurface strengthening of the products fabricated by additive technology using thermodiffusion processing
Institute of Production Technologies (MTF)
D-STAM
MTFprohlížet
0 / --
--
232.
BT
Clamping methods
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / --
--
233.
BT
Machine tools and cutting tools for rotary ultrasonic machiningKuruc, M.Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1
--
234.
BT
Welding parameters monitoring systems of arc welding methodsMarônek, M.Institute of Production Technologies (MTF)B-VTEMTFprohlížet
0 / 1
--
235.BT
Study of solderability of stainless steels to copper
Hodúlová, E.Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet0 / 1--
236.
BT
Technology of inner rail production
Peterka, J.Institute of Production Technologies (MTF)B-PPT
MTF
0 / --
--
237.BTTrends in the Production Logistics field: the role of simulation methods and software with special focus on TecnoMatix Plant SimulationDelgado Sobrino, D. R.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
0 / --
--
238.BT
Theoretical study of laser machining processes
Ludrovcová, B.Institute of Production Technologies (MTF)B-VTE
MTF
prohlížet0 / 1
--
239.
BT
Theoretical analysis of seamless tubes production processes
Bílik, J.Institute of Production Technologies (MTF)
B-VTE
MTFprohlížet
0 / 1
--
240.
DT
The influence of laser beam offset on the microstructure and mechanical properties of copper - austenitic stainless steel dissimilar metals weld joints
Institute of Production Technologies (MTF)
I-ZASM
MTF
0 / 1--
241.DTTorsional stiffness of shank toolsPeterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / ----
242.
BT
Trends in machining, machine tools and their programming
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet
0 / 1
--
243.
DT
Kinematics creation and simulation of 3D objects in the program TecnoMatix Plant Simulation
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
1 / --
244.
BTCreating macros
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / ----
245.
DT
CMT brazing of steels
Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
prohlížet
0 / 1
--
246.DT
Clamping
Peterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
1 / --
247.
DT
Cutting edge preparation and its influence on tool wear
Šimna, V.Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
248.DT
The edge preparation of cutting tools on the prototype of drag finishing machine
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
249.
DT
Cutting edge preparation of the cutting inserts made from CBN
Institute of Production Technologies (MTF)
I-PPN
MTF0 / 1--
250.BT
Variability of rounghness measurement results
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
251.BT
Variability of roundness measurement results on round tester
Institute of Production Technologies (MTF)B-PPT
MTF
0 / 1
--
252.BT
Surface texture visualization
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
253.
BT
Step width effect on the position tolerances evaluation measured on CMM.
Institute of Production Technologies (MTF)
B-PPT
MTF0 / 1--
254.
DT
Influence of Al-Li alloy surface roughness on properties of laser beam welded jointsMarônek, M.
Institute of Production Technologies (MTF)
I-ZASM
MTF
0 / 1
--
255.
BT
Influence of cutting wedge geometry on the roughness profile of the turned surfaceInstitute of Production Technologies (MTF)
B-PPT
MTF
prohlížet0 / 1
--
256.
BT
Influence of depth of cut on the roughness profile of the turned surface
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
0 / 1
--
257.
DT
Influence of the density of the internal structure of the FDM process on the dimensional accuracy of the selected component
Milde, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
1 / 1
258.
BT
Influence of NC paths on the feed rate for millingVozár, M.Institute of Production Technologies (MTF)
B-PPT
MTF
0 / ----
259.
DT
Influence of electron beam oscillation on properties of Al-Li alloy welded joints
Urminský, J.Department of Welding and Materials Joining (UVTE MTF)I-ZASMMTF
0 / 1
--
260.
DT
Influence of parameters on dimensional and shape accuracy of components made by FDM method from TPE
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1--
261.
DT
Influence of overlaying parameters on forging tool life time after its renovation
Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet0 / 1
--
262.
BT
Influence of the feed on the roughness profile of the turned surface
Institute of Production Technologies (MTF)
B-PPT
MTF
prohlížet
0 / 1
--
263.
BT
Stylus ball diameter effect on the position tolerances evaluation measured on CMM.
Kritikos, M.
Institute of Production Technologies (MTF)
B-PPT
MTF
0 / 1
--
264.DT
Influence of reverse modelling on quality of 3D model
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
265.
BT
Influence of the cutting speed on the roughness profile of the turned surfaceGörög, A.Institute of Production Technologies (MTF)
B-PPT
MTF0 / 1
--
266.BTScanning speed effect on the position tolerances evaluation measured on CMM.Kritikos, M.Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
0 / 1
--
267.DTInfluence of technological movements of electron beam on properties of welded jointsUrminský, J.Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
0 / 1--
268.DisTInfluence of heat input and beam oscillation on the properties of dissimilar metals welds produced by electron beamInstitute of Production Technologies (MTF)D-STAMMTF0 / --
--
269.
DT
Effect of groove face treatment by plasma cutting on selected properties of stainless steel weld joints
Urminský, J.Department of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTF
1 / 1
Nyeki, N. A.
270.DTThe influence of size of cutting edge microgeometry on the tool wearInstitute of Production Technologies (MTF)
I-OAT
MTFprohlížet
0 / 1
--
271.
DT
The influence of cutting edge radius sizes on the surface roughness during the milling
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1
--
272.DT
Influence of the cutting edge radius of the tools on the cutting forces when milling austenitic stainless steel
Šimna, V.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1
--
273.DT
Method of basic alignment effect on the position tolerances evaluation on CMM.
Kritikos, M.
Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
1 / 1
Molnár, M.
274.
DT
Porosity evaluation of alluminium parts by Computed Tomography.Kritikos, M.Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet0 / 1
--
275.
DT
Porosity evaluation of plastic parts by Computed Tomography.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet1 / 1 Sobčák, D.
276.
BT
Manufacturing of cutting tools by means of grinding and cutting edge preparation
Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet0 / ----
277.
BT
Manufacturing of precision holes by Fused Deposition Modeling technology
Milde, J.
Institute of Production Technologies (MTF)
B-PPTMTF0 / 1
--
278.
BT
Production of parts through 3D metal printing
Institute of Production Technologies (MTF)
B-PPTMTFprohlížet
0 / 1
--
279.
BT
Manufacture of threads
Peterka, J.
Institute of Production Technologies (MTF)
B-PPT
MTF
2 / -- Chovanec, M.
Bučko, B.
280.
DisT
The research of possibilities of reverse engineering application at plastics moulded parts production and designing and production of moulds
Institute of Production Technologies (MTF)
D-STAMMTFprohlížet0 / 1
--
281.DisT
The research of possibilities for application of X-ray at plastic injection moulded parts production and application of 3D measuring devices for moulds manufacturing for thermoplastics injection moulding
Bílik, J.Institute of Production Technologies (MTF)
D-STAM
MTF
prohlížet0 / 1--
282.DT
Research of fluxless soldering of metal matrix composites using ultrasonic energy
Department of Welding and Materials Joining (UVTE MTF)I-ZASMMTF
0 / 1
--
283.
DT
Reasearch of interactions on ceramics/composite soldered joint interfaceDepartment of Welding and Materials Joining (UVTE MTF)
I-ZASM
MTFprohlížet
0 / 1
--
284.
DisT
The research of thermoplastics injection moulding using non-conventional methods of mould manufacturingBílik, J.
Institute of Production Technologies (MTF)
D-STAM
MTF0 / 1--
285.
DisT
Research of components made by additive technologiesPokorný, P.
Institute of Production Technologies (MTF)
D-STAMMTFprohlížet0 / ----
286.
DisT
Research in the development of autonomous pressure sensor setup algorithms in calibration equipment for manufacturing systemsBožek, P.
Institute of Production Technologies (MTF)
D-VZAS
MTF
prohlížet
0 / --
--
287.
DT
Study of process parameters influence at seamless tubes drawing with aid of numerical simulationSobota, R.Institute of Production Technologies (MTF)I-PPN
MTF
0 / ----
288.
DT
Research of selected thermoplastic materials and their influence on the dimensional accuracy of the selected component in the process of Fused Deposition ModelingMilde, J.Institute of Production Technologies (MTF)I-PPN
MTF
prohlížet0 / 1--
289.DTResearch of laser beam welding of stainless steel to copperInstitute of Production Technologies (MTF)I-ZASMMTF0 / 1
--
290.DT
Research of electron beam welding of Ni a Ti
Hodúlová, E.
Institute of Production Technologies (MTF)
I-ZASMMTFprohlížet
0 / 1
--
291.
DisT
Research of weldability of stainless steel and copper by laser beam
Department of Welding and Materials Joining (UVTE MTF)
D-STM
MTF
0 / --
--
292.DisTResearch of weldability of stainless steel and copper by laser beamKovačócy, P.Institute of Production Technologies (MTF)D-STAM
MTF
0 / --
--
293.
DTHigh Speed MachiningPeterka, J.
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / --
--
294.
BTThe creation of application for design and calculation of the gating system for gravity casting
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet
0 / 1
--
295.
BT
Creation of e-learning modules for innovative education in pneumatic control laboratory
Institute of Production Technologies (MTF)
B-VZS
MTF
0 / 1
--
296.DT
Utilization of CA technologies for selected shape-complex product
Peterka, J.Institute of Production Technologies (MTF)
I-PPN
MTFprohlížet
1 / --
Kurtulík, A.
297.DT
Utilization of CA technologies in design and production for selected utility equipment
Peterka, J.
Institute of Production Technologies (MTF)
I-PPNMTF
0 / --
--
298.BT
Utilization of CA technologies in design and production of selected part
Peterka, J.Institute of Production Technologies (MTF)
B-PPT
MTFprohlížet
1 / --
Mejía, A.
299.
DTUtilization of CA technologies in design of technological robotic workplace
Institute of Production Technologies (MTF)
I-PPNMTF
0 / --
--
300.
BT
Utilizing digital tools of augmented and virtual reality in production factoryHolubek, R.Department of Production Devices and Systems (UVTE MTF)
B-VZS
MTF
prohlížet
0 / --
--
301.
BT
The use of beam technologies for soldering of stainless steel to copperKovaříková, I.
Institute of Production Technologies (MTF)
B-VTE
MTFprohlížet0 / 1
--
302.
DT
Using modeling and simulation of the machining process to determine the appropriate edge preparation of cutting tools
Institute of Production Technologies (MTF)I-PPN
MTF
0 / 1--
303.
DT
Modeling and simulation of the machining process in relation to prediction of the tool life
Institute of Production Technologies (MTF)
I-PPN
MTF
0 / 1
--
304.
DTThe use of computer aided for production and dimensional inspection of gas meter connection in the company Klimstahl s.r.o.Görögová, I.
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet
0 / 1
--
305.
BT
Application of soldering technologies for composite and ceramic materials joining in practice
Department of Welding and Materials Joining (UVTE MTF)
B-VTE
MTF
0 / 1
--
306.
BT
Welding and brazing of stainless steels to copper in practice
Institute of Production Technologies (MTF)
B-VTE
MTF
prohlížet
0 / 1
--
307.
DT
Virtual commissioning basic elements in the program TecnoMatix Plant Simulation: Design of a methodology
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
prohlížet
0 / --
--
308.
DTVirtual commissioning basic elements in the program TecnoMatix Plant Simulation: Case study using a SiL strategy
Department of Production Devices and Systems (UVTE MTF)
I-VZS
MTF
0 / --
--
309.
DT
Material flow improvement based on the implementation of a mobile robot in a production line of the company Faurecia s.r.o.
Department of Production Devices and Systems (UVTE MTF)I-VZSMTFprohlížet
0 / --
--
310.DTHigh-speed steel quality improvement using vacuum technologies of melting and castingČaus, A.
Department of Foundry and Powder Metallurgy (UVTE MTF)
I-VTVMMTF
1 / 1
311.
DisT
Wettability and interaction of special alloys at heating with electron beam
Institute of Production Technologies (MTF)
D-STAM
MTF0 / ----
312.DTChange of tribological properties using laser micro-machining on forming tools in the process of drawing seamless tubesNecpal, M.
Institute of Production Technologies (MTF)
I-PPNMTFprohlížet0 / 1--
313.
DTReducing the porosity of welded joints made of aluminum alloys using a laser beamBárta, J.
Department of Welding and Materials Joining (UVTE MTF)
I-VTVM
MTF
prohlížet
0 / --
--
314.DT
Laser beam welding of Inconel
Kovačócy, P.
Institute of Production Technologies (MTF)
I-VTVM
MTF
0 / 1
--
315.DT
Rail welding by Innershield method
Koleňák, R.
Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet0 / 1
--
316.
DT
Electron beam welding of copper - stainless steel lap joints
Institute of Production Technologies (MTF)
I-ZASM
MTF
prohlížet
0 / 1
--
317.
DT
Laser beam welding of copper - stainless steel lap joints
Institute of Production Technologies (MTF)
I-ZASMMTFprohlížet0 / 1--
318.DT
Welding of transit gas pipelines
Kovačócy, P.Institute of Production Technologies (MTF)I-ZASM
MTF
0 / 1
--
319.
DT
Forming tools lifetimeBílik, J.
Institute of Production Technologies (MTF)
I-OAT
MTFprohlížet
1 / 1
Rusková, A.
320.
DT
5-axis machining
Peterka, J.Institute of Production Technologies (MTF)
I-PPN
MTF
prohlížet0 / --
--